Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell EMC Server PowerEdge BIOS R440/R540/T440 Version 2.15.1
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This release highlights the Intel Purley Refresh IPU 2022.2 PV Reference Code version 622D07. For more information about specific items added and resolved in this BIOS version, see the Fixes and New and enhanced features sections.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your systemSearch support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
- When the Memory Operating Mode option in the Memory Settings menu is set to MultiRankSpareMode, multi-bit memory errors are generated in the System Event Log (SEL) or Lifecycle log.
- The Transport Layer Security (TLS) certificate associated with the HTTPS URL is not effectively applied during the HTTPS boot operation. This issue is observed only when using the IPv6 protocol because it breaks the CVE-2021-21571 fix.
Enhancements:
- Updated the "Processor and Memory Reference Code" for the second-generation Intel Xeon Processor Scalable Family to IPU 2022.2.
- Updated the Processor Microcode to version 0x6E05 for the Intel Xeon Processor Scalable Family
- Updated the Integrate Purley Refresh PV Candidate Reference Code Version 622D07
- Updated the Integrate AEP Release 1.0.0.3534 files to Purley Refresh UEFI Source
- Updated SPS to SPS_E5_04.01.04.804.0 (IPU 22.2) for Purley Refresh.
- Added support for second source AEP persistent memory (DPN: XVY68, X06-QS). It's the minimum version of BIOS required.
Read More- When the Memory Operating Mode option in the Memory Settings menu is set to MultiRankSpareMode, multi-bit memory errors are generated in the System Event Log (SEL) or Lifecycle log.
- The Transport Layer Security (TLS) certificate associated with the HTTPS URL is not effectively applied during the HTTPS boot operation. This issue is observed only when using the IPv6 protocol because it breaks the CVE-2021-21571 fix.
Enhancements:
- Updated the "Processor and Memory Reference Code" for the second-generation Intel Xeon Processor Scalable Family to IPU 2022.2.
- Updated the Processor Microcode to version 0x6E05 for the Intel Xeon Processor Scalable Family
- Updated the Integrate Purley Refresh PV Candidate Reference Code Version 622D07
- Updated the Integrate AEP Release 1.0.0.3534 files to Purley Refresh UEFI Source
- Updated SPS to SPS_E5_04.01.04.804.0 (IPU 22.2) for Purley Refresh.
- Added support for second source AEP persistent memory (DPN: XVY68, X06-QS). It's the minimum version of BIOS required.
Version
2.15.1, 2.15.1
Release date
09 Aug 2022
Download Type
System BIOS
Category
BIOS
Importance
UrgentDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Available formats View Important Information
File Format: Update Package for MS Windows 64-Bit.
File Name: BIOS_82H68_WN64_2.15.1.EXE
File Size: 28.1 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
254f3691f8ff687faf64dc6b99e46cb2
SHA1:
7f862cced5332796b48b55d49b8abf8c1c426a07
SHA-256:
b41bf0ad4588cedc7d8d74bdfce26681d2dee1eb13df24624b61f36bb115c3f6
File Format: A GnuPG file which contains a cryptographic signature
File Name: BIOS_82H68_LN64_2.15.1.BIN.sign
File Size: 226 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
f49a9e1cc95dc2f09fe7e142239100cb
SHA1:
d65c9d0ca322e669ea80bb24a351b2d2fd277f13
SHA-256:
797eca4bd1d4a65e7b3477bcad9cca7fee1266f17d52036db64411985dcac207
File Format: A self-extracting file for use in 64-bit machines
File Name: R440-021501.efi
File Size: 19.04 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains compressed content that can be executed from the EFI Shell or EFI Boot Manager. Download the file to the EFI partition on a removable media device. Insert the removable media, then reboot the system and run the program from the EFI Shell or EFI Boot Manager.
To ensure the integrity of your download, please verify the checksum value.
MD5:
c49470e1240d49a1fb18aeef3354eda6
SHA1:
d577171b85042b88341cf3efdf1b0d2a1a87da03
SHA-256:
8fd7414e2141b576d321c6cac60c0118e899d5416cefc7d23e4848965abed02d
File Format: An archive of PDF files to provide help and procedural information to the customers
File Name: R440R540T440_BIOS.2.15.1_RN.pdf
File Size: 248.57 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This format consists of an archive of PDF files used to provide help and procedural information to the customer. It is necessary to install the Adobe Acrobat Reader first to view the files in this archive.
To ensure the integrity of your download, please verify the checksum value.
MD5:
07fce3be0e2560734292a3984647ac26
SHA1:
9f18be22f1e4bfdec04ea22fa6b6cf7badf5ef98
SHA-256:
f6960638d326b1de14e19374377deb625ca3718712113d263c17cebec0a23e97
File Format: Update Package for Red Hat Linux
File Name: BIOS_82H68_LN64_2.15.1.BIN
File Size: 23.15 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
808b7c3d54843b5ecb975f9c41537125
SHA1:
3b60fc7eb170c782d78dd997f27bce85f9349f54
SHA-256:
869756487b4d3b339520dfe4ea587a0469463149d39753985511720d4c2aa5ab
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
When you try updating a BIOS version either under OS (by using an Update Package (DUP)) or under UEFI Shell (a .efi file), the system may take more time to complete the BIOS update process (in case of a system that has 14 TB memory, it takes around 30 minutes to complete the BIOS update process under Windows Server 2016). There are two ways to work around this issue:
- Use an out-of-band BIOS update method--IDRAC Graphical User Interface (GUI) or RACADM Command Line Interface (CLI) command.
- Physically reduce the memory capacity by removing a few memory modules (improves the speed of the BIOS update process), and then try again.
When you try installing one or more PCIe devices on the system and if the cards require more limited legacy I/O resources, then the system may adjust the legacy I/O resources between the stack and the reboot system automatically. If the system fails during the allocation of PCI resources, then a UEFI0256 error message is logged. You can perform one of the following actions and retry the operation:
- Remove unused PCIe card to free up legacy I/O space.
- Go to System Setup and disable unused PCIe card to free up legacy I/O space.
When you try installing one or more PCIe devices on the system and if the cards require more MMIO resources, then the system may adjust the MMIO resources between the stack and the reboot system automatically. If the system fails during the allocation of PCI resources, then a UEFI0134 error message is logged. You can perform one of the following actions and retry the operation:
- Remove unused PCIe card to free up MMIO space.
- Go to System Setup and enable the "Memory Mapped I/O above 4GB" option.
- Use an out-of-band BIOS update method--IDRAC Graphical User Interface (GUI) or RACADM Command Line Interface (CLI) command.
- Physically reduce the memory capacity by removing a few memory modules (improves the speed of the BIOS update process), and then try again.
When you try installing one or more PCIe devices on the system and if the cards require more limited legacy I/O resources, then the system may adjust the legacy I/O resources between the stack and the reboot system automatically. If the system fails during the allocation of PCI resources, then a UEFI0256 error message is logged. You can perform one of the following actions and retry the operation:
- Remove unused PCIe card to free up legacy I/O space.
- Go to System Setup and disable unused PCIe card to free up legacy I/O space.
When you try installing one or more PCIe devices on the system and if the cards require more MMIO resources, then the system may adjust the MMIO resources between the stack and the reboot system automatically. If the system fails during the allocation of PCI resources, then a UEFI0134 error message is logged. You can perform one of the following actions and retry the operation:
- Remove unused PCIe card to free up MMIO space.
- Go to System Setup and enable the "Memory Mapped I/O above 4GB" option.
Supported Operating Systems
Not Applicable
Applies to
Taurus BIOS
Installation instructions
Dell EMC Update Package Instructions for EFI
Download
1. Click the "Download" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell EMC Update Package Instructions for Linux DUP:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
-----------------------------------------------------
Dell EMC Update Package Instructions for Windows Dup:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
-----------------------------------------------------
GnuPG Signature of Dell EMC Update Package Instructions:
Download
1. Click the "Download" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell EMC public key. (You only need to do once on your system.)
2. Verify the Dell EMC Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Download
1. Click the "Download" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
--------------------------------------------------------------------------------
Dell EMC Update Package Instructions for Linux DUP:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
-----------------------------------------------------
Dell EMC Update Package Instructions for Windows Dup:
Download
1. Click the "Download" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
-----------------------------------------------------
GnuPG Signature of Dell EMC Update Package Instructions:
Download
1. Click the "Download" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell EMC public key. (You only need to do once on your system.)
2. Verify the Dell EMC Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.