Stäng inte av datorn eller koppla från strömkällan medan BIOS uppdateras. Annars kan datorn skadas. Under uppdateringen kommer datorn att startas om och en svart skärm kan visas en kort stund.
Läs installationsanvisningarna och den viktiga informationen nedan innan du uppdaterar.
Dell EMC Server BIOS for DSS 9600/9620/9630 & DCS 9650/9660R/9670/9690 Version 1.3.7
Omstart krävs AUTOMATISKT INSTALLERAD Den här filen installerades automatiskt som en del av en ny uppdatering. Om du har problem kan du ladda ner och installera om den manuellt.Innehållet på den här sidan kan ha översatts automatiskt. Fyll i formuläret längst ned på sidan för att ge feedback.
This release contains new Intel Xeon Processor Scalable Family Processor Microcode to address CVE-2017-5715. CVE-2017-5753 and CVE-2017-5754 do not require a microcode update. This release contains BIOS firmware version 1.3.7 for Dell EMC Server PowerEdge DSS9600/9620/9630 & DCS9650/9660R/9670/9690.
Rekommenderat
Hitta den bästa nerladdningen för ditt system
Ange din produktinformation för att se den senaste informationen om drivrutiner för ditt systemSök efter support
Ange din Dell service tag eller modell
Vill du söka efter din produkt? Ange en produktidentifierare. Visa mig hur
Den här drivrutinen är inte kompatibel
Den här drivrutinen gäller inte för den valda produkten. Välj en annan produkt för att ange din produktinformation för den här drivrutinen igen eller gå till produktsupportsidan för att visa alla drivrutiner för en annan produkt.
Logga in på Windows som administratör för att använda automatisk skanning. Om du redan är inloggad som administratör och ser det här meddelandet ska du starta om. Ditt system hanteras av IT-administratören och funktionerna kan vara begränsade.
Hitta fler uppdateringar. Använd SupportAssist för att hitta alla de senaste drivrutinsuppdateringarna för din enhet.
Korrigeringar och förbättringar
Fixes:
* Rarely, the system may stop at POST (Power-On-Self-Test) when running reboot test in the BIOS boot mode.
* Several NVMe-related defects are resolved.
* It takes too long in the memory correctable Error-Correcting Code (ECC) logging System Management Interrupt (SMI), which impacts the Omni-Path Architecture Host Fabric Interface (OPA HFI) network performance. Fixed it by removing the redundant data logged to Serial Presence Detection (SPD) to reduce the SMI time from hundreds to several milliseconds.
* Resolved an Intel Management Engine related issue that caused the BIOS version update to fail (fails only when the server was turned on continuously for 24 days since the previous AC power cycle).
- To work around this issue, AC power cycle the system or run the iDRAC RACADM power cycle command before updating the BIOS.
Warning: Running an iDRAC RACADM power cycle command while running an operating system causes an ungraceful shutdown.
- However, this remedy becomes effective only if the device is updated with this BIOS 1.3.7 version.
- The first attempt to upgrade to this 1.3.7 version will fail, but the second attempt will pass if done within 24 hours after the first attempt.
- For more information about the safe power-cycle procedures, see PSQN SLN 309027 here:
http://www.dell.com/support/article/us/en/04/SLN309027
Enhancements:
* Updated the Intel Trusted Execution Technology (Intel TXT) BIOS Authenticated Code Module (ACM) to version 1.3.4.
* Updated the Intel Processor and Memory Reference Code to PLR3.1.
* To address CVE-2017-5715 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5715).
- Updated the Intel Xeon Processor Scalable Family Processor Microcode to version 0x43.
- CVE-2017-5753 and CVE-2017-5754 are addressed by Operating System & Hypervisor updates.
- For more information, visit http://www.dell.com/support/article/SLN308588
Läs mer* Rarely, the system may stop at POST (Power-On-Self-Test) when running reboot test in the BIOS boot mode.
* Several NVMe-related defects are resolved.
* It takes too long in the memory correctable Error-Correcting Code (ECC) logging System Management Interrupt (SMI), which impacts the Omni-Path Architecture Host Fabric Interface (OPA HFI) network performance. Fixed it by removing the redundant data logged to Serial Presence Detection (SPD) to reduce the SMI time from hundreds to several milliseconds.
* Resolved an Intel Management Engine related issue that caused the BIOS version update to fail (fails only when the server was turned on continuously for 24 days since the previous AC power cycle).
- To work around this issue, AC power cycle the system or run the iDRAC RACADM power cycle command before updating the BIOS.
Warning: Running an iDRAC RACADM power cycle command while running an operating system causes an ungraceful shutdown.
- However, this remedy becomes effective only if the device is updated with this BIOS 1.3.7 version.
- The first attempt to upgrade to this 1.3.7 version will fail, but the second attempt will pass if done within 24 hours after the first attempt.
- For more information about the safe power-cycle procedures, see PSQN SLN 309027 here:
http://www.dell.com/support/article/us/en/04/SLN309027
Enhancements:
* Updated the Intel Trusted Execution Technology (Intel TXT) BIOS Authenticated Code Module (ACM) to version 1.3.4.
* Updated the Intel Processor and Memory Reference Code to PLR3.1.
* To address CVE-2017-5715 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5715).
- Updated the Intel Xeon Processor Scalable Family Processor Microcode to version 0x43.
- CVE-2017-5753 and CVE-2017-5754 are addressed by Operating System & Hypervisor updates.
- For more information, visit http://www.dell.com/support/article/SLN308588
Version
1.3.7, 1.3.7
Utgivningsdatum
18 feb. 2018
Hämtningstyp
System-BIOS
Kategori
BIOS
Prioritet
BrådskandeDell Technologies rekommenderar starkt att du installerar den här viktiga uppdateringen så snart som möjligt. Uppdateringen innehåller kritiska buggfixar och ändringar som förbättrar funktionaliteten, pålitligheten och stabiliteten i ditt Dell-system. Den kan även innehålla säkerhetskorrigeringar och andra funktionsförbättringar.
Tillgängliga format Visa viktig information
Filformat: Uppdateringspaket för Microsoft Windows (64-bitars).
Filnamn: BIOS_2MK59_WN64_1.3.7.EXE
Filstorlek: 26.38 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Dell Uppdateringspaket i inbyggt Microsoft Windows 64-bitarsformat kräver inte att Microsoft WOW64 är installerat på Microsoft Windows-servern.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
1684c1331a5c2d77b98f5f5ca13357f6
SHA1:
8efda2ffeca49a3220ebfb041121a6687e884359
SHA-256:
13ae28e2fea6db537bf3be6711f16dd838ec71ac0af9f0b07f96e207aa0cd41c
Filformat: En GnuPG-fil som innehåller en kryptografisk signatur
Filnamn: BIOS_2MK59_LN_1.3.7.BIN.sign
Filstorlek: 226 Bytes
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
GnuPG-signaturen för Red Hat Linux-uppdateringspaket kan användas för att autentisera Dells identitet i det korrelerade Red Hat Linux-uppdateringspaketet.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
73c851110e806f5c66f4b51e22133fea
SHA1:
fd684e4e9f51f73e7e26653f6487a92f3759115c
SHA-256:
aee9639c06bb54cb3d8f88c2b9ae89d2a43f16b2d8f8501771c6799bbdf2ed99
Filformat: Uppdateringspaket för Red Hat Linux
Filnamn: BIOS_2MK59_LN_1.3.7.BIN
Filstorlek: 26.74 MB
Det här är en stor fil. Beroende på din anslutningshastighet kan det ta lite tid att ladda ner den.
Formatbeskrivning:
Dell Uppdateringspaket för Linux kan användas som en fristående applikation som säkerställer att specifika valideringskriterier uppfylls och sedan utför en uppdatering.
Obs! Uppdateringspaketen för Linux är öppen källkod. Mer information finns i Viktigt-filen Dell Uppdateringspaket för Linux.
Obs! Uppdateringspaketen för Linux är öppen källkod. Mer information finns i Viktigt-filen Dell Uppdateringspaket för Linux.
Verifiera kontrollsummans värde så att hämtningen genomförs korrekt.
MD5:
dc8f53821d7980461d470f8855d82416
SHA1:
59e844d3fa37db74af11126746a1578aaa98cc41
SHA-256:
54b3de3f84caecd4c96a062008735551d7ae66b3af9f986908ae1066e0b152c6
I och med att du hämtar accepterar du villkoren i Dells licensavtal för programvara. (på Engelska)
Viktig information
An Intel Management Engine related issue that caused the BIOS update to fail is resolved in this BIOS 1.3.7 version. See the Fixes section in this Release Notes.
Operativsystem som stöds
Ej tillämpligt
Gäller
PowerEdge BIOS
SWB,GHOST,BIOS,Q1FY19
Installationsanvisningar
Dell Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
---------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2.Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
--------------------------------------------------------------------------------
Dell Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
---------------------------------------------
GnuPG Signature of Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do once on your system.)
2.Verify the Dell Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Behöver du hjälp med BIOS-problem?
Hitta en lösning i Dells manual för användning och felsökning av BIOS.Hjälp och självstudiekurser för drivrutiner
Fler hämtningar finns på Drivrutiner och hämtningsbara filer. Mer information om hur du använder sidan finns i Hjälp och anvisningar för drivrutiner