INSTALADO AUTOMATICAMENTEEste ficheiro foi instalado automaticamente como parte de uma atualização recente. Se detetar algum problema, pode transferir e reinstalar manualmente.
O conteúdo desta página pode ter sido traduzido automaticamente. Para fazer comentários, preencha o formulário no fim da página.
Este ficheiro foi instalado automaticamente como parte de uma atualização recente. Se detetar algum problema, pode transferir e reinstalar manualmente.
LS-120 Drive Firmare Utility
Recomendado
Verificar compatibilidade
Digite os dados do seu produto para ver as informações mais recentes sobre o driver do sistema
Digite a etiqueta de serviço ou o modelo da Dell
Quer procurar o seu produto? Digite um identificador do produto.Mostre-me como
Nenhum resultado encontrado. Não foi possível encontrar resultados para a sua pesquisa. Modifique sua pesquisa para inserir uma etiqueta de serviço (B959FS3) ou um modelo (Latitude 5540) e tente novamente.
Este driver não é compatível
Este driver não é válido para o produto selecionado. Selecione outro produto para digitar novamente os dados do seu produto para este driver ou acesse a página Suporte a produtos para ver todos os drivers de um produto diferente.
Faça log-in no Windows como administrador para usar a verificação automática. Se você já estiver conectado como administrador e estiver vendo esta mensagem, reinicialize o sistema.O sistema é gerenciado pelo administrador da TI e pode haver poucos recursos.
Encontre mais atualizações. Use o SupportAssist para encontrar as atualizações de driver mais recentes para o seu dispositivo.
Fixes & Enhancements
This utility updates the firmware on the LS-120 Drive, DP/N 042YKW, used on the Dell PowerEdge 7150 platform. It must be run from the EFI shell.
A Dell Technologies recomenda analisar esta atualização para determinar se ela é válida para seu sistema. A atualização contém alterações que afetam apenas determinadas configurações ou oferece novos recursos que podem ou não ser válidos para seu ambiente.
File Format:One or more self extracting disk images inside of a self extracting zip
File Name:B6T70600.exe
File Size:493.5 KB
Este é um arquivo pesado. Dependendo da velocidade da sua conexão, o download pode demorar um tempo para ser concluído.
Descrição de formato:
Este arquivo contém um conjunto compactado (ou zipado) de arquivos. Faça download do arquivo em uma pasta no disco rígido e, em seguida, dê dois cliques para descompactar o conjunto de arquivos. Siga as instruções para concluir a instalação.
1. Get 1 blank, formatted floppy disks. 2. Click the new icon on the desktop. The Self-Extractor window appears. 3. Click Setup. An MS-DOS window appears with a message indicating that you need 1 floppy diskettes. 4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. Insert a floppy disk into the floppy disk drive. 5. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased. 6. Press the [y] key and then press the [ENTER] key. The files are copied to the floppy diskette. Once the files have been copied to the diskette a message appears prompting you to insert the second diskette. 7. Repeat steps 4 – 6 until you reach the end of the diskette set. 8. After all the files have been copied to the last floppy disk, press the [ENTER] key and the MS-DOS window closes.
The unpack utility is DOS based. Run the executable file on a Windows based machine (not IA64), the following files will be unpacked and copied to a standard 1.44MB formatted floppy.
Place the floppy in the Ls-120 drive and Boot to the EFI Boot Manager Screen Select the EFI Boot option Should see the Device mapping table Look for the FS#'s to identify the Floppy, CDROM, and Hard Drives The LS-120 will have a description of Primary Master or Device 00. The Hard Drive will have a description of Scsi or Device 80. The command "map –r" will remap the devices. If the Device 80 or Scsi is FS1 then type: "FS1:" to change to the hard drive. Type: "dir" to print a directory to the screen. This is the main directory where the files should be copied. Should also see the dellup Directory. Copy the five files to the hard drive, (verify fs0 corresponds to the floppy drive) type: "copy fs0:auto.prm" the response should be fs0:\auto.prm -> fs1:\auto.prm[ok]
Type: "update" the utility will begin the following should appear on the screen.
Beginning Update Process New revision (file): C936M924 Old revision (ROM): C932M923
Note: If the Old revision number does not appear here then this drive cannot be updated !
Continue with the update of the Flash-EEPROM? (y/n) Type: "y"
Loader F/W Revision: 101 Erase Processing Erase OK Write Processing Write OK Flash Load: OK
The flash has completed and you are then returned to the EFI Prompt.