請勿在更新 BIOS 時將電腦關機或拔除電源，電腦可能因此受損。更新期間，電腦將重新啟動，並且會暫時顯示黑色畫面。
更新前，請閱讀以下所述的安裝說明與重要資訊。
Dell EMC Server PowerEdge BIOS C4140 Version 1.1.6
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This release contains new Intel Xeon Processor Scalable Family Processor Microcode to address CVE-2017-5715. CVE-2017-5753 and CVE-2017-5754 do not require a microcode update. This release fixes Intel Management Engine issue that causes first BIOS flash update attempt to fail after 24 days of server up-time. This release contains BIOS firmware version 1.1.6 for Dell EMC Server PowerEdge C4140.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes
-BIOS takes a long time to handle correctable memory errors.
-For certain PCIe slots, manual slot bifurcation may not work.
-PCIe fatal error may be reported when a particular Network Daughter Card (NDC) is installed.
-Rarely, the system may stop at POST (Power-On-Self-Test) when running reboot test in the BIOS boot mode.
-Several NVMe-related defects.
-Corrected an issue where, with a large number of network partitions enabled, the network interface names are displayed incorrectly.
-Resolved an Intel Management Engine related issue that caused the BIOS version update to fail (fails only when the server was turned on continuously for 24 days since the previous AC power cycle). See the Important notes section in this Release Notes.
Enhancements
-Updated the Intel Trusted Execution Technology (Intel TXT) BIOS Authenticated Code Module (ACM) to version 1.3.4.
-Updated the Intel Processor and Memory Reference Code to PLR3.1.
-To address CVE-2017-5715 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5715):
-Updated the Intel Xeon Processor Scalable Family Processor Microcode to version 0x43.
-CVE-2017-5753 and CVE-2017-5754 are addressed by Operating System & Hypervisor updates.
-For more information, visit http://www.dell.com/support/article/SLN308588.
閱讀更多-BIOS takes a long time to handle correctable memory errors.
-For certain PCIe slots, manual slot bifurcation may not work.
-PCIe fatal error may be reported when a particular Network Daughter Card (NDC) is installed.
-Rarely, the system may stop at POST (Power-On-Self-Test) when running reboot test in the BIOS boot mode.
-Several NVMe-related defects.
-Corrected an issue where, with a large number of network partitions enabled, the network interface names are displayed incorrectly.
-Resolved an Intel Management Engine related issue that caused the BIOS version update to fail (fails only when the server was turned on continuously for 24 days since the previous AC power cycle). See the Important notes section in this Release Notes.
Enhancements
-Updated the Intel Trusted Execution Technology (Intel TXT) BIOS Authenticated Code Module (ACM) to version 1.3.4.
-Updated the Intel Processor and Memory Reference Code to PLR3.1.
-To address CVE-2017-5715 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5715):
-Updated the Intel Xeon Processor Scalable Family Processor Microcode to version 0x43.
-CVE-2017-5753 and CVE-2017-5754 are addressed by Operating System & Hypervisor updates.
-For more information, visit http://www.dell.com/support/article/SLN308588.
繁體中文版
1.1.6, 1.1.6
發佈日期
18 2月 2018
下載類型
系統 BIOS
類別
BIOS
重要性
緊急Dell Technologies 強烈建議儘快套用此重要更新。此更新包含的重大錯誤修正和變更，可改善 Dell 系統功能、可靠性及穩定性。其也可能包含安全性修正和其他增強功能。
可用的格式 檢視重要資訊
檔案格式： 適用於 MS Windows (64 位元) 的更新套件。
檔案名稱： C4140_BIOS_053KH_WN64_1.1.6.EXE
檔案大小： 26.28 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
如果 Dell 更新套件為原生 Microsoft Windows 64 位元格式，則不需要在 Microsoft Windows Server 安裝 Microsoft WOW64。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
79571e50b771c9da8a9adf4abdf32697
SHA1：
8d6adc679dd594b8fb453d60ffbfc3f2a7b3c524
SHA-256：
b0c029ee3fbe4a9a9eb7df790ef6dc60999de8640a87d7307663ecbf4cb29bd8
檔案格式： 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱： C4140_BIOS_053KH_LN_1.1.6.BIN.sign
檔案大小： 226 Bytes
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章，在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
e3674c651827865d0f50c0b012b8a807
SHA1：
31099cf2013d144c26ca989399f000d664396eb5
SHA-256：
e80d6e823b5bb3d6fef8898fc5e496f863d760dd6537d855eaf2ef201842135f
檔案格式： 適用於 64 位元機器的自動解壓縮檔案
檔案名稱： BIOS_053KH_EFI_1.1.6.efi
檔案大小： 17.94 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含可從 EFI Shell 或 EFI Boot Manager執行的壓縮內容。將檔案下載到抽取式媒體裝置的 EFI 分割區。插入抽取式媒體，然後將系統重新開機，並透過 EFI Shell 或 EFI Boot Manager 執行程式。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
5e2d1e507ca02faf4a80195f178422e0
SHA1：
34f290ac80c48966fe64b229b192739e67e306ec
SHA-256：
1bcc32bc2fbabc79247cc3942b237adc82286620f0ea4c2c57f9122e3c15b18b
檔案格式： 封存的 PDF 檔案提供客戶說明及程序資訊
檔案名稱： C4140_BIOS.1.1.6_RN.pdf
檔案大小： 219.64 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此格式包含 PDF 檔案的封存，可用來向客戶提供說明及程序性資訊。請務必先安裝 Adobe Acrobat Reader 以檢視此封存中的檔案。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
f56c6c39373403b9326454f2d4576918
SHA1：
1eeb4685fc929647e269e5d2bbba0551a1f9795e
SHA-256：
4e9a4c9f99372459a9c77eb6d80b4f407aea9cc93cf1458db12ddbb5f08c8f79
檔案格式： 適用於 Red Hat Linux 的更新套件
檔案名稱： C4140_BIOS_053KH_LN_1.1.6.BIN
檔案大小： 26.63 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式，確保符合特定的驗證條件，然後套用更新。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
2a99d25bdc960422688f39727eb0548b
SHA1：
5c39c09bc6fec99044e726a6d19e98229328b1aa
SHA-256：
9cc3915603c586e04cf4b3a40b7cbcf1afce3696443e68b7179a300fb8e03e43
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
An Intel Management Engine related issue that caused the BIOS update to fail is resolved in this BIOS 1.1.6 version.
- To work around this issue, AC power cycle the system or run the iDRAC RACADM power cycle command before updating the BIOS.
Warning: Running an iDRAC RACADM power cycle command while running an operating system causes an ungraceful shutdown.
- This included remedy becomes effective only after the device is updated with this BIOS 1.1.6 version.
- The first attempt to upgrade to this 1.1.6 version will fail, but the second attempt will pass if done within 24 days after the first attempt.
- For more information about this issue and safely working around this issue, see:
- PSQN SLN 309027 here:
http://www.dell.com/support/article/us/en/04/SLN309027.
- Intel HSD125807 here:
https://www.intel.com/content/dam/www/program/design/us/en/documents/hsd125807-hmrfpo-timeout-ta-337128.pdf?asset=16254.
- To work around this issue, AC power cycle the system or run the iDRAC RACADM power cycle command before updating the BIOS.
Warning: Running an iDRAC RACADM power cycle command while running an operating system causes an ungraceful shutdown.
- This included remedy becomes effective only after the device is updated with this BIOS 1.1.6 version.
- The first attempt to upgrade to this 1.1.6 version will fail, but the second attempt will pass if done within 24 days after the first attempt.
- For more information about this issue and safely working around this issue, see:
- PSQN SLN 309027 here:
http://www.dell.com/support/article/us/en/04/SLN309027.
- Intel HSD125807 here:
https://www.intel.com/content/dam/www/program/design/us/en/documents/hsd125807-hmrfpo-timeout-ta-337128.pdf?asset=16254.
適用於
PowerEdge C4140 BIOS
SWB,BIOS,14G,C4140,Q1OOBFY19
安裝指示
Dell Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
---------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2.Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
---------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2.Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign