AUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
PowerVault 35F firmware version d9908e.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search to enter a service tag (B959FS3) or model (Latitude 5540) and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Version
d9908e, D9908E
Release date
06 Feb 2001
Download Type
Firmware
Category
Fibre Channel
Importance
Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
File Format:One or more self extracting disk images inside of a self extracting zip
File Name:D9908E.exe
File Size:553 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
The PowerVault 35F can either use FTP, TFTP or a serial connection (using the XMODEM protocol) to update the firmware. In order to update the firmware via the serial connection, the PowerVault 35F must be connected to a terminal emulation program supporting XMODEM transfers. This menu item does not appear when accessing the configuration menus through Telnet.
To download firmware using FTP:
1. Connect your computer to the PowerVault 35F’ s Ethernet port.
2. Start your FTP program using the PowerVault 35F’ s IP address:
ftp
Note: The default IP address is 1.1.1.1. See the Change IP Address section of this chapter for information on changing the PowerVault 35F IP address.
3. Use root as the user name and password as the password. To change the user name and password, see the Change Security Settings section of this chapter.
4. Specify binary mode:
bin
5. Specify the firmware’s path and filename with the put command: put
The file will transfer and the PowerVault 35F will reboot. The PowerVault 35F is now using the new firmware.
NOTE: You may want to confirm the new firmware level by checking the PowerVault 35F’s reboot messages through the serial interface.
To download firmware using TFTP:
1. Connect your computer using the PowerVault 35F’s Ethernet port.
2. At the command line, type the following command:
tftp -i put
The file will tranfer and the PowerVault 35F will reboot. The PowerVault 35F is now using the new firmware.
NOTE: You may want to confirm the new firmware level by checking the PowerVault 35F’ s reboot messages through the serial interface.
To download firmware using a terminal emulator:
NOTE: For quicker downloading, configure the PowerVault 35F and the terminal emulator utility session connected to it (such as Hyperterminal) to run at 115200.
1. Establish a Serial Connection to the PowerVault 35F.
2. From the Advanced Options menu, select the Download a new revision of the Firmware command to start the download procedure.
3. When you confirm you want to download, the PowerVault 35F will start the download process.
4. Use the Transfer® Send File option in the terminal emulator utility.
5. Select the location of the firmware. Use the Browse button, if you need help finding it.
6. Make sure you select XMODEM as the protocol.
7. Press the Send button.
8. The firmware will begin to download.
When the download is complete, the system verifies that the firmware image was successfully written to the FLASH memory and then reboots the PowerVault 35F. Upon reboot, the PowerVault 35F detects that there is a newly downloaded firmware image and copies that image to the boot sector of the FLASH and then boots with that image. At that point the PowerVault 35F is using the new firmware image.