Redémarrage requisAUTO-INSTALLATIONCe fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
The Intel SATA Solid-State Drive firmware update tool provides the latest firmware for the following Intel Solid-State Drives in all capacities: Intel X25-M X18-M SATA Solid-State Drive on 50nm (black case) Intel X25-E SATA Solid-State Drive on 50nm (black case) Intel X25-M X18-M SATA Solid-State Drive on 34nm (silver case) Intel X25-V Value SATA Solid-State Drive on 34nm Intel Solid-State Drive 320 Series
Recommandé
Vérifier la compatibilité
Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.
Saisir votre modèle ou numéro de série Dell
Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit.Comment faire
Aucun résultat trouvé.Votre recherche n’a renvoyé aucun résultat. Veuillez modifier votre recherche, saisir une étiquette de service (B959FS3) ou un modèle (Latitude 5540) et réessayez.
Ce pilote n’est pas compatible
Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.
Connectez-vous à Windows en tant qu’administrateur pour utiliser les fonctionnalités d’analyse automatique. Si vous êtes déjà connecté en tant qu’administrateur et que vous voyez ce message, redémarrez.Votre système est géré par votre administrateur IT et peut avoir des fonctionnalités limitées.
Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.
Dell Technologies recommande d’effectuer cette mise à jour au cours du prochain cycle de mise à jour planifié. La mise à jour contient des modifications permettant de maintenir l’intégrité globale du système. Elle garantit que le logiciel du système reste à jour et compatible avec d’autres modules système (firmware, BIOS, pilotes et logiciels) et peut inclure d’autres nouvelles fonctionnalités.
Format de fichier :Une ou plusieurs images de disque dans un zip (tous à extraction automatique)
Nom du fichier :INTEL_S320_FW0362.exe
Taille du fichier :1.64 MB
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce fichier contient un ensemble de fichiers compressés (ou zippés). Téléchargez le fichier vers un dossier de votre disque dur et double-cliquez dessus pour décompresser les fichiers. Suivez les instructions pour terminer l’installation.
1. Load the .ISO image onto a blank CD (CD-R or CD-RW) using CD-ROM burning software of your choice. 2. Ensure the Intel SSD is attached to a SATA port in the system. For best results, ensure the SATA port is a native control port of your south bridge controller (generally SATA ports 0 through 4). SATA ports attached to a third-party SATA controller bridge chip or add-in SATA controller expansion cards are not recommended for use when updating the firmware. For more details, consult your system technical documentation. 3. Insert the Intel SATA SSD Firmware Update CD into the system. 4. Ensure the CD-ROM drive is enabled as a bootable device in BIOS and the CD-ROM boot priority is ahead of the drive containing the OS boot partition. For more details, consult your system documentation. 5. Complete a safe system shutdown and power off completely, count to 10 (seconds), and then reboot the system. A restart or warm reset (CTRL-ALT-DEL) is not adequate. 6. Power on your system to start the update process. - The tool will prompt you through the update process for all the SSDs that qualify for the firmware update in your system. - To verify that the firmware update is complete, power down per step 5 above with the CD still installed and let the firmware update software scan for SSDs in your system again. The scan should now display your SSD and the firmware should now show the new firmware number for your specific SSD. - Once the firmware has been verified, remove the CD and power down the system again. - If you changed SATA port mode from AHCI to "Compatibility" or or "Legacy" mode for the firmware update, ensure you change the port back to AHCI mode for best performance. Note: For computers booting into Windows 7 after a firmware update, a message appears when the operating system starts that prompts you to restart the computer. Restart when prompted. If you have questions about any of these steps, please contact Intel Customer Support for further assistance at the following website: http://www.intel.com/go/ssdsupport/
4. INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User) IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.