Pacchetto firmware per LiteOn da 1100W (n. comp.: GYH9V)
Riavvio richiestoINSTALLATO AUTOMATICAMENTEQuesto file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
This package provides the new firmware for power supplier and is supported on LiteOn 1100W PSU (PN: GYH9V) running on the Windows and Linux operating systems.
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema
Cerca supporto
Inserisci il modello o il codice di matricola Dell
Nessun risultato trovato. La ricerca non ha prodotto risultati. Modifica la ricerca e riprova.
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema.Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Dell Technologies consiglia di rivedere questo aggiornamento per stabilire se è applicabile al sistema. L'aggiornamento contiene modifiche che interessano solo alcune configurazioni oppure offre nuove funzioni applicabili o meno all’ambiente in questione.
Formato file:Pacchetto di aggiornamento per Microsoft Windows a 32 bit
Nome file:Power_Firmware_N9V70_WN32_07.12.52_A00-01.EXE
Dimensioni file:4.36 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 32 bit sono stati progettati per essere eseguiti su sistemi operativi Microsoft Windows a 64 bit. I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 64 bit verranno eseguiti solo su sistemi operativi Microsoft Windows a 64 bit. Quando si seleziona un aggiornamento dei driver di un dispositivo, assicurarsi di selezionare quello appropriato per il sistema operativo in uso.
Formato file:Un file GnuPG contenente una firma crittografica
Nome file:Power_Firmware_N9V70_LN32_07.12.52_A00-01.BIN.sign
Dimensioni file:194 Bytes
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
La firma GnuPG per il pacchetto di aggiornamento per Red Hat Linux può essere utilizzata per autenticare l'identità di Dell nel relativo pacchetto di aggiornamento per Red Hat Linux.
Formato file:Pacchetto di aggiornamento per Red Hat Linux
Nome file:Power_Firmware_N9V70_LN32_07.12.52_A00-01.BIN
Dimensioni file:2.17 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
I pacchetti Dell Update Packages per Linux possono essere utilizzati come applicazioni standalone che assicurano che vengano soddisfatti criteri di convalida specifici prima di eseguire un aggiornamento. Nota: i pacchetti di aggiornamento per Linux sono open source. Informazioni dettagliate sono contenute nel file leggimi dei pacchetti Dell Update Packages per Linux.
IMPORTANT: After a successful power supply firmware download, the managed system turns off for a duration ranging from three to ten minutes to continue updating the firmware. Once the firmware update is complete, the managed system reboots automatically.
CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT: After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs may take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for ".BIN" file:
Download 1. Click the Download Now link to download the file. 2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation 1. Read the release information presented by executing the".BIN" file with "--version" command from the shell. 2. Download and install any prerequisites identified in the above step before proceeding. 3. Run the update by executing ".BIN" file from the shell. 4. Follow the remaining prompts to perform the update. 5. Upon successful completion the DUP will prompt to reboot system. 6. Restart your system. After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware. 7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply. 8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" file:
Download 1. Click the "Download Now" link to download the file. 2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update. 6. Upon successful completion the DUP will prompt to reboot system. 7. Restart your system. After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware. 8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply. 9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" file:
Download 1. Click the "Download Now" link to download the file. 2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation 1. Import the Dell public key. (You only need to import once on your system.) 2. Verify the Dell Update Package by using its signature file. 3. Upon successful completion the DUP will prompt to reboot system. 4. Restart your system. After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware. 5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply. 6. Once the flashing process is complete the system should power back up and boot to OS. IMPORTANT: After a successful power supply firmware download, the managed system turns off for a duration ranging from three to ten minutes to continue updating the firmware. Once the firmware update is complete, the managed system reboots automatically.
CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.