American Megatrends (AMI) PERC 2/SC, PERC2/DC, v.4.21, A03
AUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Dell PowerEdge RAID Controller 2/SC, 2/DC, 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, PERC 4/Di, and CERC ATA100/4CH, Device Driver for Windows NT 4.0.
Version: 4.21
Recommended
Find the best download for your system
Please enter your product details to view the latest driver information for your system
Search support
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes or Enhancements in this Release
Enhancements:
1) None.
Fixes:
1) A fix was made in the Driver to initialize the data Structures for some of the IOCTL calls.
2) Driver no longer filters out all other commands except SCSI READ and SCSI WRITE
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
MD5:
0BEA91746EF294C939BAF93BDDF93608
SHA1:
Not available
SHA-256:
Not available
File Format:Extracts files directly to local disk
File Name:PERC2-NT421-A03.exe
File Size:84 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Dell PowerEdge RAID Controller 2/Sc, 2/DC, 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, 4/Di, and CERC ATA100/4CH, Device Driver for Windows NT 4.0
Version 4.21
Install Instructions
Download
1. Click the "Download Now" link to download the file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package. 2. Specify the location to unzip the files – the instructions below assume you extract files to a formatted floppy disk. 3. Click on the unzip button to extract files.
Installation
Dell PowerEdge RAID Controller 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, 4/Di, and CERC ATA100/4CH, Device Driver for Windows NT 4.0
Version 4.21
This program creates a Windows NT 4.0 driver diskette for the controllers. You will need a formatted 3 1/2 inch floppy diskette for the following procedure.
1) Download the file to a directory on your hard drive. The file downloaded is a self-extracting executable.
2) Double click on the file to run the executable.
3) Click on the unzip button to extract files to the floppy.
Power down the system and install the PERC/CERC card. Configure the logical drives before proceeding with the driver install described below.
Performing a New Installation of Windows NT 4.0
"Making PERC/CERC the Primary Controller in Windows NT 4.0"
1) Boot the system using the Windows NT 4.0 CD. As the message "Setup is inspecting your computer's hardware configuration." appears. Press F6 immediately.
2) Within a few seconds, the Windows NT Setup screen appears, requesting additional adapters in the system. Press 'S' to specify an additional device, then press Enter on the OTHER option in the selection screen.
3) Insert the PERC/CERC driver diskette created above and press Enter. "CERC ATA100/4ch; PERC2/3/4 Series Windows NT Driver" appears. Press Enter to load the driver.
4) Press 'S' to load additional mass storage device driver if required. Otherwise, press Enter to continue installation process as usual. Windows NT 4.0 continues to be installed as usual. Please refer to the operating system installation documentation for further steps.
"Making PERC/CERC a Secondary Controller in Windows NT 4.0"
1) Start the Windows NT 4.0 installation process. Load the device for the primary controller if necessary.
2) Windows NT Server Setup screen is displayed after loading Windows NT Kernel. Press Enter to continue.
3) Setup displays mass storage devices that it has recognized in your computer. Press 'S' to specify an additional device, then press Enter on the OTHER option in the selection screen.
4) Insert the PERC/CERC driver diskette created above and press Enter. "CERC ATA100/4ch; PERC2/3/4 Series Windows NT Driver" appears. Press Enter to load the driver.
5) Press 'S' to load additional mass storage device drivers if required; otherwise, press Enter to continue the installation process as usual. Windows NT 4.0 continues to be installed as usual. Please refer to the operating system installation documentation for further steps.
Adding the PERC/CERC Driver to an Existing Windows NT 4.0 Server
If your server is already running Windows NT 4.0, then use the following steps to add the PERC/CERC Windows NT 4.0 driver.
1) Insert the PERC/CERC driver diskette created above in appropriate drive. The driver files can also be installed from a local or network drive.
2) Click on Start > Control Panel > Settings. Double-click on the Small Computer System Interface (SCSI) Adapter icon.
3) Select the Drivers tab.
4) Click on the Add button.
5) Select Have Disk.
6) The Install From Disk box appears. Specify the l