PowerEdge: Assign and Unassign hot spare in system setup in PERC Controller 10

This article provides the information of how to assign or unassign a global dedicated hot spare for a physical disk drive.

• A dedicated hot spare is assigned to only one virtual disk on the controller.
• A Global hot spare is assigned to all virtual disks on the controller.

Dell PowerEdge RAID Controller 10 (PERC H740P, PERC H745P MX, PERC H840) supports this feature. 
See the Dell PowerEdge RAID Controller manual for more information.

Table of Contents

1. Going to Dell PERC 10 configuration utility. 

2. Assign a global hot spare

3. Assign a dedicated hot spare

4. Unassign a hot spare

1.Navigating to the Dell PERC 10 configuration utility 

Perform the following steps to boot to the HII configuration utility:

1. Turn on the system.
2. While the system startup, press F2 to enter System Setup. 
   
    
3. Click Device Settings, all RAID controllers in the system list in the Device Settings screen.
   To access the main menu for the controller, use the arrow keys or the mouse.
   |
   
   
    

2.Assign a global hot spare

To assign a global hot spare from the HII Configuration Utility, perform the following steps:   

1. Enter the Dell PERC 10 Configuration Utility. See Going to Dell PERC 10 configuration utility. 
2. Click Main Menu > Physical Disk Management. The list of physical disks is displayed.
   
    
3. Select the physical disk.
   
    
4. From the Operations drop-down menu, select Assign Global Hot Spare.
   
    
5. Click Go. A screen is displayed asking if you are sure you want to perform the operation.
   
    
6. Select the Confirm option.
7. Click Yes. The global hot spare disk is created successfully.
   
    
8. You can check the status of the physical disk.
   
    

3.Assigning dedicated hot spare

To assign a dedicated hot spare from the HII Configuration Utility, perform the following steps:

1. Enter the Dell PERC 10 Configuration Utility. See Going to Dell PERC 10 configuration utility. 
2. Click Main Menu > Physical Disk Management. The list of physical disks is displayed.
   
    
3. Select the physical disk.
   
    
4. From the Operations drop-down menu, select Assign Dedicated Hot Spare. 
   
    
5. Click Go. Select the associate virtual to the dedicated hot spare.
   
    
6. Select the Confirm option. 
7. Click Yes. The dedicated hot spare disk is created successfully.
   
    
8. You can check the status of the physical disk.
   
    

4.Unassign a hot spare

To unassign a hot spare from the HII Configuration Utility, perform the following steps:   

1. Enter the Dell PERC 10 Configuration Utility. See Going to Dell PERC 10 configuration utility. 

2. Click Main Menu > Physical Disk Management, and the list of physical disks is displayed.
   
    
3. Select the hot spare you want to unassign.
4. From the Operations drop-down menu, select Unassign Hot Spare.
   
    
5. Select the Confirm option. 
6. Click Yes. The hot spare disk is unassigned successfully.
   
    
7. You can check the status of the physical disk.
   
    

Related Resources
Here are some recommended resources related to this topic that might be of interest: