Reinicio requeridoINSTALADO AUTOMÁTICAMENTEEste archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.
The Intel SATA Solid-State Drive firmware update tool provides the latest firmware for the following Intel Solid-State Drives in all capacities: Intel X25-M X18-M SATA Solid-State Drive on 50nm (black case) Intel X25-E SATA Solid-State Drive on 50nm (black case) Intel X25-M X18-M SATA Solid-State Drive on 34nm (silver case) Intel X25-V Value SATA Solid-State Drive on 34nm Intel Solid-State Drive 320 Series
Recomendado
Comprobar compatibilidad
Ingrese los detalles del producto para ver la información más reciente del controlador para el sistema
Ingrese su modelo o etiqueta de servicio de Dell
¿Desea buscar su producto? Ingrese un identificador de producto.Mostrarme cómo
No se encontraron resultados. No pudimos encontrar ningún resultado para la búsqueda. Modifique la búsqueda para ingresar una etiqueta de servicio (B959FS3) o un modelo (Latitude 5540) y vuelva a intentarlo.
Este controlador no es compatible
Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.
Inicie sesión en Windows como administrador para utilizar el escaneo automático. Si ya inició sesión como administrador y ve este mensaje, reinicie el sistema.El administrador de TI administra el sistema y es posible que las funciones sean limitadas.
Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.
Dell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización contiene cambios para mantener el estado general del sistema. Garantiza que el software del sistema permanezca actualizado y compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Formato de archivo:Una o varias imágenes de disco de autoextracción dentro de un .zip de autoextracción
File Name:INTEL_S320_FW0362.exe
Tamaño del archivo:1.64 MB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este archivo contiene o un conjunto de archivos comprimidos (o zipeados). Descargue el archivo a una carpeta en su disco duro y luego ejecútelo (haga doble clic) para descomprimir el conjunto de archivos. Siga las instrucciones para completar la instalación.
1. Load the .ISO image onto a blank CD (CD-R or CD-RW) using CD-ROM burning software of your choice. 2. Ensure the Intel SSD is attached to a SATA port in the system. For best results, ensure the SATA port is a native control port of your south bridge controller (generally SATA ports 0 through 4). SATA ports attached to a third-party SATA controller bridge chip or add-in SATA controller expansion cards are not recommended for use when updating the firmware. For more details, consult your system technical documentation. 3. Insert the Intel SATA SSD Firmware Update CD into the system. 4. Ensure the CD-ROM drive is enabled as a bootable device in BIOS and the CD-ROM boot priority is ahead of the drive containing the OS boot partition. For more details, consult your system documentation. 5. Complete a safe system shutdown and power off completely, count to 10 (seconds), and then reboot the system. A restart or warm reset (CTRL-ALT-DEL) is not adequate. 6. Power on your system to start the update process. - The tool will prompt you through the update process for all the SSDs that qualify for the firmware update in your system. - To verify that the firmware update is complete, power down per step 5 above with the CD still installed and let the firmware update software scan for SSDs in your system again. The scan should now display your SSD and the firmware should now show the new firmware number for your specific SSD. - Once the firmware has been verified, remove the CD and power down the system again. - If you changed SATA port mode from AHCI to "Compatibility" or or "Legacy" mode for the firmware update, ensure you change the port back to AHCI mode for best performance. Note: For computers booting into Windows 7 after a firmware update, a message appears when the operating system starts that prompts you to restart the computer. Restart when prompted. If you have questions about any of these steps, please contact Intel Customer Support for further assistance at the following website: http://www.intel.com/go/ssdsupport/
4. INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User) IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software.