Chelsio S310 Single-Port 10G, PCI/PCIE x8, v.1.5.13.24 , A00
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Chelsio S310 single port 10G, PCI, PCIe x8 / Chelsio S320 dual port 10G, PCI, PCIe x8 Driver for Win2K8
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Initial Release
閱讀更多繁體中文版
1.5.13.24, A00
發佈日期
19 1月 2012
下載類型
驅動程式
類別
有線網路/無線網路/藍牙
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容,並且可能包含其他新功能。
檔案格式: ZipPack 外接
檔案名稱: R275379chelsio-1.5.13.24.exe
檔案大小: 7.13 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
7421d5a42b71ebe5ede9441bf44808a5
SHA1:
5e87a4512df3b288b88be0b780ca9ad2a1e3d284
SHA-256:
不適用
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
S310 Single-Port 10G, PCI/PCIE x8
Custom Instructions for R275379chelsio-1.5.13.24.zip:
Build and Install
================================================================================
The driver must be installed by the root user, any attempt in installing the
driver as a regular user will fail to install.
If building the driver for a kernel other than the current running kernel, it
will be necessary to pass in KSRC= to make. Furthermore, if your
build tree is in a different location than the source tree, you will need to
pass in KOBJ= to make as well.
The src directory contains the driver source files for building kernel modules.
To build the TOE driver, change to the src/ directory and run:
make
make install
To build the NIC driver (without offload support),
change to the src/ directory and run:
make nic
make nic install
Only one type of driver needs to be compiled, NIC or TOE, not both. The TOE
driver is built by default, without passing any arguments to make. Building
the TOE driver also provides NIC only support if the 't3_tom' driver is not
loaded. Once the t3_tom module is loaded, all new TCP connections will be
offloaded. If there are any TCP listening servers started before t3_tom has
been loaded, it will be necessary to restart those servers for TCP to be
offloaded.
Build and Install
================================================================================
The driver must be installed by the root user, any attempt in installing the
driver as a regular user will fail to install.
If building the driver for a kernel other than the current running kernel, it
will be necessary to pass in KSRC= to make. Furthermore, if your
build tree is in a different location than the source tree, you will need to
pass in KOBJ= to make as well.
The src directory contains the driver source files for building kernel modules.
To build the TOE driver, change to the src/ directory and run:
make
make install
To build the NIC driver (without offload support),
change to the src/ directory and run:
make nic
make nic install
Only one type of driver needs to be compiled, NIC or TOE, not both. The TOE
driver is built by default, without passing any arguments to make. Building
the TOE driver also provides NIC only support if the 't3_tom' driver is not
loaded. Once the t3_tom module is loaded, all new TCP connections will be
offloaded. If there are any TCP listening servers started before t3_tom has
been loaded, it will be necessary to restart those servers for TCP to be
offloaded.