Seagate Cheetah VI 10K 146LP U320 36GB 68Pin, Cheetah VI 10K 146LP U320 36GB 80Pin, Cheetah VI 10K 146LP U320 73GB 68Pin, Cheetah VI 10K 146LP U320 73GB 80Pin, Cheetah VI 10K 146LP U320 146GB 68Pin, Cheetah VI 10K 146LP U320 146GB 80Pin, v.DS09, A00
ASENNETTU AUTOMAATTISESTITämä tiedosto asennettiin automaattisesti osana hiljattaista päivitystä. Jos sinulla on tässä ongelmia, voit ladata ja asentaa sen manuaalisesti uudelleen.
Tämän sivun sisältö on saatettu kääntää automaattisesti. Voit antaa palautetta täyttämällä sivun alareunassa olevan lomakkeen.
Tämä tiedosto asennettiin automaattisesti osana hiljattaista päivitystä. Jos sinulla on tässä ongelmia, voit ladata ja asentaa sen manuaalisesti uudelleen.
This utility updates the SCSI Seagate Cheetah 10K Drives firmware to DS09. This version addresses compatibility issues when drives are installed in U320 capable PV220/PV221S enclosures and other general quality improvements. The following Seagate drives are supported in this release: Seagate Model # ST3146807LW Seagate Model # ST3146807LC Seagate Model # ST336607LW Seagate Model # ST336607LC Seagate Model # ST373307LW Seagate Model # ST373307LC
Suositellut
Tarkista yhteensopivuus
Voit tarkastella järjestelmäsi uusimpia ajuritietoja antamalla tuotteen tiedot.
Anna Dell-palvelutunniste tai -malli
Haluatko etsiä tuotteesi? Anna tuotetunnistin.Ohjeet
Tuloksia ei löytynyt. Haku ei tuottanut tuloksia. Lisää hakuun palvelutunnus (B959FS3) tai malli (Latitude 5540) ja yritä uudelleen.
Tämä ajuri ei ole yhteensopiva
Tämä ohjain ei sovi valitulle tuotteelle. Valitse toinen tuote, jos haluat antaa ohjaimen tuotetiedot uudelleen, tai siirry tuotetukisivulle, jossa voit tarkastella eri tuotteen kaikkia ohjaimia.
Kirjaudu Windowsiin järjestelmänvalvojana, jotta voit käyttää automaattista tarkistusta. Jos olet jo kirjautunut järjestelmänvalvojana ja näet tämän viestin, käynnistä järjestelmä uudelleen.Järjestelmänvalvoja hallinnoi järjestelmääsi, minkä vuoksi ominaisuuksia voi olla rajoitettu.
Etsi lisää päivityksiä. Etsi laitteesi uusimmat ajuripäivitykset SupportAssistin avulla.
Korjaukset ja parannukset
This version corrects issues found with drives going intermittently Off-line, or a hang condition with drives installed in U320 capable PV220/PV221S systems and introduces other quality improvements.
Dell Technologies kehottaa asentamaan tämän tärkeän päivityksen mahdollisimman nopeasti. Päivitys sisältää keskeiset virheenkorjaukset ja muutokset, jotka parantavat Dell-järjestelmän toimintoja, luotettavuutta ja vakautta. Se voi sisältää myös suojauskorjauksia ja muita ominaisuuksien parannuksia.
Tiedostomuoto:Itsepurkautuvan zip-tiedoston sisällä on yksi tai useampi itsepurkautuva levykuva
Tiedostonimi:BR71432.exe
Tiedoston koko:873.65 KB
Tiedosto on suuri. Lataus saattaa kestää jonkin aikaa, jos yhteys on hidas.
Alusta kuvaus:
Tämä tiedosto sisältää pakattuja (zipattuja) tiedostoja. Lataa tiedosto kiintolevyllä olevaan kansioon ja pura tiedostot kaksoisnapsauttamalla tiedostoa. Suorita asennus loppuun toimimalla ohjeiden mukaan.
Utility must be placed on a non-write protected diskette.
NOTE: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
Download 1. Click the "Download Now" link to download the file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Diskette Creation 1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set. 2. Insert a blank diskette then click Continue. 3. After all the files have been copied to the last, click Finish.
Installation: NOTE: BACKUP ALL DATA BEFORE RUNNING THIS PROGRAM. Do not remove power from the devices or disturb the devices in any way while the download is in progress. Dell, Inc is not Responsible for any data loss resulting from the use of this program
NOTE: Before proceeding with the update, refer to README.TXT file, section 3.0 "Using The Update Utility" for important information regarding the update process.
Upon booting up from Update diskette, the user is displayed a menu and prompted to select the type of SCSI or RAID controller whose SCSI HDD is connected to.
If PERC3/xx, PERC4/xx is selected, the user is prompted to select the channel number the drives are connected to:
1)Update Drives connected to Channel 0 of PERC3 ? 2)Update Drives connected to Channel 1 of PERC3 ? 3)Update Drives connected to Channel 2 of PERC3 ? 4)Update Drives connected to Channel 3 of PERC3 ?
Once the controller selection has been made, utility will prompt the user to continue the update. Follow the prompts to completely update all target Seagate U320 10K devices found.
Once the update is complete Remove the diskette and reboot the system.