Este necesară repornireaINSTALATE AUTOMATAcest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.
Conținutul acestei pagini este posibil să fi fost tradus automat. Pentru a furniza feedback, completați formularul din partea de jos a paginii.
Acest fișier a fost instalat automat ca parte a unei actualizări recente. Dacă întâmpinați orice probleme, puteți descărca și reinstala manual.
This package provides the firmware for the 6Gbps SAS HBA Firmware Release 07.03.05.00
Recomandate
Verificați compatibilitatea
Introduceți detaliile produsului pentru a vedea cele mai recente informații despre driverele sistemului dvs.
Introduceți eticheta de service Dell sau modelul
Doriți să vă căutați produsul? Introduceți un identificator de produs.Arătați-mi cum
Nu s-a găsit niciun rezultat.Nu am găsit nimic pentru căutarea dvs. Modificați căutarea pentru a introduce o etichetă de service (B959FS3) sau un model (Latitude 5540) și încercați din nou.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Conectați-vă la Windows ca administrator pentru a utiliza scanarea automată. Dacă sunteți deja conectat ca administrator și vedeți acest mesaj, reporniți sistemul.Sistemul dvs. este gestionat de către administratorul IT, iar caracteristicile pot fi limitate.
Găsiți mai multe actualizări. Utilizați SupportAssist pentru a găsi cele mai recente actualizări ale driverelor pentru dispozitivul dvs.
Fixes & Enhancements
Fixes: - UEFI driver fixes for passthru mode and installation stability - UEFI driver didn't recognize tape devices - diagnostics fail scsi buffer test when run - controller did not always release allocated memory
Dell Technologies recomandă aplicarea acestei actualizări în următorul ciclu de actualizare programat. Actualizarea conține modificări pentru menținerea stării generale de funcționare a sistemului. Acesta asigură faptul că software-ul sistemului rămâne actual și compatibil cu alte module de sistem (firmware, BIOS, drivere și software) și poate include alte caracteristici noi.
Format fișierActualizați pachetul pentru MS Windows pe 32 de biți
Nume fișier:SAS-Non-RAID_Firmware_8VGC6_WN32_07.03.05.00_A09.EXE
Dimensiune fișier:5.87 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
a55f32c72b64481aa7ef3dedbc180855
SHA1:
a631c189b11d1a232bef10154ee99167c2b4ac3b
SHA-256:
Not available
Format fișierZipPack External
Nume fișier:SASHBA_6GBPS-SAS-HBA_07.03.05.00_A09_ZPE.exe
Dimensiune fișier:857.19 KB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Pentru a asigura integritatea descărcării, verificați valoarea cifrei de control.
MD5:
65ddeeb492c8351ac219db52c4e6a9e9
SHA1:
78e9e34ac6f0401d94a6ce4bf5b106eae908e8fa
SHA-256:
Not available
Format fișierUpdate Package for Red Hat Linux
Nume fișier:SAS-Non-RAID_Firmware_8VGC6_LN32_07.03.05.00_A09.BIN
Dimensiune fișier:3.96 MB
Acesta este un fișier mare. În funcție de viteza conexiunii, descărcarea poate dura mai mult timp.
Descriere format:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update. Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
When installing an OS, be sure to select a Boot Device in CTRL+C. In CTRL+C, under SAS Topology, scroll down to the desired Physical Disk or Virtual Disk and enter ALT+B to select the device as your Boot Device.
- Resynch, Background Init and Consistency Check processes will always occur serially.
- When viewing SATA physical disk properties from Ctrl-C or other management applications, Vendor Identification must be translated as "ATA" followed by blanks. Please see SATA translation specification, revision 5, pages 24-25 for more details.
- When adding a Dell 6Gbps SAS controller to a system, the new controller may need to be added to the controller boot order in the PERC H200 BIOS / 6Gbps SAS configuration Utility.
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP). 2. Reboot for the new FW take effect 3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares. 4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost) 5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click on the OK button to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click the OK button to exit from the installer.
Installation 1. Copy extracted files to bootable media. 2. Reboot system to bootable media. 3. Execute update.bat to perform flash. 5. After flash is complete, remove bootable media. 4. Reboot system for changes to take effect.
Windows Update Package:
Download 1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Read over the release information presented by executing the ./FRMW_LX_RXXXXXX.BIN --version command from the shell. 2. Download and install any prerequisites identified in the above step before proceeding. 3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell. 4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Import the Dell public key. (You only need to do this once on your system.) 2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.