Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell Embedded Box PC 5000 System BIOS
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package provides the BIOS update for Dell Embedded Box PC 5000 running the following Operation System: Windows and DOS.
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your systemSearch support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
- Updated the handling of pre-boot authentication information by firmware
- Updated UEFI variable input validation
- Updated the handling of 3rd party Option ROM loading
- Updated SPI flash command configuration settings
- Updated Intel ME Firmware to address security advisory INTEL-SA-00086 (CVE-2017-5705 & CVE-2017-5708)
- Update to the latest CPU microcode to address CVE-2017-5715
- Fixed Microsoft PBA (BitLocker) recovery key screen prompt issue when TPM Validation Profile PCR2 enabled
Enhancements:
- Support new WWAN card
Read More- Updated the handling of pre-boot authentication information by firmware
- Updated UEFI variable input validation
- Updated the handling of 3rd party Option ROM loading
- Updated SPI flash command configuration settings
- Updated Intel ME Firmware to address security advisory INTEL-SA-00086 (CVE-2017-5705 & CVE-2017-5708)
- Update to the latest CPU microcode to address CVE-2017-5715
- Fixed Microsoft PBA (BitLocker) recovery key screen prompt issue when TPM Validation Profile PCR2 enabled
Enhancements:
- Support new WWAN card
Version
1.4.2, 1.4.2
Release date
06 Feb 2018
Download Type
System BIOS
Category
BIOS
Importance
CriticalDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Available formats
File Format: CPG BIOS Executable for Windows/DOS
File Name: Embedded_Box_PC_5000_1.4.2.exe
File Size: 8.73 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
53053807e164076367b91d739d22c26e
SHA1:
d6ff6d66cc0bbb0ef668995a866d8ae6bf27fef6
SHA-256:
b9aa359590a66c50c08b3efed2d02f9f040a4192c22a215db06394fedb2a9578
By downloading, you accept the terms of the Dell Software License Agreement.
Applies to
Dell Embedded Box PC 5000 System BIOS
Installation instructions
[Run the BIOS update utility from Windows environment]
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users,Load Legacy Option ROM Disabled)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option"
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot List Option"
9. Change "Legacy" to "UEFI" Boot Option.
10. Load Legacy Option ROM->Enabled
11. Go to "Exit" > Exit Save Changes and reboot system
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt.
3. Run the file by typing copied file name where the executable is located.
4. DOS System will auto restart and update BIOS while system startup screen.
5. After BIOS update finished, system will auto reboot to take effect.
[Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users,Load Legacy Option ROM Disabled)]
1. Copy the downloaded file to a bootable DOS USB key.
2. Power on the system, then go to BIOS Setup by pressing F2 and go to "Boot > Boot List Option"
3. Change "UEFI" to "Legacy" of Boot List Option
4. Go to "Exit > Exit Save Changes" and reboot system.
5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt.
6. Run the file by typing copied file name where the executable is located.
7. After BIOS update finished, system will auto reboot.
8. Go to BIOS Setup by pressing pressing F2 and go to "Boot > Boot List Option"
9. Change "Legacy" to "UEFI" Boot Option.
10. Load Legacy Option ROM->Enabled
11. Go to "Exit" > Exit Save Changes and reboot system
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.