AUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
The Embedded Server Management (ESM) flash utility is a tool to update firmware (FW) to the Baseboard Management Controller (BMC) and all devices connected to it on the system management bus (SMB). The devices currently implemented in the utility are: * Baseboard Management Controller (BMC) * Primary and Secondary System Backplane (SBP) * Chassis Bridge Controller (CBC)
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
- Inordinate number of SEL entries concerning the PCI cards no longer recorded. - Different types of Reset conditions are explicitly identified in the SEL (Front Panel INIT and A/C Power loss). Reset no longer produces an entry.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
1. Copy/download the files to an LS-120 diskette 2. Insert the diskette into your PE7150 3. Boot your PE7150 4. From the EFI Boot Manager menu, choose utilities 5. From the Utilities menu, choose Firmware Update 6. From the Firmware Update menu, pick the \PE7150_FW_A03 item 7. Using a series of prompts all required firmware will be updated
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok