Přeskočit na hlavní obsah
  • Vkládejte objednávky snadno a rychle
  • Zobrazit objednávky a sledovat stav expedice
  • Vytvořte a přistupujte k seznamu svých produktů

How to Determine the Signature Version for VMware Carbon Black

Shrnutí: How to find out what the latest virus definition for VMware Carbon Black is and what the current installed virus definition is on an endpoint.

Tento článek se vztahuje na Tento článek se nevztahuje na Tento článek není vázán na žádný konkrétní produkt. V tomto článku nejsou uvedeny všechny verze produktu.

Pokyny

Affected Products:

  • VMware Carbon Black

This article discusses how to check the local signature version for VMware Carbon Black. VMware Carbon Black uses a technology that is called Virus Definition Files (VDF) to load signatures for use locally. Several methods are available to validate the latest VDF version and the VDF version that is installed on an endpoint.

Table of Contents

How to check the latest VDF Version available online

To verify the latest VDF version available and the Published Date open the link below:
https://www.carbonblack.com/vdflookup/ This hyperlink is taking you to a website outside of Dell Technologies.

VDF History Search Page

Back to Top

How to check the current VDF version on an endpoint using the VMware Carbon Black Cloud console

It is possible to verify the VDF version that is installed on a specific endpoint following the steps below:

  1. Log in to the Carbon Black Cloud console.
  2. Go to Endpoints page:
    Click Endpoints
  3. Search for a specific endpoint by name or using the available filters:
    Search for endpoint
  4. Hover the hover over the sign in the SIG column and wait for the text to appear showing the VDF Version installed on the endpoint:
    Hover over SIG field

Back to Top

How to check the local installed VDF version on an endpoint

With online access not always being available, it is possible to check the local signature version on the endpoint through RepCLI. Approved administrators through CLI_USERS do not have to have been set to leverage this method.

  1. Log in to the endpoint with an administrative user.
  2. Right-click Start > Run.
  3. In the Run dialog box type cmd and click OK to open a Command Prompt:
    Run cmd
  4. Browse to the folder C:\Program Files\Confer typing the command:
    cd C:\Program Files\Confer
  5. To check the VDF version run the command below:
    Repcli status

    The Local Scanner Version correlates to the version of the VDF files on the endpoint.
    Run commands in Command Prompt
    Note: If a policy disables On-Access Scanning, or if no signature files have been updated on the endpoint, the Local Scanner Version may be blank.

Back to Top

How to force the VDF version to update using RepCLI

To update the local signature version on the endpoint through RepCLI Follow the below steps.

  1. Log in to the endpoint with an administrative user.
  2. Right-click Start > Run.
  3. In the Run dialog box type cmd and click OK to open a Command Prompt:
    Run cmd
  4. Browse to the folder C:\Program Files\Confer typing the command:
    cd C:\Program Files\Confer
  5. To update the VDF version, run the command below:
    Repcli updateavsignature -wait

    Run commands in Command Prompt

Back to Top


To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.

Dotčené produkty

VMware Carbon Black
Vlastnosti článku
Číslo článku: 000126416
Typ článku: How To
Poslední úprava: 08 Aug 2024
Verze:  11
Najděte odpovědi na své otázky od ostatních uživatelů společnosti Dell
Služby podpory
Zkontrolujte, zda se na vaše zařízení vztahují služby podpory.