How to Run the Dell D2720DS Monitor Self-Test
Summary: This article provides information about running the self-test on Dell D2720DS monitors.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Monitor Self-Test
The D2720DS monitor has a self-test (burn-in mode) that helps you determine if any screen abnormality you experience is an inherent problem with your monitor, video cable, video card, drivers, or computer.
Steps for running the self-test:
- Disconnect all video cables from the monitor and turn off your monitor.
- Press and hold button 5 (Figure 1), then press the power button to turn on the monitor.
Figure 1
The monitor starts the self-test (burn-in mode). - Carefully inspect the screen for abnormalities as the display turns to red, green, blue, black, and white automatically.
- Press the power button to exit the self-test.
If you do not detect any screen abnormalities while using the self-test tool, the monitor is functioning properly. Check your video cable, video card, drivers, and computer.
Affected Products
Dell D2720DSArticle Properties
Article Number: 000188983
Article Type: How To
Last Modified: 20 سبتمبر 2024
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.