Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

M.2 NVMe Device Specifications and Upgrade Requirements for Precision, OptiPlex, Latitude, and XPS Systems

Summary: This article describes M.2 Specifications and Requirements for Dell systems supporting M.2 devices.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Instructions

The original SATA protocol was designed to maximize the performance of platter (physical spinning) hard drives. With the proliferation of SSD drives, the SATA storage management protocol has become a limiting factor. The NVMe (Non-Volatile Memory) protocol has been designed for solid state drives and uses the PCIe bus for optimal performance. An M.2 drive may support SATA or PCIe/NVMe but not both. Depending on the drive, and what the computer can support, not all M.2 drives work in all computers.

M.2 storage devices are classified numerically based on performance. The higher the Class, the faster the overall performance:

SSD Performance


Precision Systems

System Maximum internal drives supported Drive configurations supported (max) PCIe lanes Parts to install a M.2 device into a M.2 slot Parts to install a M.2 device into a 2.5-inch bay Additional information
7710
7720
3 3x M.2
1 x 2.5-inch
2 x M.2 + 1 x 2.5-inch
M.2 slots support 4X.

2.5-inch supports 2 x.
1 x HR8P8 - Thermal cover (includes cover and thermal pad)
1 x 4270E - Screw (secures cover on top of the M.2 drive).
1 x 745TM - 2.5-inch metal bracket (most units already include this part).
1 x Y1WJX - M.2 bracket (mounts to 745TM).
4x 2864D - M3X3 screw(most computers include these. These secure the Y1WJX M.2 drive carrier, or a 2.5-inch drive into 745TM)
1 x WPTND - M.2 Interposer Board(installs into Y1WJX)
5x 4270E - M2.0*3 L screws
1 x HR8P8 - M.2 thermal cover
Find instructions on the Dell Community Forum page.
7510
7520
2 1 x M.2
1 x 2.5-inch
2 x M.2
1 x M.2 + 1 x 2.5-inch
M.2 slot supports 4X.

2.5-inch supports 2 x.
  1 x 745TM - 2.5-inch metal bracket (most computers include this part).
1 x Y1WJX - M.2 bracket (mounts to 745TM).
4x 2864D - M3X3 screw(most computers include these. These secure the Y1WJX M.2 drive carrier, or a 2.5-inch drive into 745TM)
1 x WPTND - M.2 Interposer Board(installs into Y1WJX)
5x 4270E - M2.0*3 L screws
1 x HR8P8 - M.2 thermal cover
Find instructions here on the Dell Community Forum.
5510
5520
2 1 x M.2
1 x 2.5-inch
1 x M.2 + 1 x 2.5-inch
M.2 slot supports 4X.

2.5-inch bay is wired as SATA.
1 x 88DJK - Thermal pad (no plate required)
1 x 4270E - M2 x3 screw
1 x XDYGX - Cable
2 x 3XYT5 - Rubber side isolator
1 x 3FDY3 - Metal hard drive bracket (some units may already have this installed even if a 2.5-inch drive was not ordered from Dell originally).
Discussed on the Dell Community Forum page
3510 1 1 x M.2
1 x 2.5-inch
M.2 slot supports 4X.

2.5-inch bay is wired as SATA.
  1 x X3YR8 - M.2 end bracket
1 x 1 x2MT - Thermal cover
2 x 4270E - M2 x3 screws
Discussed here on SpiceWorks This hyperlink is taking you to a website outside of Dell Technologies.
3520 2 1 x M.2
1 x 2.5-inch
1 x M.2 cache drive + 1 x 2.5-inch
M.2 slot supports 4X.

2.5-inch bay is wired as SATA.
  1 x 2FFR0 - End bracket
1 x X3DN4 -Thermal plate
1 x 4270E - End screw
 

Latitude Systems

System Maximum internal drives supported Drive configurations supported (max) PCIe lanes Parts needed to install a M.2 device into a M.2 slot Parts needed to install a M.2 device into a 2.5-inch bay Additional information
E5270
E5470
E5570
1 1 x M.2
1 x 2.5-inch
E5270 supports 2 x.
E5570 supports 4X (w/ H processor).
E5570 supports 2 x (w/ U processor).
E5470 supports 2 x (w/ H or U processor).
2.5-inch bay is wired as SATA.
  1 x X3YR8 - M.2 end bracket
1 x 1 x2MT - Thermal cover
2 x 4270E - M2 x3 screws
 
5280
5480
5580
2 1 x M.2
1 x 2.5-inch
1 x M.2 cache drive + 1 x 2.5-inch
5280 supports 2 x.
5580 supports 4X (w/ H processor).
5580 supports 2 x (w/ U processor).
5480 supports 4X (w/ H processor).
5480 supports 2 x (w/ U processor).
2.5-inch bay is wired as SATA.
  1 x X3YR8 - M.2 end bracket
1 x 1 x2MT - Thermal cover
2 x 4270E - M2 x3 screws
 
E7270
E7470
1 1 x M.2 M.2 slot supports 2 x. 1 x DJ69P - Thermal cover
2 x 4270E - Screw M2 x3 (most computers include one of these).
  Discussed here on SpiceWorks This hyperlink is taking you to a website outside of Dell Technologies.
7280
7480
1 1 x M.2 M.2 slot supports 2 x. 1 x R6TGF - Thermal cover
2 x VJYP9 - Screw M2 x3 (most computers include one of these).
   

XPS Systems

System Maximum internal drives supported Drive configurations supported (max) PCIe lanes Parts needed to install a M.2 device into a M.2 slot Parts needed to install a M.2 device into a 2.5-inch bay Additional information
9350
9360
1 1 x M.2 M.2 slot supports 4X. 1 x 4270E - Screw M2 x3    
9365 1 1 x M.2 M.2 slot supports 4X. 1 x 4HP13 - Thermal plate
2 x JPRFM - M1.6x2.5 screws
   
9550
9560
2 1 x M.2
1 x 2.5-inch
1 x M.2 + 1 x 2.5-inch
M.2 slot supports 4X.
2.5-inch bay is wired as SATA.
1 x 88DJK - Thermal pad (no plate required)
1 x 4270E - M2 x3 screw
1 x XDYGX - Cable
2 x 3XYT5 - Rubber side isolator
1 x 3FDY3 - Metal hard drive bracket (some units may include this part even if a 2.5-inch drive was not ordered from Dell originally).
Discussed here on Dell Community Forums

OptiPlex Systems

System Maximum internal drives supported Drive configurations supported (max) PCIe lanes Parts needed to install a M.2 device into a M.2 slot Parts needed to install a M.2 device into a 2.5-inch bay Additional information
5040
7040
(MT)
2 1 x M.2
1 x M.2
1 x M.2 + 1 x 2.5-inch
2 x 2.5-inch
1 x 3.5"
M.2 slot supports 4X. 1 x R7HGK - Thermal pad(installs onto the motherboard under the M.2 drive)

1 x YYJF8 - Screw M2 x3.5
1 x 6J3FV - SATA cable

1 x X9FV3 - M.2/2.5-inch bay adapter/caddy
Motherboard M.2 installation instructions are found here.
3050
5050
7050
(MT)
2 1 x M.2
1 x 2.5-inch
1 x 3.5"
2 x 2.5-inch
1 x M.2 + 1 x 2.5-inch
1 x M.2 + 1 x 3.5"
M.2 slot supports 4X.

Installing a M.2 device into the 2.5/3.5" bay is not supported.
1 x DHR6X - Spacer (between the motherboard and M.2 drive)   Motherboard M.2 installation instructions are found here.
Note: For computers not referenced above, see your computers manual available for download from https://www.dell.com/support/home

Other M.2 Resources

Operating computer Install Notes:

There is an updated storage driver (IRST F6) to include PCIE support. (to enable Windows to recognize the drive during installation):

Obtaining an ISO Image from the Windows Operating Systems Support Site.

NOTE: Not all computers and service tags have an image available for download.
NOTE: Even though Dell-Hosted Images have USB3 drivers slip streamed in, they may not include the IRST driver (also known as the F6 driver). As a result, the IRST driver must be applied manually during the Windows install process.

M.2 Knowledgebase Articles:

Additional Information

Affected Products

Latitude 5280/5288, Latitude 7280, Latitude 5480/5488, Latitude 7480, Latitude 5580, Latitude E5270, Latitude E5470, Latitude E5570, Latitude E7270, Latitude E7470, OptiPlex 3050 All-In-One, OptiPlex 3050 Tower, OptiPlex 3050 Micro , OptiPlex 3050 Small Form Factor, OptiPlex 5040 Tower, OptiPlex 5040 Small Form Factor, OptiPlex 5050 Tower, OptiPlex 5050 Micro, OptiPlex 5050 Small Form Factor, OptiPlex 7040 Tower, OptiPlex 7040 Micro, OptiPlex 7040 Small Form Factor, OptiPlex 7050 Tower, OptiPlex 7050 Micro, OptiPlex 7050 Small Form Factor, Precision 5520, Precision 7520, Precision 7720, Precision 5510, Precision 7510, Precision 7710, XPS 13 9350 (End of Life), XPS 13 9360, XPS 13 9365 2-in-1, XPS 15 9550, XPS 15 9560 ...
Article Properties
Article Number: 000178253
Article Type: How To
Last Modified: 31 أكتوبر 2024
Version:  13
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.