請勿在更新 BIOS 時將電腦關機或拔除電源,電腦可能因此受損。更新期間,電腦將重新啟動,並且會暫時顯示黑色畫面。
更新前,請閱讀以下所述的安裝說明與重要資訊。
Dell OptiPlex System BIOS, A09
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Optiplex GX110 A09 FlashBIOS
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
The following changes have been made to A08 BIOS to create A09:
1. Fix LPT code for HP All-in-one printers
閱讀更多1. Fix LPT code for HP All-in-one printers
繁體中文版
A09, A09
發佈日期
24 1月 2003
下載類型
系統 BIOS
類別
BIOS
重要性
選用Dell Technologies 建議您檢閱此更新,以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態,或其提供的新功能不一定適用於您的環境。
檔案格式: 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱: BR55317.exe
檔案大小: 185.2 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
不適用
SHA1:
不適用
SHA-256:
不適用
檔案格式: 快閃 BIOS 執行檔
檔案名稱: GX110A09.EXE
檔案大小: 271.92 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案格式包含 BIOS 可執行檔。若要更新您的系統,請下載該檔案並將其儲存至您的桌面或硬碟,然後執行可執行檔。若要更新 BIOS,您的系統必須接上交流電源,而且電池電量至少需達 10% 以上。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
不適用
SHA1:
不適用
SHA-256:
不適用
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
BIOS
OPTIPLEX 330 SYSTEM BIOS
OptiPlex System BIOS
Important Information
- The Floppy Format is recommended for most users. Floppy format creates a bootable self-extracting disk.
- The Non-packaged Format is intended for advanced users that only require the bootable disk.
Installation Instructions
Floppy Format
Creating the disk:
This procedure requires one blank, formatted 3.5-inch floppy disk. Label the disk BIOS.
- Click Download now from the Download and install section, to begin.
The File Download window appears. - Click Save this program to disk.
- In the Save in: section, click the down arrow and click to select Desktop as the location then click Save.
- When the file download is complete, click Close button.
Close all open windows. - Double-click the down loaded file GX110A09.EXE on your Desktop.
If the Security Warning window appears, click Yes. - Click the Setup button.
A black MS-DOS window appears. - Press the <Enter> key.
- Insert a formatted floppy disk in the floppy disk drive and press the <Enter> key.
- Press the <Y> key to begin copying files.
The message End of the disk set appears. - Press the <Enter> key.
- Click the Start button,
- Click the Run button.
- Type a: in
the Open box and click OK.
A list of files on the floppy disk appears. - Close all open windows and leave the disk in the floppy drive.
Skip to the section Flashing the BIOS below.
If you are creating this disk on another computer, remove the disk. Then insert it into the system that needs the BIOS flashed, and resume the procedure.
Return to Top
Non-Packaged Format
Creating the disk:
This procedure requires one blank, formatted 3.5-inch floppy disk. Label the disk BIOS.
- Click Download now from the Download and install section, to begin.
The File Download window appears. - Click Save this program to disk.
- In the Save in: section, click the down arrow and click to select Desktop as the location then click Save.
- When the file download is complete, click Close button.
Close all open windows. - Insert a blank, bootable, formatted 3.5-inch floppy disk.
- Right-click the downloaded file, point to Send Tothen click to select 3 1/2 Floppy (a), and skip to the section Flashing the BIOS
below.
Return to Top
Flashing the BIOS
NOTICE:
Changing the system BIOS may result in unintended side affects, such as
incompatibility of the new BIOS with installed hardware. If problems arise
after a BIOS change, it may be necessary to return the system to the
original version of the BIOS.
- If you are flashing the BIOS on a portable computer, be sure that
the AC adapter is plugged in and the computer is not operating on battery
power. - Ensure that the Flash BIOS disk is inserted into the floppy disk
drive. - Click the Start button, click Shut Down, click
Restart, then click OK.
The computer will restart
and boot to the floppy disk.
NOTE:
If the flash BIOS