AUTO-INSTALLATIONCe fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
This package provides the Seagate ST9160412AS/ST9250410AS/ST9320423AS/ST9500420AS Firmware Update and is supported on Inspiron, Studio XPS Laptop, Studio Laptop and Optiplex models that are running the following Windows Operating Systems: XP, Vista and Windows 7.
Recommandé
Vérifier la compatibilité
Saisissez les détails de votre produit pour afficher les dernières informations sur le pilote de votre système.
Saisir votre modèle ou numéro de série Dell
Vous souhaitez rechercher votre produit ? Saisissez un identifiant de produit.Comment faire
Aucun résultat trouvé.Votre recherche n’a renvoyé aucun résultat. Veuillez modifier votre recherche, saisir une étiquette de service (B959FS3) ou un modèle (Latitude 5540) et réessayez.
Ce pilote n’est pas compatible
Ce pilote ne s’applique pas au produit sélectionné. Choisissez un autre produit pour saisir de nouveau les détails de votre produit pour ce pilote ou rendez-vous sur la page du support produit pour afficher tous les pilotes d’un autre produit.
Connectez-vous à Windows en tant qu’administrateur pour utiliser les fonctionnalités d’analyse automatique. Si vous êtes déjà connecté en tant qu’administrateur et que vous voyez ce message, redémarrez.Votre système est géré par votre administrateur IT et peut avoir des fonctionnalités limitées.
Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.
Correctifs et améliorations
Fixes - Fixed clicking noise Enhancements - Not Applicable
Dell Technologies recommande d’effectuer cette mise à jour au cours du prochain cycle de mise à jour planifié. La mise à jour contient des modifications permettant de maintenir l’intégrité globale du système. Elle garantit que le logiciel du système reste à jour et compatible avec d’autres modules système (firmware, BIOS, pilotes et logiciels) et peut inclure d’autres nouvelles fonctionnalités.
Ce fichier est volumineux. En fonction de la vitesse de votre connexion, le téléchargement peut prendre un certain temps.
Description du format:
Ce fichier contient un ensemble de fichiers compressés (ou zippés). Téléchargez le fichier vers un dossier de votre disque dur, puis exécutez-le (double-clic) pour décompresser les fichiers. Suivez les instructions pour terminer l’installation.
Custom Instructions for R250679.EXE: * PLEASE PRINT THE FOLLOWING INSTRUCTIONS * For Bootable CD option (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE) 1. Click on the (R250679.EXE) file and select ""RUN"" then ""RUN"" again. 2. Press ""Continue"" then ""OK"" to extract the files to the provided location. 3. If you have CD imaging software that supports the .ISO image format the file ""C:\DELL\Drivers\R250679\Seagate Utility.ISO"" is an image for a bootable CD that will automatically run the application. 4. Boot to the CD. 5. The Seagate utility will start automatically. 6. The utility will auto scan and update the appropriate Seagate ST9160412AS, ST9250410AS, ST9320423AS, ST9500420AS. 7. Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. 8. Remove the CD and power off your PC. 9. Power on your PC to continue normal operation. For Other Bootable option (IE. USB key, etc.)(PLEASE MAKE SUREA/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE) 1. Click on the (R250679.EXE) file and select ""RUN"" then ""RUN"" again. 2. Press ""Continue"" then ""OK"" to extract the files to the provided location. 3. The files are located in ""C:\DELL\Drivers\R250679\Files"" directory. 4. Add the files to your bootable media and run the ""FLASH.bat"". 5. The Seagate utility will start automatically. 6. The utility will auto scan and update the appropriate Seagate ST9160412AS, ST9250410AS, ST9320423AS, ST9500420AS. 7. Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. 8. Remove the Bootable Media and power off your system.