Restart requiredOTOMATİK OLARAK YÜKLENDİBu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Bu sayfa içeriği otomatik olarak çevrilmiş olabilir. Geri bildirim sağlamak için sayfanın en altındaki formu doldurun.
Bu dosya son güncellemenin bir parçası olarak otomatik olarak yüklendi. Herhangi bir sorun yaşıyorsanız, manuel olarak indirip yeniden yükleyebilirsiniz.
Chassis Management Controller Firmware Version 2.20
Önerilen
Uyumluluğu kontrol edin
Sisteminize yönelik en son sürücü bilgilerini görüntülemek için lütfen ürün ayrıntılarınızı girin
Sonuç bulunamadı.Aramanız için sonuç bulamadık. Lütfen bir servis etiketi (B959FS3) veya model (Latitude 5540) girerek aramanızı değiştirin ve tekrar deneyin.
Bu sürücü uyumlu değil
Bu sürücü, seçilen ürün için geçerli değildir. Ürün ayrıntılarınızı yeniden girmek için başka bir ürün seçin veya farklı bir ürüne yönelik tüm sürücüleri görüntülemek için Ürün Desteği sayfasını ziyaret edin.
Otomatik taramayı kullanmak için Windows'da yönetici olarak oturum açın. Zaten yönetici olarak oturum açtıysanız ve bu mesajı görüyorsanız lütfen yeniden başlatın.Sisteminiz BT yöneticiniz tarafından yönetiliyor ve özellikler sınırlı olabilir.
Daha fazla güncelleme bulun. SupportAssist'i kullanarak aygıtınız için en son sürücü güncellemelerini bulun.
Fixes & Enhancements
Fixes and Enhancements in Version 2.20 ---------------------------------------- - QLogic FCoE mezzanine card: The QLogic supports 4 MAC and 2 WWN addresses, consisting of a total of 6 addresses to be displayed in the GUI pages and by the RACADM getmacaddress -a and getflexaddr commands. - New SD card format: The new SD card format contains two features to allow additional MAC addresses to be allocated for each server. The RACADM feature and featurecard commands display the features contained in the card. CMC 2.20 supports both the current SD card format and the new SD card format. - Launching vKVM from CMC: This feature allows direct launch of a KVM session on the server. - This feature is only supported when all of the following conditions are TRUE: 1) Server is PowerEdge M610 or PowerEdge M710. 2) The chassis power is on. 3) The LAN interface on the server's iDRAC is enabled. 4) The iDRAC version is version 2.20 or later. 5) The host system needs to have JRE (Java Runtime Environment) 6 Update 16 or later installed. 6) The host system needs to allow pop-up windows (i.e., disable pop-up blocking).
Dell Technologies, bir sonraki zamanlanmış güncelleme döngünüzde bu güncellemeyi uygulamanızı önerir. Bu güncelleme, genel sistem durumunu korumaya yönelik değişiklikler içerir. Sistem yazılımının güncel ve diğer sistem modülleriyle (bellenim, BIOS, sürücüler ve yazılım) uyumlu kalmasını sağlar ve başka yeni özellikleri içerebilir.
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package. 2. Specify the location to unzip the files. 3. Click on the unzip button to extract files. 4. Use the CMC user interface or CLI (RACADM) tool to perform the CMC firmware update.
Custom Instructions for CMC220_README.TXT:
1) Click Download now. The File Download window appears.
2) Click the Save button. The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button. A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file. The Dell CMC Release Notes window appears.