Intel Optane Memory H10 with Solid State Storage Firmware Update

Restart required

hi testing

Driver Id : 95K3W

Importance : Critical

Version : 7003-7051, A00 Latest version Recommended version Latest and Recommended version

Release Date : 17 Jan 2020

Download Type : Firmware

Category : Storage

This package contains the firmware for Intel Optane Memory H10 with Solid State Storage, Revision 7002.7050. Storage firmware is a microcode that is embedded on storage devices such as hard drives or solid-state drives. The firmware manages the functionality of the devices. This update fixes the issue where the system does not detect solid-state drive (SSD) after reboot.

Download Files

File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.

File Name: Intel Optane Memory H10 with Solid State Storage 95K3W_ZPE.exe

File size: 3.97 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: 327caaac0eaa0454716c2f858610e42a

SHA1: da27b5601220079c680bef26f74c630e2ed70fb5

SHA-256: 67cd57449ae0726989c7832bc8daefd1a4455e30c456b7f8a105e99c083da9cf

Download .EXE

Fixes & Enhancements

Fixes:
- Fixed the issue where the solid-state drive (SSD) stops responding.
- Fixed the issue where the drive displays an error of Inaccessible Boot Device due to different power state timings.
- Fixed the issue where no drive attached error message is displayed in low power mode.
- Fixed the issue where the SSD fails to increase the Unsafe Shutdown Count of the system, which causes an error.

Enhancements:
- Enhanced the capabilities of reporting debug.

Installation instructions

Note:
It is recommended to back up the data in the system and close all open applications. It is also recommended to connect the power cable if it is not a desktop and disconnect all external storage devices.

Firmware upgrade through the Windows utility

Download
1. Click Download File to download the file.
2. When download is complete, run the downloaded file to unzip to your drive.
3. The file explorer opens pointing to the directory containing the download package. Take note of the path.

Upgrade Procedure
1. Close all open applications and save your work before the firmware update process.
2. Go to the location where you have downloaded the package.
3. Run irmfuu_7.1.9_win64 as administrator.
A command prompt interface is displayed. Wait for the update to take place.
4. After the command prompt window closes, reboot your computer to complete the installation.

Intel Optane Memory H10 with Solid State Storage Firmware Update

Download Files

Fixes & Enhancements

Important Information

Compatible Systems

Supported Operating Systems

Installation instructions

Applies to