Samsung SSD PM851 Firmware Update
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
This package provides the firmware update for Samsung SSD PM851 and is supported on Alienware Notebook, Inspiron, Latitude, XPS Desktop and XPS Notebook models running the following Windows operating systems: Windows 7, Windows 8 and Windows 8.1.
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes
- Not Applicable.
Enhancements
- Improved SSD firmware robustness on exit from DEVSLP routine.
閱讀更多- Not Applicable.
Enhancements
- Improved SSD firmware robustness on exit from DEVSLP routine.
繁體中文版
EXT49D0Q, A00
發佈日期
11 7月 2014
下載類型
韌體
類別
儲存
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容,並且可能包含其他新功能。
檔案格式: 韌體影像
檔案名稱: EXT49D0Q.zip
檔案大小: 1.18 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
為了確保下載的完整性,請驗證總和檢查值。
MD5:
90841eb0cebde20fbafd9f4206fbda7d
SHA1:
b4c85e355144863d60c83f2673af973387ce0c5d
SHA-256:
0e18f400cc2c91b58997f61949a728aab2090bc34917c24aed4d0aa221edfb0b
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
AHCI or ATA mode must be enabled in BIOS for successful download. The DSRD application automatically detects either AHCI or ATA mode and progresses accordingly.
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
Windows 8.1, 32-bit
Windows 8.1, 64-bit
TBD
(Preparation)
1. Extract all provided zip files to the Bootable USB Drive (extract to the root directory). This will create a DSRD folder on the USB drive.
2. Set USB as the first priority among the booting priority of your system.
3. Turn system (PC) power off.
(FW download Start)
1. Turn system power on and boot up through the USB.
i) Check boot priority settings in your system BIOS if your system cannot boot with USB drive.
ii) DSRD application will execute only in IDE and AHCI modes of ATA / SATA / AHCI controllers.Please check the BIOS setting and set drive mode configuration to Native IDE / AHCI modes.
2. Execute DSRD.EXE in DSRD folder.
3. A warning message automatically appear. Press any key to continue.
4. The next screen shows the existing drive information. Do not press any key since the screen will be automatically passed.
5. Follow the instruction on the next few screens to complete the firmware installation.
6. WARNING: DO NOT PRESS KEY such as ESC, Power Button etc. unless you see the message "Firmware has been successfully updated!".
7. A message "Firmware has been successfully upgraded!" shall appear.
8. DSRD will be terminated.
1. Extract all provided zip files to the Bootable USB Drive (extract to the root directory). This will create a DSRD folder on the USB drive.
2. Set USB as the first priority among the booting priority of your system.
3. Turn system (PC) power off.
(FW download Start)
1. Turn system power on and boot up through the USB.
i) Check boot priority settings in your system BIOS if your system cannot boot with USB drive.
ii) DSRD application will execute only in IDE and AHCI modes of ATA / SATA / AHCI controllers.Please check the BIOS setting and set drive mode configuration to Native IDE / AHCI modes.
2. Execute DSRD.EXE in DSRD folder.
3. A warning message automatically appear. Press any key to continue.
4. The next screen shows the existing drive information. Do not press any key since the screen will be automatically passed.
5. Follow the instruction on the next few screens to complete the firmware installation.
6. WARNING: DO NOT PRESS KEY such as ESC, Power Button etc. unless you see the message "Firmware has been successfully updated!".
7. A message "Firmware has been successfully upgraded!" shall appear.
8. DSRD will be terminated.