Seagate ST5D for model number(s) DL1800MM0159 and DL2400MM0159.
AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This release contains firmware version ST5C for Seagate drives. Vendor model numbers DL1800MM0159 and DL2400MM0159.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your systemSearch support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
- Fix for potential drive offline during hot plug test.
- Fix for drive hang after power cycle during cross-download testing.
- Firmware change to fix drive assert if a seek error happened during a head switch with RAW enabled.
Read More- Fix for potential drive offline during hot plug test.
- Fix for drive hang after power cycle during cross-download testing.
- Firmware change to fix drive assert if a seek error happened during a head switch with RAW enabled.
Version
ST5D, A00
Release date
07 Jul 2023
Download Type
Firmware
Category
SAS Drive
Importance
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats View Important Information
File Format: Update Package for MS Windows 64-Bit.
File Name: SAS-Drive_Firmware_J388P_WN64_ST5D_A00_01.EXE
File Size: 12.21 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
e4d071f53e61f92feecf87c9523fe40b
SHA1:
c79960a7555fd115b91145ff7db78d0eeb9af859
SHA-256:
4a52a0b23978b9ccd9b4f1ab98cbbd4fbceb1f67bb95733e394d9fb7be9bfdcb
File Format: A GnuPG file which contains a cryptographic signature
File Name: SAS-Drive_Firmware_J388P_LN64_ST5D_A00_01.BIN.sign
File Size: 226 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
59a70cff841679474edf4b0ceab9b1e7
SHA1:
22f0eeaf4adc67624d2fc53fdd1b2bde99350812
SHA-256:
8340e1b4bc23130d42dcf517b082ed9cd230de95f1aed4b1674edd226eba0734
File Format: Update Package for Red Hat Linux
File Name: SAS-Drive_Firmware_J388P_LN64_ST5D_A00_01.BIN
File Size: 7.87 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
f5e4b7871ba3390f2ada78c0b2ddc9d1
SHA1:
c438f88e3f072078648d5dd9302d91e97c89ba02
SHA-256:
a7415a16b6fc5e72bbfe537365249bdd5ea2df8518307531d31cf3c7363f27b8
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Supported Operating Systems
Novell SuSE Linux ES 11
Windows Server 2008 x64
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Linux
Windows Server 2012
Not Applicable
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 7
Red Hat® Ent Linux 5
Red Hat® Enterprise Linux 8
Red Hat Enterprise Linux 9
Windows Storage Server 2012 R2
Novell SuSE Linux ES 10
SuSE Linux Desktop 11
SUSE Linux ES 12
SuSE Linux ES 15
Windows Server 2012 R2
Windows Server 2008 x86
Windows Server 2019 LTSC
Windows Server 2022 LTSC
Windows Server 2008 R2
Windows Storage Server 2012
Windows Server 2016
Applies to
Seagate Skybolt 1.8TB HDD 12Gbps SAS 2.5 10K 512e ISE
Model Number: DL1800MM0159
Regulatory Model Number: STT003
Vendor PN: 1XJ233-151
Seagate Skybolt 2.4TB HDD 12Gbps SAS 2.5 10K 512e ISE
Model Number: DL2400MM0159
Regulatory Model Number: STT003
Vendor PN: 1XK233-151
Installation instructions
Dell Update Package instructions for Windows Dup:
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Dell Update Package instructions for Linux DUP (RHEL/SLES/Ubuntu):
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and run the update by executing
"./ SAS-Drive_Firmware__LN__A00.BIN " from the shell.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions:
Download the latest GnuPG Signature of Dell Update Package from support.dell.com.
1. Browse to the location where you downloaded the file.
2. Read over the release information presented in the dialog window.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, SAS-Drive_Firmware__LN__A00.BIN.Sign.
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
Dell Update Package instructions for Linux DUP (RHEL/SLES/Ubuntu):
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and run the update by executing
"./ SAS-Drive_Firmware_
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions:
Download the latest GnuPG Signature of Dell Update Package from support.dell.com.
1. Browse to the location where you downloaded the file.
2. Read over the release information presented in the dialog window.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, SAS-Drive_Firmware_
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.