AUTO-INSTALLATIONCe fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Adaptec 39160 SCSI Controller BIOS
Recommandé
Trouver le meilleur téléchargement pour votre système
Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.
Rechercher dans le support
Saisir votre modèle ou numéro de série Dell
Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit.Comment faire
Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.
Connectez-vous à Windows en tant qu’administrateur pour utiliser les fonctionnalités d’analyse automatique. Si vous êtes déjà connecté en tant qu’administrateur et que vous voyez ce message, redémarrez.Votre système est géré par votre administrateur IT et peut avoir des fonctionnalités limitées.
Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.
Correctifs et améliorations
Includes all fixes and enhancements in Dell Special code stream and Adaptec Service Pack code stream (listed below): 3.0 New Features: -Single Image -Supports Int 13h extension : check extension present, AH=30h -Supports SCSI pass through; Int 13h AH=50h -PnP header table limit is obtained from system BIOS that support the function "Get Device Count". - key to toggle color/monochrome video display mode will be removed -In the Host Adapter Configuration screen, the 'SCSI Termination Level' information will be removed -In the Boot Device configuration screen, the 'Select SCSI Peripheral from which to boot' option will not be available to the systems that support BIOS Boot Specification (BBS). -In the Boot Device Configuration screen, another option will be added to configure the master channel for the single image feature; for the Ultra160 dual channel chip, either function can be the master -In the Advance Configuration Options screen, POST display mode will support silent, normal and diagnostics menu -In the Advance Configuration Options screen, 'BIOS support Int 13h extension' will be removed -In the Disk Utilities screen, the device capacity will displayed up to XXX GB -In the Disk Utilities screen, the format progress will be displayed if the drive does support progress status bytes in the sense key
3.10 New Features: -EFI legacy compliance
Bugs Fixed: - More robust PnP checking - El Torito AH=4Ch, Initiate disk emulation and boot - Allocate EBDA as needed during runtime INT 13h calls - Fresh installation hangs on Win2k due to conflict with CHIM code - Display capacity for SAFTE
Dell Technologies recommande d’effectuer cette mise à jour au cours du prochain cycle de mise à jour planifié. La mise à jour contient des modifications permettant de maintenir l’intégrité globale du système. Elle garantit que le logiciel du système reste à jour et compatible avec d’autres modules système (firmware, BIOS, pilotes et logiciels) et peut inclure d’autres nouvelles fonctionnalités.
Format de fichier :Une ou plusieurs images de disque dans un zip (tous à extraction automatique)
Nom du fichier :160FW310.exe
Taille du fichier :293.19 KB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce fichier contient un ensemble de fichiers compressés (ou zippés). Téléchargez le fichier vers un dossier de votre disque dur et double-cliquez dessus pour décompresser les fichiers. Suivez les instructions pour terminer l’installation.
In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
*NOTE: If the 39160 HBA is NOT the boot controller in your system, it is highly recommended to disable INT13h support (done in the SCSISelect boot time utility - invoked by pressing 'Ctl-A' when prompted to do so during POST) for the 39160 adapter, since this could impact interoperation with the boot controller.
NOTE: For PV725N users, please refer to the online documentation "Upgrading your 39160 SCSI card firmware" available in the PV725N User Guides section of http://support.dell.com
Floppy Disk Boot to Disk for 160FW310.exe
Download IMPORTANT NOTE: For Netware & Linux Users, this diskette creation file must be downloaded to and executed on a system running Microsoft Windows 9x or above in order to create the bootable floppy disk. 1. Click Download Now, to download the file. 2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement. 3. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears. 4. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 5. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Hard Drive Floppy Disk Creation 1. Get 1 blank, formatted floppy disk. 2. Double-click the new icon (it looks like a floppy diskette) on the desktop. The Self-Extractor window appears. 3. Click Setup. A black MS-DOS window appears with a message indicating that you need 1 floppy diskette. 4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. Insert a floppy disk into the floppy disk drive. 5. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased. 6. Press the [y] key and then press the [ENTER] key. The files are copied to the floppy diskette. 7. After all the files have been copied to the floppy disk, press the [ENTER] key and the MS-DOS window closes.
Install 1. Insert the newly created floppy disk into the Floppy drive of the system to be upgraded. 2. Reboot your system. 3. Once system has booted to diskette, follow instructions as they appear on the system console. They will guide you through the update process, including the subsequent reboots needed to clear the card of legacy image information. Refer to README.TXT file for more information.