Adaptec CERC SATA1.5/6ch, v.4.1.1.7043, A00
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
CERC SATA 1.5/6ch Device Driver for Windows Server 2008 x86
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Initial Release
자세히 보기버전
4.1.1.7043, A00
출시일
29 2월 2008
다운로드 유형
드라이버
범주
스토리지
중요도
권장Dell Technologies는 다음번 예정된 업데이트 주기에 이 업데이트를 적용할 것을 고객에게 권장합니다. 이 업데이트에는 전체 시스템 상태를 유지 관리하기 위한 변경 사항이 포함되어 있습니다. 이 업데이트는 시스템 소프트웨어가 최신 상태를 유지하고 다른 시스템 모듈(펌웨어, BIOS, 드라이버 및 소프트웨어)과 호환되게 해 주며 다른 새로운 기능을 포함하고 있을 수 있습니다.
파일 형식: MS Windows 32비트용 업데이트 패키지
파일 이름: DRVR_WIN_R180082.EXE
파일 크기: 4.91 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
Microsoft Windows 32비트 형식의 DUP(Dell 업데이트 패키지)는 Microsoft Windows 64비트 운영 체제를 실행하도록 설계되었습니다. Microsoft Windows 64비트 형식의 DUP(Dell 업데이트 패키지)는 Microsoft Windows 64비트 운영 체제에서만 실행됩니다. 장치 드라이버 업데이트를 선택할 때 운영 체제에 적합한 업데이트를 선택하도록 하십시오.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
02152BD5148D04FA55BCE3AFA2186E5C
SHA1:
이용 불가
SHA-256:
이용 불가
파일 형식: ZipPack 외장형
파일 이름: ADAPTEC_CERC-SATA1-5-6CH_A00_R180082.EXE
파일 크기: 165.02 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 실행(두 번 클릭)하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
파일 형식: 외부 릴리스 정보
파일 이름: R180082.txt
파일 크기: 4.04 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 표준 텍스트 편집기를 사용하여 볼 수 있는 일반 텍스트를 포함합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
8e33a58cc1768f11744fb6762851b6d6
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
Do not use this driver in conjunction with OM5.2 (OpenManage). Installation of OM5.2 on Windows Server 2008 (W2K8 installed on the system through CERC SATA 1.5 6-ch) will push the system into an indefinite reboot condition.
Windows Server 2008 x86
CERC SATA1.5/6ch
INFO,PWS470,C3,SATA,R0,3 HDD
INFO,PWS670,C3,BOOTNO,S,R03HD
INFO,PWS670,C3A,BOOTNO,S,R04HD
Instructions for ADAPTEC_CERC-SATA1-5-6CH_A00_R180082.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Copy the files form the package to a media device supported by the system.
Windows 2008 supports floppies, USB keys, CD & DVD drives.
Installing the Driver during Operating System Installation
--------------------------------------------------------------
1. Power up the system and boot to the Microsoft Windows Server 2008 DVD.
2. Follow the on-screen instructions until you reach the
"Where do you want to install Windows?" section.
3. Select "Drive options (advanced)"
4. Press on "New" to create a partition to install Windows 2008, select
the size in MB and click "Apply" (consult Windows 2008 user manual
to select a drive size that meets the OS demands).
5. Select "Load Driver" and browse to the location where you have copied
the Windows 2008 driver.
6. Select the RAID controller used for this installation. The system will
automatically select one controller. Press "Next".
7. After the driver loads you will return to the "Where do you want to
install Windows?" screen (partitions can be configured on this screen).
Click "Next" again to continue with the installation process.
Dell Update Package Instructions for DRVR_WIN_R180082.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Custom Instructions for R180082.txt:
Instructions for R180082.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Release Notes window appears.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Copy the files form the package to a media device supported by the system.
Windows 2008 supports floppies, USB keys, CD & DVD drives.
Installing the Driver during Operating System Installation
--------------------------------------------------------------
1. Power up the system and boot to the Microsoft Windows Server 2008 DVD.
2. Follow the on-screen instructions until you reach the
"Where do you want to install Windows?" section.
3. Select "Drive options (advanced)"
4. Press on "New" to create a partition to install Windows 2008, select
the size in MB and click "Apply" (consult Windows 2008 user manual
to select a drive size that meets the OS demands).
5. Select "Load Driver" and browse to the location where you have copied
the Windows 2008 driver.
6. Select the RAID controller used for this installation. The system will
automatically select one controller. Press "Next".
7. After the driver loads you will return to the "Where do you want to
install Windows?" screen (partitions can be configured on this screen).
Click "Next" again to continue with the installation process.
Dell Update Package Instructions for DRVR_WIN_R180082.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Custom Instructions for R180082.txt:
Instructions for R180082.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Release Notes window appears.