Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
XPS ONE 2710 System BIOS
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
XPS ONE 2710 A09 BIOS for Windows 7 and Windows 8
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier.Show me how
No results found.We couldn't find anything for your search. Please modify your search to enter a service tag (B959FS3) or model (Latitude 5540) and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
Please run A09.exe directly if you already updated the BIOS to A06 or A08.
Attention! Once you upgraded the BIOS to A09. Please DO NOT downgrade the BIOS to any older version. Note! The SATA mode will be changed to AHCI after you flash the BIOS. The BIOS A09 enhanced the SATA Mode by automatically detecting SATA configuration and set to the correct mode accordingly when you click loading defaults as this --- BIOS Setup > Exit > Load Defaults; Please DO RUN 'Load Defaults' after you update BIOS A09; Be careful: That BIOS settings will be load to defaults except 'Boot Mode', 'Secure Boot Control' and 'Load Legacy OPROM'.
1. Boot into Windows. 2. Copy A09.EXE onto your desktop. 3. Execute A09.EXE by double click it. 4. Click Update when BIOS Update Program dialogue box pop up. 5. Make sure you don't interrupt the update process. 6. Do not turn off power or disconnect AC power source before update complete. 7. Press Yes to confirm the BIOS version you want to update and to start BIOS Update process. 8. Press Yes and then system will restart after BIOS update complete.
Reboot will be required
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.