American Megatrends (AMI) PERC 2/SC, PERC2/DC, v.6.32.2.32, A00
INSTALADO AUTOMÁTICAMENTEEste archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
PERC 2/SC-DC device driver for Windows Server 2003.
Recomendado
Comprobar compatibilidad
Ingrese los detalles del producto para ver la información más reciente del controlador para el sistema
Ingrese su modelo o etiqueta de servicio de Dell
¿Desea buscar su producto? Ingrese un identificador de producto.Mostrarme cómo
No se encontraron resultados. No pudimos encontrar ningún resultado para la búsqueda. Modifique la búsqueda para ingresar una etiqueta de servicio (B959FS3) o un modelo (Latitude 5540) y vuelva a intentarlo.
Este controlador no es compatible
Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.
Inicie sesión en Windows como administrador para utilizar el escaneo automático. Si ya inició sesión como administrador y ve este mensaje, reinicie el sistema.El administrador de TI administra el sistema y es posible que las funciones sean limitadas.
Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
Changes from 6.25 =================
1) Changes in the setup files, so that Scsiport driver should give the correct device number and function number to the miniport driver.
2) A timeout is implemented in the driver so that driver shouldn't wait infinitely for the firmware to acknowledge the interrupt.
3) The driver will return an error status for all the offline logical drives.
4) Utilities are issuing 0xc3 calls for getting the logical drive statistics. This is causing the system to crash. This bug has been fixed in the driver.
5) The driver is using Hal functions to program hierarchy bridges and SCSI chips when system goes to D3 standby state.
The use of Hal functions were not allowing the driver to pass the HCT test. So we have to disable the Hal calls in the previous releases. A workaround has been done in the driver whereby all the Hal calls have been replaced by its assembly equivalent.
6) During reset, the driver was not clearing all the pending commands whenever the firmware is not able to complete it.
7) Driver is allocating enough continuous memory for the FLASH_WRITE_BLOCK(0x2c) command.
8) The system gives a blue screen when one swaps the boot controller. This bug has been fixed by adding entries of all the supported controllers in the critical data base section of the registry through changes in the oemsetup.inf file.
9) The system was not waking up after a hibernation/standby operation. This bug was caused by the driver. The driver was trying to access PCI_CONFIG space from the ScsiRestartAdapter in the driver. This bug has been fixed by accessing the PCI_CONFIG space from the ScsiSetRunningConfig entry point.
10) A new command has been introduced to enhance the performance for SCSI I/O on non-raid SCSI channel.
11) In case of standby, the driver was not waiting for the firmware to get initialized. This resulted in the driver sending commands to the firmware even when the firmware is not initialized. The fix has been put in the driver. The driver is polling for the Firmware to get initialized before sending any commands to the firmware.
Dell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización contiene cambios para mantener el estado general del sistema. Garantiza que el software del sistema permanezca actualizado y compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Formato de archivo:Paquete de actualizaciones para MS Windows de 32 bits
File Name:RAID-DRVR-R57743.exe
Tamaño del archivo:1.09 MB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Los paquetes de actualizaciones de Dell (DUP) en el formato de 32 bits de Microsoft Windows han sido diseñados para ejecutarse en los sistemas operativos de 64 bits de Microsoft Windows. Los paquetes de actualizaciones de Dell (DUP) en el formato de 64 bits de Microsoft Windows solo se ejecutarán en los sistemas operativos de 64 bits de Microsoft Windows. Al seleccionar una actualización de un controlador de dispositivo asegúrese de seleccionar el que sea apropiado para su sistema operativo.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
E0F3F8C4DA3D7411D3C530D342BE5D08
SHA1:
No disponible
SHA-256:
No disponible
Formato de archivo:Extrae archivos directamente al disco local
File Name:PERC2-WS2K3-632A00.exe
Tamaño del archivo:95.44 KB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este formato de archivo consiste en un archivo de archivos que se pueden descomprimir a un directorio en el disco duro. La instalación puede realizarse desde ese directorio.
This program creates a Windows 2000 driver diskette for the controllers. You will need a formatted 3 1/2 inch floppy diskette for the following procedure.
1) Download the file to a directory on your hard drive. The file downloaded is a self extracting executable. 2) Double click on the file to run the executable. 3) Click on the unzip button to extract files to the floppy.
Power down the system and install the PERC/CERC card. Configure the logical drives before proceeding with the driver install described below.
Installing on a new driver on a Windows Server 2003 system ----------------------------------------------------------
1) Boot the system using the Windows Server 2003 CD. As the message
"Press F6 if you need to install a third party SCSI or RAID driver."
appears, press F6 immediately.
2) Within a few minutes, a screen appears that asks for additional adapters in the system. Choose 'S'.
3) You are prompted for the driver diskette. Insert the PERC/CERC Windows Server 2003 driver diskette in the floppy drive and press Enter.
4) A list of drivers for PERC/CERC controllers appears. Select the right driver for your installed controller and press Enter to load the driver.
5) A statement is presented saying the driver that you provided is older then the Windows driver.
Press 'S' to use the driver on the floppy.
6) Press Enter again to continue installation process as usual.
Adding the PERC/CERC Driver to an Existing Windows Server 2003. --------------------------------------------------------------
1) Boot the system to Windows 2003. The Found New Hardware Wizard displays.
2) If you are installing the PERC 3/SC, PERC 4/DC PERC 4/SC, PERC 4/DI or CERC ATA100/4CH, click on Next and skip to step 5. Otherwise, click Cancel on all the new devices.
3) Restart the system from the shutdown menu.
4) The Found New Hardware Wizard displays again when the system boots to Windows Server 2003. Click on Next.
5) Select Search for a suitable driver and click Next to continue.
6) Select Floppy disk drive, insert the PERC/CERC Windows 2003 driver diskette created above and click Next to continue.
7) Continue to click on Next and finish the installation.
8) The Found New Hardware Wizard screen appears one time for each PERC 3/SC, PERC 4/SC, PERC 4/DC controller, three times for each PERC 3/DC or PERC 3/DCL controller and four times for each PERC 3/QC. Repeat steps 5 - 7 for each time the wizard displays to complete installation of the card.
9) To confirm driver installation, right click on My Computer and select Manage. Click on Device Manager, then click on SCSI and RAID controllers to see the newly added PERC 3 controller(s) in the list.
After finishing the driver update, YOU MUST REBOOT YOUR SERVER.
Updating the PERC/CERC Driver to an Existing Windows Server 2003. ------------------------------------------------------------------------
If your server is already running Windows Server 2003, use the following steps to update the PERC Windows Server 2003 driver.
1) Insert the PERC/CERC Windows Server 2003 driver diskette.
2) Position the mouse pointer on the my computer icon on your Start Menu andright click and select Manage.
3) Position the mouse pointer on Device Manager and click the left mouse button .
4) Position the mouse pointer on SCSI and RAID controllers and double click.
5) Select the PERC controller and double click.
6) Select the Driver tab
7) Select the Update Driver
The Upgrade Device Driver Wizard displays.
8) Select ”Install from a list of specific location” and click Next to continue.
9) Select “Search for the best driver in these locations” and make sure that the “search removable media (floppy, cd-rom,…)” option is checked. Then click on the Next but