Dell Enterprise HDD : What is the meaning of LED on Physical Drives (PD) ?
Summary: Explanation of the backplane LED indicators.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Note: This article is part of the Server Tutorials: "Raid and Disks" available here .
On hotswap drives, the backplane provides two LED indicators per drive that transmit light to the top of their respective caddies.
- The light on the left is managed by the drive itself and indicates activity on the drive.
- The indicator on the right is controller by the backplane in conjunction with the storage controller and is used to indicate drive status.
This article explains the differents states possible of the physical drive:
 |
1 . physical disk activity indicator 2 . physical disk status indicator 4 . physical disk eject button |
| Drive-status indicator pattern (RAID only) | Condition |
| Blinks green two times per second | Identifying drive or preparing for removal. |
| Blinks green, amber, and turns off | Predicted drive failure |
| Blinks amber four times per second | Drive failed |
| Blinks green slowly | Drive rebuilding |
| Steady green | Drive online |
| Blinks green three seconds, amber three seconds, and turns off six seconds |
Rebuild aborted |
| Off | Ready for insertion/removal or not detected |
Cause
-
Resolution
-
Affected Products
PowerEdgeArticle Properties
Article Number: 000143247
Article Type: Solution
Last Modified: 14 أكتوبر 2021
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.