Windows 2003 Driver for Dell PERC S300 Adapter, PERC S300 Integrated Modular, PERC S100 Integrated, RMSD_PERC S100 Integrated, v.2.0.0.0162, A05
Újraindítás szükségesAUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Windows Server 2003 S100/S300 Controllers
Ajánlott
Kompatibilitás ellenőrzése
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
Nincs találat.Nem találtunk semmit, amit keresne. Módosítsa a keresést arra, hogy szervizcímkét (B959FS3) vagy típust (Latitude 5540) ad meg, ezután pedig próbálja újra.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
- Background Array Scan
- Boot to RD1000 Tape
- Consistency Check startup on existing virtual disks after a new virtual disk is created
- Default VD cache policy is changed to "No caching"
- Support for CougarPoint chipset for S100
- New System support for S300: Coaster, Diamas and Skipper, Slinky
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
a6a0882b4c25c18a73f10289daeaed80
SHA1:
4a21e38611636da13cb758b6183afd9790b48e48
SHA-256:
Not available
Fájlformátum:ZipPack External
Fájlnév:DELL_MULTI-DEVICE_A05_R294493.exe
Fájlméret:376.84 KB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
- Only a single ODD is supported as a boot device. Up to two ODDs can be supported on a system. - When installing an S300, make sure the S100 is disable in the platforms BIOS. The ODD will not function if S100 is active with S300. - W2K3 SP2 or later required for S100 and S300. NOTE! Windows 2003 R2 is not supported. - The BCRAID.SYS and BCCFG.SYS drivers both need to be updated when performing an update using the Zip Pack. Each driver is updated manually. - OM 6.2.0 or higher required to manage S100 and S300 controllers.
Download 1. Click Download Now to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Zip Files
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click OK to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click OK to exit from the installer.
Installation 1. Copy extracted files to media accessible to Windows. 2. Reboot system to Windows OS. 3. Follow Server Manager->Device Manager->Storage Controller, click on the PERC Controller. 5. Click on Update Driver Software and follow the prompts to update the driver. 4. Reboot system for changes to take effect.
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok