Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell G15 5515 System BIOS
Restart requiredOTOMATİK OLARAK YÜKLENDİBu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Bu sayfa içeriği otomatik olarak çevrilmiş olabilir. Geri bildirim sağlamak için sayfanın en altındaki formu doldurun.
Bu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices.
Dell G15 5515 Ryzen Edition ürününüze yönelik tüm sürücüleri görüntülemek için şu bölüme gidin:Sürücüler ve indirmeler.
Önerilen
Sürücünün mevcut en son sürümü yükleniyor...
Bu, sürücünün Dell onaylı en son sürümüdür
Bu, sürücünün Dell onaylı en son sürümü değildir
Dell_G15_5515_1.0.6.exe | 20.42 MB>
Bu indirmenin aygıtınızla uyumluluğunu kontrol etmek için bilgisayarınızın Servis Etiketini girin.
Dosya Biçimi:Windows/DOS için CPG BIOS Yürütülebilir Dosyası
Dosya Adı:Dell_G15_5515_1.0.6.exe
Dosya Boyutu:20.42 MB
Biçim Açıklaması
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
İndirme işleminizin bütünlüğünü sağlamak için lütfen sağlama toplamı değerini doğrulayın.
Otomatik taramayı kullanmak için Windows'da yönetici olarak oturum açın. Zaten yönetici olarak oturum açtıysanız ve bu mesajı görüyorsanız lütfen yeniden başlatın.Sisteminiz BT yöneticiniz tarafından yönetiliyor ve özellikler sınırlı olabilir.
Daha fazla güncelleme bulun. SupportAssist'i kullanarak aygıtınız için en son sürücü güncellemelerini bulun.
Fixes & Enhancements
- Fixed the issue where the BIOS update happens twice during the BIOS recovery process. This issue occurs when the BIOS Auto-Recovery feature is disabled in the BIOS menu and the option recovery BIOS is selected to update the BIOS. - Fixed the issue where the Caps Lock key light does not turn off when the system is in Modern Standby mode with an audio device connected.
Dell Technologies, bir sonraki zamanlanmış güncelleme döngünüzde bu güncellemeyi uygulamanızı önerir. Bu güncelleme, genel sistem durumunu korumaya yönelik değişiklikler içerir. Sistem yazılımının güncel ve diğer sistem modülleriyle (bellenim, BIOS, sürücüler ve yazılım) uyumlu kalmasını sağlar ve başka yeni özellikleri içerebilir.
Bu büyük bir dosyadır. Bağlantı hızınıza bağlı olarak indirme işlemi biraz zaman alabilir.
Biçim Açıklaması:
This file format consists of a BIOS Recovery image file. This file is used for the System BIOS Recovery process to recover a system from a corrupted BIOS.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation 1. Click Download File. 2. Click Save to save the file to your hard drive. 3. Browse to the location where you downloaded the file. 4. Double-click the new file. 5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com Note 2: Do not turn off power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation Note: You must provide a bootable USB drive. This executable file does not create the DOS system files. 1. Copy the downloaded file to a bootable USB drive. 2. Power on the system and then Press the F12 key. 3. Select USB Storage Device and boot to the DOS prompt. 4. Run the file by typing following command. For example: C:\ Alienware_Area_51M_R2.exe Where C is the drive letter of the USB device where the executable file is located and Alienware_Area_51M_R2.exe is the name of the downloaded file. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com Note 2: Do not turn off the power or interrupt the BIOS update process during the update. Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation 1. Copy the downloaded file to a bootable DOS USB drive. 2. Power on the system and then go to BIOS Setup by pressing the F2 key. 3. Go to General > Boot Sequence > Boot > Boot List Option. 4. Change UEFI to Legacy of Boot List Option. 5. Go to Exit > Save Changes and reboot system. 6. Press F12 and then select USB Storage Device and boot to the DOS prompt. 7. Run the file by typing the file name. 8. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again. 9. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option. 10. Change Legacy to UEFI Boot Option. 11. Go to Exit > Save Changes and reboot the system.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.