Unknown Devices Appearing in PCI Passthrough Configuration in ESXi 5.1 on a Blade in a PowerEdge VRTX Chassis
Résumé: This article provides information on issues with unknown devices appearing in PCI passthrough configuration in ESXi 5.1 on a blade in a PowerEdge VRTX chassis.
Cet article concerne
Cet article ne concerne pas
Cet article n’est associé à aucun produit spécifique.
Toutes les versions du produit ne sont pas identifiées dans cet article.
Symptômes
Issue :
The bridges are displayed as unknown devices in PCI passthrough configuration page in VMware ESXi 5.1.
Discussion :
This is a cosmetic issue with the PCI passthrough. Functionally, it works fine for the supported devices. The reason is pci.ids available in PCI source forge site was not carrying Next IO and PLX Bridge's device IDs. Though the source forge is updated with the IDs now, ESXi 5.1 does not carry these hence the devices are marked as unknown.
Resolution :
VMware is aware of the issue and the updated pci.ids is going to be part of the ESXi 5.1 update 2 release.
Cause
-
Résolution
-
Produits concernés
Dell Chassis Management Controller Version 3.0 for Dell PowerEdge VRTX, VMware ESXPropriétés de l’article
Numéro d’article: 000137748
Type d’article: Solution
Dernière modification: 14 août 2024
Version: 4
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.