Dell EMC OpenManage Integration Version 7.3 for Microsoft Endpoint Configuration Manager (MECM) and Microsoft System Center Virtual Machine Manager (SCVMM)
AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.OpenManage Integration for Microsoft System Center (OMIMSSC) is an appliance-based integration into System Center suite of products.
OMIMSSC enables full lifecycle management of Dell EMC PowerEdge servers by using integrated Dell Remote Access Controller (iDRAC) with Lifecycle Controller (LC).
OMIMSSC offers operating system deployment, Dell EMC HCI Solutions for Microsoft Windows server creation, hardware patching, firmware update and maintenance of servers and modular systems. Integrate OMIMSSC with Microsoft Endpoint Configuration Manager (MECM) previously known as Microsoft System Center Configuration Manager (SCCM) for managing the Dell PowerEdge servers in traditional data center, integrate OMIMSSC with Microsoft System Center Virtual Machine Manager (SCVMM) for managing The Dell PowerEdge servers in virtual and cloud environments
Supported Devices for Management:
- Support for latest iDRAC9 based PowerEdge servers.
- Dell EMC Windows server HCI Ready Nodes
- Dell EMC PowerEdge MX 7000 chassis and its components.
Note : For all other supported devices refer “Compatible Systems” section below.
This release is the immediate successor of OMIMSSC version 7.2.1 for SCCM and SCVMM.
For information about MECM, SCVMM, and SCCM brand name change see, the Microsoft documentation.
OMIMSSC enables full lifecycle management of Dell EMC PowerEdge servers by using integrated Dell Remote Access Controller (iDRAC) with Lifecycle Controller (LC).
OMIMSSC offers operating system deployment, Dell EMC HCI Solutions for Microsoft Windows server creation, hardware patching, firmware update and maintenance of servers and modular systems. Integrate OMIMSSC with Microsoft Endpoint Configuration Manager (MECM) previously known as Microsoft System Center Configuration Manager (SCCM) for managing the Dell PowerEdge servers in traditional data center, integrate OMIMSSC with Microsoft System Center Virtual Machine Manager (SCVMM) for managing The Dell PowerEdge servers in virtual and cloud environments
Supported Devices for Management:
- Support for latest iDRAC9 based PowerEdge servers.
- Dell EMC Windows server HCI Ready Nodes
- Dell EMC PowerEdge MX 7000 chassis and its components.
Note : For all other supported devices refer “Compatible Systems” section below.
This release is the immediate successor of OMIMSSC version 7.2.1 for SCCM and SCVMM.
For information about MECM, SCVMM, and SCCM brand name change see, the Microsoft documentation.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes
- During firmware update, the components selected for two identical servers gets updated individually as per the selection made by the user.
- While creating HCI Solutions for Microsoft Windows server cluster, the Quality of Service policy for the Mellanox/Qlogic card
on each cluster node allocates 50% to the SMB traffic as per recommendation.
- Windows operating system deployment from MECM console on Dell servers with PERC H730, H330 Adapter, H730 mini,
H330 mini controller in BIOS boot mode is supported.
- In HCI Solutions for Microsoft Windows server operational template, the compliance comparison report with predefined
operational template displays as Compliant.
- Filter on Maintenance Center is available for MX7000 Modular Systems.
Enhancements or features:
- Support for Microsoft Endpoint Configuration Manager (MECM) version 2203.
- Support for Microsoft Endpoint Configuration Manager (MECM) version 2103.
- Support for System Center Virtual Machine Manager (SCVMM) 2022.
- Support for System Center Virtual Machine Manager (SCVMM) 2019 UR3.
- Support for System Center Virtual Machine Manager (SCVMM) 2019 UR2.
- Support for System Center Virtual Machine Manager (SCVMM) 2016 UR10.
- Support for custom SSL certificate management.
- Cluster-Aware Updates for HCI and Failover clusters now includes the capability to perform driver updates combined with BIOS
and Firmware for Windows Server based clusters.
Support for new Intel-based iDRAC 9 based PowerEdge servers.
- R450
- R550
- R650
- R650xs
- R750
- R750xs
- R750xa
- C6520
- XR11
- XR12
- MX750c
- XE2420
Support for creation of Windows Server based HCI clusters, management and Cluster Aware Update of AX nodes and S2D
ready node.
- AX6515
- AX740xd
- AX640
- R440
- Support for WinPE driver injection using Dell EMC OpenManage server driver pack.
NOTE: DTK is End of Life product from Dell EMC. Use Dell EMC OpenManage server driver pack for WinPE drivers.
- Support for ESXi operating system deployment versions 7.0 U2, 7.0 U1 and 6.7 U3.
- Support for RHEL operating system deployment versions 7.9, 8.0, 8.3, 8.4.
- Restructured user document. (Installation guide, User's guide, and Troubleshooting information consolidated in a single unified document).
-Support for deploying the Dell EMC OMIMSSC appliance for OpenManage Integration for Microsoft Endpoint Configuration Manager
(MECM) and System Center Virtual Machine Manager (SCVMM) version 7.3 on the following VMware ESXi Hypervisor versions using .ova file:
- Version 6.5
- Version 6.7
- Version 7.0
along with the existing support for deploying Dell EMC OMIMSSC appliance for MECM and SCVMM on Hyper-V using .vhd file.
Read More- During firmware update, the components selected for two identical servers gets updated individually as per the selection made by the user.
- While creating HCI Solutions for Microsoft Windows server cluster, the Quality of Service policy for the Mellanox/Qlogic card
on each cluster node allocates 50% to the SMB traffic as per recommendation.
- Windows operating system deployment from MECM console on Dell servers with PERC H730, H330 Adapter, H730 mini,
H330 mini controller in BIOS boot mode is supported.
- In HCI Solutions for Microsoft Windows server operational template, the compliance comparison report with predefined
operational template displays as Compliant.
- Filter on Maintenance Center is available for MX7000 Modular Systems.
Enhancements or features:
- Support for Microsoft Endpoint Configuration Manager (MECM) version 2203.
- Support for Microsoft Endpoint Configuration Manager (MECM) version 2103.
- Support for System Center Virtual Machine Manager (SCVMM) 2022.
- Support for System Center Virtual Machine Manager (SCVMM) 2019 UR3.
- Support for System Center Virtual Machine Manager (SCVMM) 2019 UR2.
- Support for System Center Virtual Machine Manager (SCVMM) 2016 UR10.
- Support for custom SSL certificate management.
- Cluster-Aware Updates for HCI and Failover clusters now includes the capability to perform driver updates combined with BIOS
and Firmware for Windows Server based clusters.
Support for new Intel-based iDRAC 9 based PowerEdge servers.
- R450
- R550
- R650
- R650xs
- R750
- R750xs
- R750xa
- C6520
- XR11
- XR12
- MX750c
- XE2420
Support for creation of Windows Server based HCI clusters, management and Cluster Aware Update of AX nodes and S2D
ready node.
- AX6515
- AX740xd
- AX640
- R440
- Support for WinPE driver injection using Dell EMC OpenManage server driver pack.
NOTE: DTK is End of Life product from Dell EMC. Use Dell EMC OpenManage server driver pack for WinPE drivers.
- Support for ESXi operating system deployment versions 7.0 U2, 7.0 U1 and 6.7 U3.
- Support for RHEL operating system deployment versions 7.9, 8.0, 8.3, 8.4.
- Restructured user document. (Installation guide, User's guide, and Troubleshooting information consolidated in a single unified document).
-Support for deploying the Dell EMC OMIMSSC appliance for OpenManage Integration for Microsoft Endpoint Configuration Manager
(MECM) and System Center Virtual Machine Manager (SCVMM) version 7.3 on the following VMware ESXi Hypervisor versions using .ova file:
- Version 6.5
- Version 6.7
- Version 7.0
along with the existing support for deploying Dell EMC OMIMSSC appliance for MECM and SCVMM on Hyper-V using .vhd file.
Version
7.3, A00
Release date
22 Jun 2021
Download Type
Applications
Category
Systems Management
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Available formats View Important Information
File Format: Extracts files directly to local disk
File Name: OMIMSSC_v7.3.0.2948_for_VMM_and_ConfigMgr_A00.vhd.zip
File Size: 1.49 GB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
5c03a1806f58fb36d02d3f2c6abb99f3
SHA1:
0b71041850257438699cd1c4fefcbd7140d6a604
SHA-256:
3d8b482db70143e6ff07680028986d55395b2882dabbb2429abc345e69c6835a
File Format: Firmware Images
File Name: OMIMSSC_v7.3.0.2948_for_VMM_and_ConfigMgr_A00.ova.zip
File Size: 1.47 GB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
To ensure the integrity of your download, please verify the checksum value.
MD5:
0a9c61470c1e740be9c3fab23786e4a7
SHA1:
fddd4b83caf88e599fcccfc812b1930b8d6c13b2
SHA-256:
130cb62e2df9667c9135e4f7a3bba54d533c5534a4ec3ce903c70c3979d962a0
By downloading, you accept the terms of the Dell Software License Agreement.
Supported Operating Systems
Not Applicable
Windows Server 2012 R2
Windows Server 2019 LTSC
Windows Server 2016
VMware ESXi 6.5
VMware ESXi 6.7
VMware ESXi 7.0
Applies to
CUS, DF, 1VM, DLCI FOR VMM
DELL OpenManage Connection for
DLCI for VMM
MOD, DF, 1VM, DLCI FOR VMM
CUS,DF,1VM,DLCI FOR VMM
DLCI for VMM
MOD,DF,1VM,DLCI FOR VMM
Installation instructions
Download instructions:
1. Click the Download File link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
To extract the downloaded file:
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to extract the files.
4.Click OK to extract files. After the files are extracted the message "All files were successfully unzipped "will be displayed.
5.Click OK to exit from the download package.
To Install / Upgrade
Installation prerequisites:
To install the Dell EMC OMIMSSC 7.3, deploy the Dell EMC OMIMSSC 7.3 available as .vhd or .ova and enroll the Management
Server in Appliance Web Console.
For detailed installation, pre-requisites, configuration, upgrade, and uninstallation instructions, see the Dell EMC OpenManage
Integration for Microsoft System Center Version 7.3 for Microsoft Endpoint Configuration Manager and System Center Virtual
Machine Manager Unified User's Guide at Dell.com/openmanagemanuals.
Upgrade prerequisites
Service Pack upgrade from previous versions of OMIMSSC to OMIMSSC version 7.3 is not available.
- You can upgrade to OMIMSSC version 7.3 from previous versions by using backup and restore appliance the capability of OMIMSSC.
- Ensure OMIMSSC for MECM (SCCM) and SCVMM version 7.2 or 7.2.1 is deployed before restoring to OMIMSSC for MECM and SCVMM version 7.3
- Ensure that no jobs are running. If running, wait till the jobs are completed.
- Back up the OMIMSSC appliance data of the previous release from the appliance black console.
- Restore the data into OMIMSSC version 7.3 from Admin Portal
NOTE:
- For more information about the backup and restore procedure in previous versions, see the Backup OMIMSSC Appliance and Restore OMIMSSC Appliancesections in Dell EMC OpenManage Integration for Microsoft System Center for Microsoft Endpoint Configuration Manager and System Center Virtual Machine Manager Unified User's Guide.
For detailed system requirements and installation steps, refer to the product user guide here:
Open www.dell.com/openmanagemanuals.
Click on "OpenManage Integration for Microsoft System Center"
Click on the required OMIMSSC version.
Click on the "Documentation" tab.
You will find both the User Guide and Release Notes here.
1. Click the Download File link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
To extract the downloaded file:
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to extract the files.
4.Click OK to extract files. After the files are extracted the message "All files were successfully unzipped "will be displayed.
5.Click OK to exit from the download package.
To Install / Upgrade
Installation prerequisites:
To install the Dell EMC OMIMSSC 7.3, deploy the Dell EMC OMIMSSC 7.3 available as .vhd or .ova and enroll the Management
Server in Appliance Web Console.
For detailed installation, pre-requisites, configuration, upgrade, and uninstallation instructions, see the Dell EMC OpenManage
Integration for Microsoft System Center Version 7.3 for Microsoft Endpoint Configuration Manager and System Center Virtual
Machine Manager Unified User's Guide at Dell.com/openmanagemanuals.
Upgrade prerequisites
Service Pack upgrade from previous versions of OMIMSSC to OMIMSSC version 7.3 is not available.
- You can upgrade to OMIMSSC version 7.3 from previous versions by using backup and restore appliance the capability of OMIMSSC.
- Ensure OMIMSSC for MECM (SCCM) and SCVMM version 7.2 or 7.2.1 is deployed before restoring to OMIMSSC for MECM and SCVMM version 7.3
- Ensure that no jobs are running. If running, wait till the jobs are completed.
- Back up the OMIMSSC appliance data of the previous release from the appliance black console.
- Restore the data into OMIMSSC version 7.3 from Admin Portal
NOTE:
- For more information about the backup and restore procedure in previous versions, see the Backup OMIMSSC Appliance and Restore OMIMSSC Appliancesections in Dell EMC OpenManage Integration for Microsoft System Center for Microsoft Endpoint Configuration Manager and System Center Virtual Machine Manager Unified User's Guide.
For detailed system requirements and installation steps, refer to the product user guide here:
Open www.dell.com/openmanagemanuals.
Click on "OpenManage Integration for Microsoft System Center"
Click on the required OMIMSSC version.
Click on the "Documentation" tab.
You will find both the User Guide and Release Notes here.
Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.