Dell SAS 6/iR Adapter, v.00.25.47.00.06.22.03.00 , A04
Es necesario reiniciar.INSTALACIÓN AUTOMÁTICASe ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Es posible que el contenido de esta página se haya traducido automáticamente. Si desea proporcionar comentarios, complete el formulario de la parte inferior de la página.
Se ha instalado este archivo automáticamente como parte de una actualización reciente. Si tiene algún problema, lo puede descargar y reinstalar manualmente.
Introduzca los detalles del producto para ver la información del controlador más reciente para su sistema
Búsqueda de asistencia
Introduzca la etiqueta de servicio de Dell o el modelo
¿Desea buscar un producto? Introduzca un identificador de producto.¿Cómo lo hago?
No se han encontrado resultados.No hemos encontrado ningún resultado para su búsqueda. Modifique la búsqueda e inténtelo de nuevo.
Este controlador no es compatible.
Este controlador no es aplicable para el producto seleccionado. Elija otro producto si desea reintroducir los detalles del producto para este controlador o visite la página Asistencia para productos si desea ver todos los controladores disponibles para un producto distinto.
Inicie sesión en Windows como administrador para utilizar los análisis automáticos. Si ya ha iniciado sesión como administrador y ve este mensaje, reinicie el sistema.Su administrador de TI gestiona el sistema y es posible que haya funciones limitadas.
Busque más actualizaciones. Utilice SupportAssist para buscar las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
BIOS - 06.22.03.00 NEW FUNCTIONALITY: None. DEFECT FIXES: -Implements a change to allow some RAID1 volumes created with earlier SAS 6/iR FW revisions to be migrated to controllers with this FW revision. - Implements a change to order the controller list based on defined controller type instead of static chip-based references - Updates verify functionality to allow user to escape once Reassign All has been selected and drive is no longer responding. - Removes rescan for devices on any keystroke in view array screen. Rescan will now only be performed on Alt+N keystroke.
FIRMWARE - 00.25.47.00 NEW FUNCTIONALITY: - Modifies coercion of RAID volumes to align with PERC. This facilitates migration of SAS6 RAID volumes to PERC6. DEFECT FIXES: -Implements a change to allow some RAID1 volumes created with earlier SAS 6/iR FW Revisions to be migrated controllers with this FW revision or later. -Improves robustness in handling Task Management events during heavy IO -Implements a change to correct an issue with initialization of interposer attached SATA drives where link to the drive could be left in a state where it was possible that I/Os could be timed out and have to be retried by the host.
Dell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización recoge cambios para mantener el estado general del sistema. Garantiza que el software del sistema esté actualizado y que sea compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Formato de archivo:Paquete de actualización para Microsoft Windows de 32 bits
Nombre de archivo:SAS-RAID_Firmware_6T2TK_WN32_00.25.47.00.06.22.03.00_A04.EXE
Tamaño de archivo:5.57 MB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Los paquetes de actualización Dell (DUP) en el formato de 32 bits de Microsoft Windows se han diseñado para ejecutarse en los sistemas operativos Microsoft Windows de 64 bits. Los paquetes de actualización Dell (DUP) en formato de 64 bits de Microsoft Windows solo se ejecutarán en los sistemas operativos Microsoft Windows de 64 bits. A la hora de seleccionar una actualización de un controlador de dispositivo, asegúrese de seleccionar la adecuada para su sistema operativo.
Para garantizar la integridad de la descarga, compruebe el valor de la suma de comprobación.
MD5:
6187d1acd2a29a1b0bd68d9ed4789a7d
SHA1:
5fcdb8dbb89c95962ec355814802c7aa36fdd3f6
SHA-256:
No disponible
Formato de archivo:Un archivo de GnuPG que contiene una firma criptográfica
Nombre de archivo:SAS-RAID_Firmware_6T2TK_LN32_00.25.47.00.06.22.03.00_A04.BIN.sign
Tamaño de archivo:194 Bytes
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
La firma de GnuPG para el paquete de actualización para Red Hat Linux puede utilizarse a fin de autenticar la identidad de Dell en el paquete de actualización para Red Hat Linux correlacionado.
Para garantizar la integridad de la descarga, compruebe el valor de la suma de comprobación.
MD5:
09d199c003966038a643403451616101
SHA1:
960216fb1a68cf23c8e6b5b895696e31a80e85f2
SHA-256:
No disponible
Formato de archivo:Paquete Zip externo
Nombre de archivo:DELL_SAS-6-IR-ADAPTER_A04_R197382.exe
Tamaño de archivo:563.47 KB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Este archivo contiene un conjunto de archivos comprimidos. Descargue el archivo en una carpeta del disco duro y, a continuación, haga doble clic en él para descomprimir el conjunto de archivos. Siga las instrucciones para realizar la instalación.
Para garantizar la integridad de la descarga, compruebe el valor de la suma de comprobación.
MD5:
4b11813d93d89a8fe4b925773e0581a2
SHA1:
No disponible
SHA-256:
No disponible
Formato de archivo:Paquete de actualización para Red Hat Linux
Nombre de archivo:SAS-RAID_Firmware_6T2TK_LN32_00.25.47.00.06.22.03.00_A04.BIN
Tamaño de archivo:3.65 MB
Se trata de un archivo de gran tamaño. Tardará un tiempo en descargarse, dependiendo de la velocidad de la conexión.
Descripción del formato:
Los paquetes de actualización de Dell para Linux pueden usarse como aplicaciones independientes que garantizan el cumplimiento de criterios de validación específicos antes de aplicar una actualización. Nota: Los paquetes de actualización para Linux son de código abierto. Consulte los detalles en la sección Léame de los paquetes de actualización de Dell para Linux.
- When viewing SATA physical disk properties from Ctrl-C or other management applications, Vendor Identification must be translated as "ATA" followed by blanks. Please see SATA translation specification, revision 5, pages 24-25 for more details.
- When multiple logical disks are configured on the SAS 6/iR and when viewing the logical disks from RAID Properties of the Ctrl-C BIOS utility, the order in which the logical disks are displayed may be reversed from the order in which they are created. This has no effect on the adapter functionality or boot order of the logical disks.
- When adding a SAS 6/iR controller to a system, either by physically adding an adapter or by enabling the integrated SAS controller in the system BIOS, the new controller may need to be added to the controller boot order in the SAS 6/iR BIOS configuration Utility. At POST, hit CTRL-C to enter the utility and verify or modify the controller boot order.
- Migration of RAID Volumes from SAS 6/iR controllers to PERC6 controllers is supported only for volumes originally created on SAS 6/iR controllers running FW revision 00.25.47.00 or later.
- This version of firmware will not ensure complete compatibility with an older version of the management application. OpenManage 5.5 or greater is recommended.
- It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
- Before updating the SAS controller firmware using the DUP package in a Linux system, it is necessary to upgrade the SAS controller driver. Executing the SAS controller firmware DUP update while running a native Linux driver may cause the system/data volumes on the SAS controller to become inaccessible or Read-Only.
The recommended steps to update the SAS controller using the firmware DUP package on a Linux system to this new software level are as follows: 1.Upgrade the driver 2.Reboot the system 3.Upgrade thefirmware 4.Reboot the system
The problem does not occur if the SAS controller FW is updated from a bootable device (non Linux environment).
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP). 2. Reboot for the new FW take effect 3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares. 4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost) 5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click onthe OK button to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click the OK button to exit from the installer.
Installation 1. Copy extracted files to bootable media. 2. Reboot system to bootable media. 3. Execute update.bat to perform flash. 5. After flash is complete, remove bootable media. 4. Reboot system for changes to take effect.
Windows Update Package:
Download 1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download 1. Click the Download Now linkto download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Read over the release information presented by executing the ./FRMW_LX_RXXXXXX.BIN --version command from the shell. 2. Download and install any prerequisites identified in the above step before proceeding. 3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell. 4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Import the Dell public key. (You only need to do this once on your system.) 2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.