Dell 32 Bit Diagnostics (Graphical User Interface version), A1205
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Dell 32 bit Diagnostics v1205
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
DellDiag.exe has been replaced with a graphic user interface version.
閱讀更多繁體中文版
A1205, A1205
發佈日期
30 1月 2003
下載類型
診斷公用程式
類別
診斷程式
重要性
選用Dell Technologies 建議您檢閱此更新,以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態,或其提供的新功能不一定適用於您的環境。
檔案格式: 將檔案直接解壓縮至本機磁碟
檔案名稱: CDD1205.exe
檔案大小: 1.7 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
檔案格式: 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱: CD120510.exe
檔案大小: 2.3 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
不適用
SHA1:
不適用
SHA-256:
不適用
檔案格式: ZipPack 外接
檔案名稱: Cz120500.exe
檔案大小: 1.4 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
不適用
SHA1:
不適用
SHA-256:
不適用
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
If a system has more than 4GB of memory installed, the configuration data display for the memory module will not report the memory size properly.
Default Instructions for CDD1205.exe:
Diskette creation using CDD1205.exe
Download file CDD1205.EXE to a new folder on your system.
1. Click the "Download now" link.
2. If the Export Compliance Disclaimer window appears, please read the
agreement, and then click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save this program to disk
and click OK.
4. The Save As window appears.
5. From the Save In drop-down menu, click to select one of your hard drive
partitions.
6. Click on the Create New Folder icon.
7. Rename the new folder as DD1205, and press Enter.
8. Click on the Open button in the Save As window.
9. Click the Save button to save file CDD1205.exe in the new folder DD1205.
10. The file will download to this folder.
11. If a Download Complete window appears, click Close.
Diskette Creation
1. From My Computer, or Explorer select the folder DD1205 and double-click
the icon for CDD1205.
2. An MS-DOS window appears with a message indicating the options
available.
3. Use option 1 to create bootable diskettes.
3. Press the [1] key. A message appears prompting you to insert a blank
diskette. Insert a diskette into the drive.
4. Press the [ENTER] key. A message appears indicating how many diskettes
will be needed.
5. The files are copied to the diskette. Once the files have been copied
to the diskette a message appears prompting you to insert the next
diskette.
6. Repeat steps 4 - 5 until you reach the end of the diskette set. Label
each diskette with a disk number starting from 1.
7. After all the files have been copied to the last diskette, press the
[ENTER] key and the MS-DOS window closes.
Running the Diagnostics
1. Insert the first diskette of the set into your diskette drive.
2. Click Start, click Shutdown, click Restart, and then click OK to reboot
your system.
3. Follow the on-screen instructions.
Default Instructions for Cz120500.exe:
Hard Drive Installation using CZ120500.exe
Download
1. Click the location, e.g. Americas, from which you want to download the
file.
2. If the Export Compliance Disclaimer window appears, click Yes, I Accept
this Agreement.
3. When the File Download window appears, click Save this program to disk
and click OK. The Save In window appears.
4. From the Save In drop-down menu click to select Desktop and then click
Save. The file will download to your desktop.
5. If a Download Complete window appears, click Close. A new icon appears
on your desktop.
Install
1. Double-click the new icon on the desktop labeled CZ120500.exe.
2. When the Self-Extractor window appears, click Continue.
3. A dialog box will prompt you for the directory to unzip the files to.
Normally you should leave the default path. This path must be on an MS-DOS
FAT partition. If you extract the files to any other type of partition
(for example NTFS) you will not be able to run the diagnostics. Write down
the path where the files were placed.
4. Click OK.
5. If you get a prompt asking you if you would like to create the
directory, click YES.
6. After a few seconds a dialog box will appear that says that all files
were successfully unzipped. Click OK to exit from the installer.
Running the Diagnostics from a Hard Drive
1. In order to run the diagnostics you must boot to an MS-DOS prompt. If
necessary create a DOS boot disk. For more information, refer to Dell
Knowledge Base Article TT1014475 - "What can I use for a boot disk with CD-
ROM support?"
2. Insert the diskette into the diskette drive and reboot the computer.
3. At the A:/> prompt, type "C:" (or the drive letter where you saved the
diagnostics to) and then press the [ENTER] key.
4. Type "cd c:\dell\drivers\Rxxxx" (or the path that you specified above)
and then press [ENTER].
5. Type "Delldiag" and then press [ENTER] to run the diagnostics.
6. Follow the on-screen instr
Diskette creation using CDD1205.exe
Download file CDD1205.EXE to a new folder on your system.
1. Click the "Download now" link.
2. If the Export Compliance Disclaimer window appears, please read the
agreement, and then click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save this program to disk
and click OK.
4. The Save As window appears.
5. From the Save In drop-down menu, click to select one of your hard drive
partitions.
6. Click on the Create New Folder icon.
7. Rename the new folder as DD1205, and press Enter.
8. Click on the Open button in the Save As window.
9. Click the Save button to save file CDD1205.exe in the new folder DD1205.
10. The file will download to this folder.
11. If a Download Complete window appears, click Close.
Diskette Creation
1. From My Computer, or Explorer select the folder DD1205 and double-click
the icon for CDD1205.
2. An MS-DOS window appears with a message indicating the options
available.
3. Use option 1 to create bootable diskettes.
3. Press the [1] key. A message appears prompting you to insert a blank
diskette. Insert a diskette into the drive.
4. Press the [ENTER] key. A message appears indicating how many diskettes
will be needed.
5. The files are copied to the diskette. Once the files have been copied
to the diskette a message appears prompting you to insert the next
diskette.
6. Repeat steps 4 - 5 until you reach the end of the diskette set. Label
each diskette with a disk number starting from 1.
7. After all the files have been copied to the last diskette, press the
[ENTER] key and the MS-DOS window closes.
Running the Diagnostics
1. Insert the first diskette of the set into your diskette drive.
2. Click Start, click Shutdown, click Restart, and then click OK to reboot
your system.
3. Follow the on-screen instructions.
Default Instructions for Cz120500.exe:
Hard Drive Installation using CZ120500.exe
Download
1. Click the location, e.g. Americas, from which you want to download the
file.
2. If the Export Compliance Disclaimer window appears, click Yes, I Accept
this Agreement.
3. When the File Download window appears, click Save this program to disk
and click OK. The Save In window appears.
4. From the Save In drop-down menu click to select Desktop and then click
Save. The file will download to your desktop.
5. If a Download Complete window appears, click Close. A new icon appears
on your desktop.
Install
1. Double-click the new icon on the desktop labeled CZ120500.exe.
2. When the Self-Extractor window appears, click Continue.
3. A dialog box will prompt you for the directory to unzip the files to.
Normally you should leave the default path. This path must be on an MS-DOS
FAT partition. If you extract the files to any other type of partition
(for example NTFS) you will not be able to run the diagnostics. Write down
the path where the files were placed.
4. Click OK.
5. If you get a prompt asking you if you would like to create the
directory, click YES.
6. After a few seconds a dialog box will appear that says that all files
were successfully unzipped. Click OK to exit from the installer.
Running the Diagnostics from a Hard Drive
1. In order to run the diagnostics you must boot to an MS-DOS prompt. If
necessary create a DOS boot disk. For more information, refer to Dell
Knowledge Base Article TT1014475 - "What can I use for a boot disk with CD-
ROM support?"
2. Insert the diskette into the diskette drive and reboot the computer.
3. At the A:/> prompt, type "C:" (or the drive letter where you saved the
diagnostics to) and then press the [ENTER] key.
4. Type "cd c:\dell\drivers\Rxxxx" (or the path that you specified above)
and then press [ENTER].
5. Type "Delldiag" and then press [ENTER] to run the diagnostics.
6. Follow the on-screen instr