Dell EMC OpenManage Integration Version 7.2 for Microsoft System Center Operations Manager
ASENNETTU AUTOMAATTISESTI Tämä tiedosto asennettiin automaattisesti osana hiljattaista päivitystä. Jos sinulla on tässä ongelmia, voit ladata ja asentaa sen manuaalisesti uudelleen.Tämän sivun sisältö on saatettu kääntää automaattisesti. Voit antaa palautetta täyttämällä sivun alareunassa olevan lomakkeen.
Dell EMC OpenMange Integration Version 7.2 for Microsoft System Center for Operations Manager (OMIMSSC):
The Dell EMC OMIMSSC appliance is an integration with System Center Operations Manager (SCOM) to cater to discovery, inventory, health monitoring, performance metrics monitoring, and alert monitoring of Dell EMC devices. The Dell EMC OMIMSSC for SCOM solution offers the agent-free monitoring of Dell EMC Servers and Rack Workstations (through iDRAC using WSMAN), Chassis and Network Switches along with the existing or legacy management packs to perform the agent-based monitoring of Dell EMC Servers and Rack Workstations through iSM using WMI or the OMSA agent.
The integration of the Dell EMC OpenManage Integration for Microsoft System Center version 7.2 Operations Manager enables you to discover and monitor the Dell EMC Servers, Integrated Dell EMC Remote Access Controllers (iDRAC), Dell EMC Chassis Management Controller (CMC)/OpenManage Enterprise – Modular(OME-M), and Network Switches with below supported Versions.
Supported System Center Operations Manager(SCOM) versions:
- System Center Operations Manager 2019
- System Center Operations Manager 2016
- System Center Operations Manager 1807
- System Center Operations Manager 1801
- System Center Operations Manager 2012 R2
The Dell EMC Server Management Pack Suite (DSMPS) for System Center Operations Manager 2019, System Center Operations Manager 1807,
System Center Operations Manager 1801, System Center Operations Manager 2016 and System Center Operations Manager 2012 R2 enables the monitoring of Dell EMC Servers, Integrated Dell Remote Access Controllers (iDRAC). The management packs provide Dell-specific views that you can use to observe and
drill down the system status in a network.
The DSMPS supports agent-based monitoring with individual management packs for monitoring of Windows Servers through OMSA (License-free) and iSM (Licensed) as applicable
The Dell EMC OMIMSSC appliance is an integration with System Center Operations Manager (SCOM) to cater to discovery, inventory, health monitoring, performance metrics monitoring, and alert monitoring of Dell EMC devices. The Dell EMC OMIMSSC for SCOM solution offers the agent-free monitoring of Dell EMC Servers and Rack Workstations (through iDRAC using WSMAN), Chassis and Network Switches along with the existing or legacy management packs to perform the agent-based monitoring of Dell EMC Servers and Rack Workstations through iSM using WMI or the OMSA agent.
The integration of the Dell EMC OpenManage Integration for Microsoft System Center version 7.2 Operations Manager enables you to discover and monitor the Dell EMC Servers, Integrated Dell EMC Remote Access Controllers (iDRAC), Dell EMC Chassis Management Controller (CMC)/OpenManage Enterprise – Modular(OME-M), and Network Switches with below supported Versions.
Supported System Center Operations Manager(SCOM) versions:
- System Center Operations Manager 2019
- System Center Operations Manager 2016
- System Center Operations Manager 1807
- System Center Operations Manager 1801
- System Center Operations Manager 2012 R2
The Dell EMC Server Management Pack Suite (DSMPS) for System Center Operations Manager 2019, System Center Operations Manager 1807,
System Center Operations Manager 1801, System Center Operations Manager 2016 and System Center Operations Manager 2012 R2 enables the monitoring of Dell EMC Servers, Integrated Dell Remote Access Controllers (iDRAC). The management packs provide Dell-specific views that you can use to observe and
drill down the system status in a network.
The DSMPS supports agent-based monitoring with individual management packs for monitoring of Windows Servers through OMSA (License-free) and iSM (Licensed) as applicable
Suositellut
Etsi paras lataus järjestelmällesi
Voit tarkastella järjestelmäsi uusimpia ajuritietoja antamalla tuotteen tiedot.Tämä ajuri ei ole yhteensopiva
Tämä ohjain ei sovi valitulle tuotteelle. Valitse toinen tuote, jos haluat antaa ohjaimen tuotetiedot uudelleen, tai siirry tuotetukisivulle, jossa voit tarkastella eri tuotteen kaikkia ohjaimia.
Kirjaudu Windowsiin järjestelmänvalvojana, jotta voit käyttää automaattista tarkistusta. Jos olet jo kirjautunut järjestelmänvalvojana ja näet tämän viestin, käynnistä järjestelmä uudelleen. Järjestelmänvalvoja hallinnoi järjestelmääsi, minkä vuoksi ominaisuuksia voi olla rajoitettu.
Etsi lisää päivityksiä. Etsi laitteesi uusimmat ajuripäivitykset SupportAssistin avulla.
Korjaukset ja parannukset
Fixes: N/A
Enhancements:
Dell EMC OpenManage Integration version 7.2 for Microsoft System Center for Operations Manager(SCOM) brings the following feature:
-Support for deploying the Dell EMC OMIMSSC appliance for System Center Operation Manager(SCOM) version 7.2 on the following VMware ESXi versions using .ova file:
-Version 6.5
-Version 6.7
-Version 7.0
along with the existing support for deploying Dell EMC OMIMSSC appliance for SCOM on Hyper-V using .vhd file.
-Update Rollup 1 for System Center Operations Manager 2019.
-Update Rollup 8 for System Center Operations Manager 2016.
-Update Rollup 9 for System Center Operations Manager 2016.
-Support for environments where System Center Operation Manager(SCOM) with gateway servers is deployed, where SCOM MS with Proxy MS, Dell EMC OMIMSSC appliance, and iDRACs are part of the same management network.
-Support for latest iDRAC 9-based PowerEdge servers. For more information about the iDRAC 9-based PowerEdge servers,
see www.dell.com/support/article/en-n/sln308699/idrac9-versions-and-release-notes?lang=en.
The latest iDRAC 9-based PowerEdge servers are:
PowerEdge R6515
PowerEdge R7525
PowerEdge C6525
PowerEdge R6525
PowerEdge R7515
-Support for hardware monitoring of PowerEdge XE240 server using the Server and Rack Workstation(Licensed) - iDRAC agent free monitoring
-Support for backup and restore of OMIMSSC appliance.
-Service pack update feature is enhanced with an autoupdate of applicable Dell EMC Management Packs that have been imported previously in the Operations Manager console, appliance kernel RPMs, and application RPMs. The update can be performed using online repository.
-The Dell EMC OMIMSSC for SCOM version 7.2 contains medium severity security fixes. The customers, who are affected with previous versions are advised to upgrade to the latest version.
LisätietojaEnhancements:
Dell EMC OpenManage Integration version 7.2 for Microsoft System Center for Operations Manager(SCOM) brings the following feature:
-Support for deploying the Dell EMC OMIMSSC appliance for System Center Operation Manager(SCOM) version 7.2 on the following VMware ESXi versions using .ova file:
-Version 6.5
-Version 6.7
-Version 7.0
along with the existing support for deploying Dell EMC OMIMSSC appliance for SCOM on Hyper-V using .vhd file.
-Update Rollup 1 for System Center Operations Manager 2019.
-Update Rollup 8 for System Center Operations Manager 2016.
-Update Rollup 9 for System Center Operations Manager 2016.
-Support for environments where System Center Operation Manager(SCOM) with gateway servers is deployed, where SCOM MS with Proxy MS, Dell EMC OMIMSSC appliance, and iDRACs are part of the same management network.
-Support for latest iDRAC 9-based PowerEdge servers. For more information about the iDRAC 9-based PowerEdge servers,
see www.dell.com/support/article/en-n/sln308699/idrac9-versions-and-release-notes?lang=en.
The latest iDRAC 9-based PowerEdge servers are:
PowerEdge R6515
PowerEdge R7525
PowerEdge C6525
PowerEdge R6525
PowerEdge R7515
-Support for hardware monitoring of PowerEdge XE240 server using the Server and Rack Workstation(Licensed) - iDRAC agent free monitoring
-Support for backup and restore of OMIMSSC appliance.
-Service pack update feature is enhanced with an autoupdate of applicable Dell EMC Management Packs that have been imported previously in the Operations Manager console, appliance kernel RPMs, and application RPMs. The update can be performed using online repository.
-The Dell EMC OMIMSSC for SCOM version 7.2 contains medium severity security fixes. The customers, who are affected with previous versions are advised to upgrade to the latest version.
Versio
7.2.0, A00
Julkaisupäivä:
23 heinäk. 2020
Lataustyyppi
Sovellukset
Luokka
Järjestelmien hallinta
Tärkeys
SuositeltuDell Technologies suosittelee asentamaan päivityksen seuraavan päivityskierroksen yhteydessä. Päivitys sisältää muutoksia järjestelmän yleisen kunnon säilyttämiseksi. Se varmistaa, että järjestelmäohjelmisto pysyy ajan tasalla ja yhteensopivana muiden järjestelmämoduulien kanssa (laiteohjelmisto, BIOS, ohjaimet ja ohjelmistot) ja sisältää myös muita uusia ominaisuuksia.
Käytettävissä olevat muodot
Tiedostomuoto: Sovellus
Tiedostonimi: Dell_EMC_Server_Management_Pack_Suite_v7.2_A00.exe
Tiedoston koko: 8.41 MB
Tiedosto on suuri. Lataus saattaa kestää jonkin aikaa, jos yhteys on hidas.
Alusta kuvaus:
Sovellus
Varmista latauksen eheys vahvistamalla tarkistussumman arvo.
MD5:
1d176794003bcffc5b1fcf43226d00af
SHA1:
e2d3002a6c07a0e6fbc4c2e3137cdc402b0eea56
SHA-256:
22204d5e4fc6c2f4d9b7920e5e0d2910eeda5d93ffc2ca551c2d5bcb4d1799cc
Tiedostomuoto: Laiteohjelmistokuvat
Tiedostonimi: OMIMSSC_7.2.0_1434_SCOM.ova_A00.zip
Tiedoston koko: 2.22 GB
Tiedosto on suuri. Lataus saattaa kestää jonkin aikaa, jos yhteys on hidas.
Alusta kuvaus:
Varmista latauksen eheys vahvistamalla tarkistussumman arvo.
MD5:
00575f69f721603eb745eb29d232de83
SHA1:
6dfd23e359bb5fdf9891c76d779366005c2eed14
SHA-256:
5ae6671b6181740ee140caaa851914d166414d5060d2e01def7a153431526d2d
Tiedostomuoto: Purkaa tiedostot suoraan paikalliselle levylle
Tiedostonimi: OMIMSSC_7.2.0_1434_SCOM.vhd_A00.zip
Tiedoston koko: 2.4 GB
Tiedosto on suuri. Lataus saattaa kestää jonkin aikaa, jos yhteys on hidas.
Alusta kuvaus:
Tämä tiedostomuoto käsittää tiedostoarkiston, joka voidaan purkaa kiintolevyllä olevaan hakemistoon. Asennus voidaan sitten suorittaa kyseisestä hakemistosta.
Varmista latauksen eheys vahvistamalla tarkistussumman arvo.
MD5:
64a1542971a3dd5b811ab7119eb44238
SHA1:
74e19be6508156f970db908025e5d3d1d94c20f6
SHA-256:
fcb7b6e181028c5c95281d169b3ca8e4e070b503308292a628b52fd1fc0ff9a5
Lataamalla tiedoston hyväksyt Dellin ohjelmiston käyttöoikeussopimuksessa (englanniksi) määritetyt ehdot.
Tuetut käyttöjärjestelmät
Windows Server 2012
Ei sovellettavissa
Windows Server 2012 R2
Windows Server 2019 LTSC
Windows Server 2016
Sovelletaan kohteeseen
Management Pack for Microsoft System Center Operations Manager
Asennusohjeet
To install the Dell EMC OMIMSSC 7.2, ensure that you have the following pre-requisites:
-Install one of the following versions of Operations Manager:
- 2019
- 1807
- 1801
- 2016
-On systems running the Nano server version of Windows server 2016 operating system, apply the Update Rollup 1 for
-Microsoft System Center 2016 - Operations Manager agent package provided in the Microsoft knowledge base article KB3190029. For more information, see https://support.microsoft.com/en-us/help/3190029/update-rollup-1.
- 2012 R2
-Create a user account with local administrator privileges on the SCOM management server where OMIMSSC is installed. The account should be attached to the relevant domain and be a part of the SCOM administrators group.
-Create an account with Local administrator privileges on the management server where Dell EMC Server Management Pack Suite is installed.
-Enable the following Windows firewall rules:
- Operations Manager SNMP Response
- Operations Manager SNMP Trap Listener
- Operations Manager Ping Response
-Windows PowerShell 3.0 or later if your system is running Windows Server 2012 R2 Operating System.
-To download the OMIMSSC, perform the following steps:
1. Download the OMIMSSC file from the Dell support site.
2. Extract the .vhd file or an .ova file to set up the appliance.
NOTE: For more information refer the section "Install, and configure Dell EMC OMIMSSC" in the Installation Guide.
-Install one of the following versions of Operations Manager:
- 2019
- 1807
- 1801
- 2016
-On systems running the Nano server version of Windows server 2016 operating system, apply the Update Rollup 1 for
-Microsoft System Center 2016 - Operations Manager agent package provided in the Microsoft knowledge base article KB3190029. For more information, see https://support.microsoft.com/en-us/help/3190029/update-rollup-1.
- 2012 R2
-Create a user account with local administrator privileges on the SCOM management server where OMIMSSC is installed. The account should be attached to the relevant domain and be a part of the SCOM administrators group.
-Create an account with Local administrator privileges on the management server where Dell EMC Server Management Pack Suite is installed.
-Enable the following Windows firewall rules:
- Operations Manager SNMP Response
- Operations Manager SNMP Trap Listener
- Operations Manager Ping Response
-Windows PowerShell 3.0 or later if your system is running Windows Server 2012 R2 Operating System.
-To download the OMIMSSC, perform the following steps:
1. Download the OMIMSSC file from the Dell support site.
2. Extract the .vhd file or an .ova file to set up the appliance.
NOTE: For more information refer the section "Install, and configure Dell EMC OMIMSSC" in the Installation Guide.
Ohjainten ohje ja opetusohjelmat
Lisää ladattavia tiedostoja Ohjaimet ja ladattavat tiedostot. Ohjeita tämän sivun tietojen käyttämisestä saat Ohjainten ohje ja tukiopetusohjelmat -sivulta.