Dell PowerVault 120T DLT Autoloader, v.D116, A01
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Firmware for the Dell PowerVault 120T DLT4000/7000 autoloader.
This release contains firmware for the autoloader, DLT4000 tape drive, and DLT7000 tape drive.
This release contains firmware for the autoloader, DLT4000 tape drive, and DLT7000 tape drive.
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
No fixes/enhancements. This is a repackaging of previously released firmware.
閱讀更多繁體中文版
D116, A01
發佈日期
23 7月 2004
下載類型
韌體
類別
磁帶機
重要性
選用Dell Technologies 建議您檢閱此更新,以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態,或其提供的新功能不一定適用於您的環境。
檔案格式: ZipPack 外接
檔案名稱: R82137.EXE
檔案大小: 4.86 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
不適用
SHA1:
不適用
SHA-256:
不適用
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
Custom Instructions for R82137.EXE:
Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to upzip the files (the default location is x:\dell\drivers\R82137).
4. Click on the OK button to extract files.
5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.
Installation
1. Locate the readme.htm file in the directory to which you unzipped the files. This file contains the installation instructions for the files listed below:
NOTE: x: represents the drive where the files were unzipped
PowerVault 120T Tape Autoloader Application Code D116 is located in x:\Dell\Drivers\R82137\Autoloader
PowerVault 120T DLT4000 Tape Drive Firmware D782 (v130) is located in x:\Dell\Drivers\R82137\DLT4000
PowerVault 120T DLT7000 Tape Drive Firmware 2561 (v97) is located in x:\Dell\Drivers\R82137\DLT7000
Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to upzip the files (the default location is x:\dell\drivers\R82137).
4. Click on the OK button to extract files.
5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.
Installation
1. Locate the readme.htm file in the directory to which you unzipped the files. This file contains the installation instructions for the files listed below:
NOTE: x: represents the drive where the files were unzipped
PowerVault 120T Tape Autoloader Application Code D116 is located in x:\Dell\Drivers\R82137\Autoloader
PowerVault 120T DLT4000 Tape Drive Firmware D782 (v130) is located in x:\Dell\Drivers\R82137\DLT4000
PowerVault 120T DLT7000 Tape Drive Firmware 2561 (v97) is located in x:\Dell\Drivers\R82137\DLT7000