Přeskočit na hlavní obsah
  • Vkládejte objednávky snadno a rychle
  • Zobrazit objednávky a sledovat stav expedice
  • Vytvořte a přistupujte k seznamu svých produktů

Why Is My Dell System Not Going to Sleep Mode

Shrnutí: Your Dell computer does not fully go into sleep mode? Learn how to fix Dell computers that do not go to sleep by updating BIOS, drivers, adjusting settings, and more for Windows 11.

Tento článek se vztahuje na Tento článek se nevztahuje na Tento článek není vázán na žádný konkrétní produkt. V tomto článku nejsou uvedeny všechny verze produktu.

Příznaky

Affected Operating Systems:

  • Windows 10
  • Windows 11

If you are experiencing an issue with the Dell computer unable to enter the sleep mode, follow the troubleshooting steps in this article.

Příčina

Sleep mode related issues can be caused due to outdated BIOS, chipset, or video drivers, incorrect power settings in Windows, old or corrupt hiberfil.sys file, third-party software or applications, corrupt operating system files, and so on.

Řešení

Dell Technologies recommends updating the device drivers and BIOS as part of your scheduled update cycle. Device drivers and BIOS updates may contain feature enhancements or changes that help keep your system software current and compatible with other computer modules (hardware and software) as well as increased stability.

It is essential to update the following device drivers to resolve computer sleep-related issues:

  • BIOS
  • Chipset
  • Video or graphics card

Download and install the latest device drivers from the Dell Drivers & Downloads website.

To learn how to download and install the device drivers for your Dell computer, reference How to Download and Install Dell Drivers.

To learn how to download and update the BIOS on your Dell computer, see the Dell knowledge base article Dell BIOS Updates.

NOTE: If the BIOS is already updated to the latest version, reset the BIOS to factory defaults. To learn more, reference Dell BIOS Updates.

After updating the BIOS, chipset, and video driver, restart the computer and check if the computer can enter sleep mode. If the sleep mode issue persists, go to the next step.

Change the BIOS settings and Power Options settings in Windows.

NOTE: If using a mouse and keyboard, Ensure they are connected directly to the computer or docking station and not a USB hub.

BIOS

NOTE: For model-specific instructions to navigate the BIOS menu, see the User Manual of your Dell computer.
  1. Turn on the computer.
  2. At the Dell logo screen, tap F2 key several times until Entering BIOS or System Setup appears.
  3. In the BIOS, expand the Power Management option.
  4. Select USB Wake Support and check the box to Enable USB Wake Support.
  5. Click Apply at the bottom.
    Power Management settings in BIOS
  6. The Block Sleep Option (also called Deep Sleep Control) is only available on Desktop computers, clear it to Disable it, and click Apply at the bottom.
    Block Sleep (S3 State) in BIOS
  7. Save the settings and exit the BIOS.

Windows Power Options

  1. Click Start.
  2. In the search box, type Power Options.
  3. Click Power Options.
  4. Click Choose what the power buttons do on the left side of the window.
    Windows Power Options
  5. Click Change settings that are currently unavailable.
  6. Under Shutdown settings, ensure Turn on fast startup is cleared.
    Windows System Settings

After the BIOS and Windows Power Options are changed, check if the computer can enter sleep mode. If the sleep mode issue persists, go to the next step.

Power & sleep Settings Windows 10 (Official Dell Tech Support on YouTube)

Duration: 02:06
Closed captions: English only

Refresh the hiberfil.sys file by using the switch to disable and enable it (this resets the file if it is corrupted).

  1. Click Start.
  2. Type cmd or command prompt in the search box.
  3. Right-click Command Prompt and select Run as Administrator.
  4. In the command prompt window, type powercfg -h off and press Enter.
  5. Windows Command Prompt
  6. Restart the computer, and repeat steps 1 to 3.
  7. In the Command Prompt window, type powercfg -h on and press Enter to enable.
    Windows Command Prompt
  8. Restart the computer one more time. The hiberfil.sys file is refreshed.

After the hiberfil.sys file has been refreshed, check if the computer can enter sleep mode. If the sleep mode issue persists, go to the next step.

You can run the Windows Power Troubleshooter to adjust your computer's power settings. The Power Troubleshooter checks your computer's timeout settings, which determine how long the computer waits before turning off the monitor display or entering sleep mode.

NOTE: Adjusting these settings helps conserve power and extend the laptop's battery life.

To run the Windows Power Troubleshooter, follow these instructions:

  1. In Windows, search for and open the Control Panel.
  2. In the Control Panel Search field, type Troubleshooting.
  3. Click Troubleshooting.
    Windows Control Panel
  4. Under System and Security, click Improve Power Usage.
    Windows Troubleshooting
  5. Click Power to run the Troubleshooting tool.
    Windows System and Security
    A Detecting Issues window displays while Windows detects and attempts to fix any issues.
  6. After Troubleshooting is complete, close the Troubleshooter, or click Explore Additional Options if needed.

After Windows Power Settings have been adjusted, check if the computer can enter sleep mode. If the sleep mode issue persists, go to the next step.

To perform a Clean Boot using the Microsoft Config Utility on the computer, follow the steps below. This procedure is critical to avoid unnecessary operating system reinstall. This process is temporary and helps identify if a startup program or service is causing the sleep mode issue.

WARNING: Do not disable the startup program or service that is related to anti-virus or anti-malware applications such as McAfee, Norton, TrendMicro, and so on.
  1. Click Start.
  2. In the Search Box, type msconfig and press Enter.
  3. Click the Startup tab. Click Disable all and click Apply.
  4. Click the Services tab. Check the box that says Hide all Microsoft services and then click Disable all.
  5. Restart the computer.
  6. Check if the computer can enter sleep mode.

If the sleep mode issue persists, repeat the steps above to enable all the services and startup items. If the sleep mode issue persists, go to the next step.

If the issue is not present, you must reenable services and startup items one by one until the cause of the issue is identified.

To return the boot process to normal startup mode using MSCONFIG.

  1. Click Start.
  2. In the Search Box, type msconfig and press Enter.
  3. Click the General tab.
  4. Click Normal startup.
  5. Click OK.
  6. Click Yes when you are prompted to restart your computer.

If the sleep mode issue persists, go to the next step.

To create a new user in Windows, ensure you are logged in with an account that has administrator privileges.

NOTE: Different versions of Windows 10 and 11 may appear different than the steps listed below.

Windows 11

  1. Select Start > Settings > Accounts > Other Users
  2. Click the Add Account Button
  3. Click the I don't have this person's sign-in information
  4. Click the Add a user without a Microsoft account Option.
  5. Enter the username into the Who's going to use this PC? field
  6. If you would like to use a password, enter the password in the password fields. If you are not wanting a password, leave these fields blank.
  7. Click Next

Windows 10

  1. Select Start > Settings > Accounts > Family & other users
  2. Under Other users, select Add someone else to this PC.
  3. Click I don't have this person's sign-in information
  4. Click Add a user without a Microsoft account
  5. Enter the username into the Who's going to use this PC? field
  6. If you would like to use a password, enter the password in the password field. If you are not wanting a password, leave these fields blank.
  7. Click Next

After creating a new user account, login to the new user account and check if the computer can enter sleep mode. If the computer can enter sleep mode with the new user account, the issue is with the old user profile, continue to use the new user account. If the sleep mode issue persists in the new user account, go to the next step.

System Restore is an integrated Windows tool that is designed to protect and repair the operating system. When something goes wrong with your computer, System Restore should be used before restoring the computer to factory default settings.

Select the operating system that is installed on your computer to find more information about how to perform System Restore:

After the performing Windows System Restore, restart the computer and check if the computer can enter sleep mode. If the sleep mode issue persists, go to the next step.

The System File Checker (SFC) tool is built into Windows and can scan your Windows computer files for corruption or any other changes. If a file has been modified, it automatically replaces that file with the correct version.

You must have administrator privileges in Windows to run the system file checker tool.

  1. Click Start.
  2. Type cmd or command prompt in the search box.
  3. Right-click Command Prompt and select Run as Administrator.
  4. In the command prompt window, type sfc /scannow and press Enter.

After the SFC scan is complete, restart the computer and check if the computer can enter sleep mode. If the sleep mode issue persists, go to the next step.

If the above troubleshooting steps did not resolve the sleep mode issue, you can try to restore the computer to factory default settings as a last resort.

Dell computers are built with a small amount of hard disk space that is reserved for reinstalling the operating system. This method is the easiest way to restore the computer to factory condition. The restoration process deletes all user data from the computer, so be sure to back up all your files before beginning this process.

WARNING: Restoring the computer to factory defaults or reinstalling the operating system using any recovery media erases all data on the computer. Be sure to back up all important data like documents, spreadsheets, pictures, videos before restoring or reinstalling the operating system.

Select the operating system that is installed on your computer to find more information about how to restore the computer to factory default settings:

NOTE: After restoring or reinstalling the operating system, it is recommended that you download and install the latest device drivers from the Dell Drivers & Downloads website.

If the computer sleep mode issue persists, contact Dell Technical Support.

Další informace

Vlastnosti článku
Číslo článku: 000149580
Typ článku: Solution
Poslední úprava: 26 Sep 2024
Verze:  10
Najděte odpovědi na své otázky od ostatních uživatelů společnosti Dell
Služby podpory
Zkontrolujte, zda se na vaše zařízení vztahují služby podpory.