Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell Server Custom BIOS, 6.0.7
AUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
OEMR T710, BIOS, 6.0.7
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
* Updated MRC. * Updated the iDRAC Configuration Utility. * Enabled C state Auto Demotion capability. * Corrected an issue where ESXi 5.0 failed to boot in UEFI boot mode. * Removed the word "Integrated" from "Integrated Daughter Card" BIOS string. * Added FlexAddressPlus support for uncommonly partitioned and configured CNA cards. * Corrected an issue where Single Bit Errors were not being detected when Memory Mode was set to Advanced ECC Mode and Node Interleaving was disabled. * Updated nested Power Profile dependencies. * Corrected an issue where UEFI Boot Manager was displaying multiple "EFI Fixed Disk boot device" string messages.
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
1ed433526caf5a3c4f87fea3541bd5b7
SHA1:
Not available
SHA-256:
Not available
Fájlformátum:Flash BIOS executable
Fájlnév:810F-060007.exe
Fájlméret:1.56 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
Download 1. Click the "Download Now" link to download the file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files. 1. Browse to the location where you downloaded the file. 2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format. 3. Copy the file to the bootable device. 4. Boot the system to DOS by using the bootable device. 5. Run the executable under DOS. Follow the instructions provided by the flash utility.
Instructions for 810F-060007-BSU-BDP.exe:
Important Notes:
1. This utility should only be used for installing a replacement motherboard. Use of this utility for other purposes may render the current application inoperable. Please consult Dell support/services before using this utility. 2. You must download the Non-Packaged BIOS flash utility executable file in addition to this file. Both files are necessary to run this utility.
Download 1. Click the "Download Now" link to download the Board Service Utility file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive. 4. Repeat steps 1 through 3 to download the Non-Packaged BIOS flash utility executable file.
Installation NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files. Both the Board Service utility executable and the NonPackaged BIOS flash utility executable files must be copied to the same bootable media.
1. Browse to the location where you downloaded the files. 2. Update the name of each file to DOS recognizable format 8.3. If you do not update the filenames to 8.3 format, they will be truncated to 8.3 format. 3. Copy the files to the bootable device. 4. Boot the system to DOS by using the bootable device. 5. Run the Board Service Utility executable under DOS, providing the flash utility executable file name as the input argument. Follow the instructions of the utility.
Example - Non-Packaged BIOS flash utility file is renamed to flash.exe
Boot to a DOS media, and run the command "810F-060007-BSU-BDP.exe flash.exe"
Important Notes:
1. This utility should only be used for installing a replacement motherboard. Use of this utility for other purposes may render the current application inoperable. Please consult your support/services before using this utility.
NOTE: In order to create BIOS update media using this package, this file must be downloaded to and executed on a system running Microsoft Windows. This package can be used to create a bootable, USB flash drive or CD.
Download
1. Select the download method you want to use to retrieve the file - either HTTP or FTP. 2. If the Export Compliance Disclaimer window appears, read the agreement and then select either "I agree" or "I disagree". 3. When the File Download window appears, click Save. 4. From the Save As dialog, select a location and a file name then click "Save". 5. If a Download Complete window appears, click Close.
BIOS Update Media Creation
1. Browse to the location where you downloaded the file and double-click it to extract the BIOS update files and start the distribution application. 2. Specify the location to unzip the files and click Unzip to extract files. After the files are extracted, a message should appear indicating that all files were successfully unzipped. 3. Click the OK button to start the BIOS Distribution Package. Follow the on screen prompts to cr
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.