請勿在更新 BIOS 時將電腦關機或拔除電源,電腦可能因此受損。更新期間,電腦將重新啟動,並且會暫時顯示黑色畫面。
更新前,請閱讀以下所述的安裝說明與重要資訊。
Dell EMC Server BIOS for DSS 9600/9620/9630 & DCS 9650/9660R/9670/9690 Version 1.3.7
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
This release contains new Intel Xeon Processor Scalable Family Processor Microcode to address CVE-2017-5715. CVE-2017-5753 and CVE-2017-5754 do not require a microcode update. This release contains BIOS firmware version 1.3.7 for Dell EMC Server PowerEdge DSS9600/9620/9630 & DCS9650/9660R/9670/9690.
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes:
* Rarely, the system may stop at POST (Power-On-Self-Test) when running reboot test in the BIOS boot mode.
* Several NVMe-related defects are resolved.
* It takes too long in the memory correctable Error-Correcting Code (ECC) logging System Management Interrupt (SMI), which impacts the Omni-Path Architecture Host Fabric Interface (OPA HFI) network performance. Fixed it by removing the redundant data logged to Serial Presence Detection (SPD) to reduce the SMI time from hundreds to several milliseconds.
* Resolved an Intel Management Engine related issue that caused the BIOS version update to fail (fails only when the server was turned on continuously for 24 days since the previous AC power cycle).
- To work around this issue, AC power cycle the system or run the iDRAC RACADM power cycle command before updating the BIOS.
Warning: Running an iDRAC RACADM power cycle command while running an operating system causes an ungraceful shutdown.
- However, this remedy becomes effective only if the device is updated with this BIOS 1.3.7 version.
- The first attempt to upgrade to this 1.3.7 version will fail, but the second attempt will pass if done within 24 hours after the first attempt.
- For more information about the safe power-cycle procedures, see PSQN SLN 309027 here:
http://www.dell.com/support/article/us/en/04/SLN309027
Enhancements:
* Updated the Intel Trusted Execution Technology (Intel TXT) BIOS Authenticated Code Module (ACM) to version 1.3.4.
* Updated the Intel Processor and Memory Reference Code to PLR3.1.
* To address CVE-2017-5715 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5715).
- Updated the Intel Xeon Processor Scalable Family Processor Microcode to version 0x43.
- CVE-2017-5753 and CVE-2017-5754 are addressed by Operating System & Hypervisor updates.
- For more information, visit http://www.dell.com/support/article/SLN308588
閱讀更多* Rarely, the system may stop at POST (Power-On-Self-Test) when running reboot test in the BIOS boot mode.
* Several NVMe-related defects are resolved.
* It takes too long in the memory correctable Error-Correcting Code (ECC) logging System Management Interrupt (SMI), which impacts the Omni-Path Architecture Host Fabric Interface (OPA HFI) network performance. Fixed it by removing the redundant data logged to Serial Presence Detection (SPD) to reduce the SMI time from hundreds to several milliseconds.
* Resolved an Intel Management Engine related issue that caused the BIOS version update to fail (fails only when the server was turned on continuously for 24 days since the previous AC power cycle).
- To work around this issue, AC power cycle the system or run the iDRAC RACADM power cycle command before updating the BIOS.
Warning: Running an iDRAC RACADM power cycle command while running an operating system causes an ungraceful shutdown.
- However, this remedy becomes effective only if the device is updated with this BIOS 1.3.7 version.
- The first attempt to upgrade to this 1.3.7 version will fail, but the second attempt will pass if done within 24 hours after the first attempt.
- For more information about the safe power-cycle procedures, see PSQN SLN 309027 here:
http://www.dell.com/support/article/us/en/04/SLN309027
Enhancements:
* Updated the Intel Trusted Execution Technology (Intel TXT) BIOS Authenticated Code Module (ACM) to version 1.3.4.
* Updated the Intel Processor and Memory Reference Code to PLR3.1.
* To address CVE-2017-5715 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5715).
- Updated the Intel Xeon Processor Scalable Family Processor Microcode to version 0x43.
- CVE-2017-5753 and CVE-2017-5754 are addressed by Operating System & Hypervisor updates.
- For more information, visit http://www.dell.com/support/article/SLN308588
繁體中文版
1.3.7, 1.3.7
發佈日期
18 2月 2018
下載類型
系統 BIOS
類別
BIOS
重要性
緊急Dell Technologies 強烈建議儘快套用此重要更新。此更新包含的重大錯誤修正和變更,可改善 Dell 系統功能、可靠性及穩定性。其也可能包含安全性修正和其他增強功能。
檔案格式: 適用於 MS Windows (64 位元) 的更新套件。
檔案名稱: BIOS_2MK59_WN64_1.3.7.EXE
檔案大小: 26.38 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
如果 Dell 更新套件為原生 Microsoft Windows 64 位元格式,則不需要在 Microsoft Windows Server 安裝 Microsoft WOW64。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
1684c1331a5c2d77b98f5f5ca13357f6
SHA1:
8efda2ffeca49a3220ebfb041121a6687e884359
SHA-256:
13ae28e2fea6db537bf3be6711f16dd838ec71ac0af9f0b07f96e207aa0cd41c
檔案格式: 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱: BIOS_2MK59_LN_1.3.7.BIN.sign
檔案大小: 226 Bytes
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章,在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
73c851110e806f5c66f4b51e22133fea
SHA1:
fd684e4e9f51f73e7e26653f6487a92f3759115c
SHA-256:
aee9639c06bb54cb3d8f88c2b9ae89d2a43f16b2d8f8501771c6799bbdf2ed99
檔案格式: 適用於 Red Hat Linux 的更新套件
檔案名稱: BIOS_2MK59_LN_1.3.7.BIN
檔案大小: 26.74 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式,確保符合特定的驗證條件,然後套用更新。
注意:適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案,瞭解詳情。
注意:適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案,瞭解詳情。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
dc8f53821d7980461d470f8855d82416
SHA1:
59e844d3fa37db74af11126746a1578aaa98cc41
SHA-256:
54b3de3f84caecd4c96a062008735551d7ae66b3af9f986908ae1066e0b152c6
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
An Intel Management Engine related issue that caused the BIOS update to fail is resolved in this BIOS 1.3.7 version. See the Fixes section in this Release Notes.
PowerEdge BIOS
SWB,GHOST,BIOS,Q1FY19
Dell Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
---------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2.Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
---------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2.Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign