No apague la computadora ni la desconecte de la fuente de alimentación mientras se actualiza el BIOS, ya que podría dañarse la computadora. Durante la actualización, la computadora se reiniciará y es posible que vea brevemente una pantalla negra.
Antes de la actualización, lea las instrucciones de instalación y la información importante que se indica a continuación.
Dell Server Custom BIOS, 6.0.7
INSTALADO AUTOMÁTICAMENTE Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.Comprobar compatibilidad
Ingrese los detalles del producto para ver la información más reciente del controlador para el sistemaIngrese su modelo o etiqueta de servicio de Dell
¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo
Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.
Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
* Updated the iDRAC Configuration Utility.
* Enabled C state Auto Demotion capability.
* Corrected an issue where ESXi 5.0 failed to boot in UEFI boot mode.
* Removed the word "Integrated" from "Integrated Daughter Card" BIOS string.
* Added FlexAddressPlus support for uncommonly partitioned and configured CNA cards.
* Corrected an issue where Single Bit Errors were not being detected when Memory Mode was set to Advanced ECC Mode and Node Interleaving was disabled.
* Updated nested Power Profile dependencies.
* Corrected an issue where UEFI Boot Manager was displaying multiple "EFI Fixed Disk boot device" string messages.
Versión
Fecha de publicación
Tipo de descarga
Categoría
Importancia
RecomendadoAl realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.
Instructions for 810F-060007-BSU-BDP.exe:
Important Notes:
1. This utility should only be used for installing a replacement motherboard. Use of this utility for other purposes may render the current application inoperable. Please consult Dell support/services before using this utility.
2. You must download the Non-Packaged BIOS flash utility executable file in addition to this file. Both files are necessary to run this utility.
Download
1. Click the "Download Now" link to download the Board Service Utility file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
4. Repeat steps 1 through 3 to download the Non-Packaged BIOS flash utility executable file.
Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files. Both the Board Service utility executable and the NonPackaged BIOS flash utility executable files must be copied to the same bootable media.
1. Browse to the location where you downloaded the files.
2. Update the name of each file to DOS recognizable format 8.3. If you do not update the filenames to 8.3 format, they will be truncated to 8.3 format.
3. Copy the files to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the Board Service Utility executable under DOS, providing the flash utility executable file name as the input argument. Follow the instructions of the utility.
Example
- Non-Packaged BIOS flash utility file is renamed to flash.exe
Boot to a DOS media, and run the command "810F-060007-BSU-BDP.exe flash.exe"
Important Notes:
1. This utility should only be used for installing a replacement motherboard. Use of this utility for other purposes may render the current application inoperable. Please consult your support/services before using this utility.
NOTE: In order to create BIOS update media using this package, this file must be downloaded to and executed on a system running Microsoft Windows. This package can be used to create a bootable, USB flash drive or CD.
Download
1. Select the download method you want to use to retrieve the file - either HTTP or FTP.
2. If the Export Compliance Disclaimer window appears, read the agreement and then select either "I agree" or "I disagree".
3. When the File Download window appears, click Save.
4. From the Save As dialog, select a location and a file name then click "Save".
5. If a Download Complete window appears, click Close.
BIOS Update Media Creation
1. Browse to the location where you downloaded the file and double-click it to extract the BIOS update files and start the distribution application.
2. Specify the location to unzip the files and click Unzip to extract files. After the files are extracted, a message should appear indicating that all files were successfully unzipped.
3. Click the OK button to start the BIOS Distribution Package. Follow the on screen prompts to cr