Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell Precision 3630 Tower System BIOS
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Security Advisories INTEL-SA-00185 and INTEL-SA-00191. A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.
To view all drivers for your Precision 3630 XL Tower, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
Precision_3630_1.1.10.exe | 22.44 MBEnter the Service Tag of your device to check the compatibility of this download with your device.
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
CPG BIOS Executable for Windows/DOS
File Name:
Precision_3630_1.1.10.exe
File Size:
22.44 MB
Format Description
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
28bf38da0626bb1f807fe28edf7f752b
SHA1:
29d87b4c9fb1fb6e4ed0c0eaaca18e50e39a85ff
SHA-256:
e15b9f5b857a2257495103bc362063394bf713774e3e8b44e1f8ec3a8145f238
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
- Fixed the issue where the Secure Boot Option ROM Signature Verification is bypassed.
- Firmware updates to address the Intel Security Advisory INTEL-SA-00185 (CVE-2018-12188, CVE-2018-12190, CVE-2018-12191, CVE-2018-12192, CVE-2018-12199, CVE-2018-12198, CVE-2018-12200, CVE-2018-12187, CVE-2018-12196, and CVE-2018-12185).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00191 (CVE-2018-12201, CVE-2018-12202, and CVE-2018-12203).
Enhancements:
- Added the option to enable or disable Intel Active Management Technology (AMT) in BIOS.
- Updated the Intel Rapid Storage Technology application to version 17.0.2.3787.
Read More
- Fixed the issue where the Secure Boot Option ROM Signature Verification is bypassed.
- Firmware updates to address the Intel Security Advisory INTEL-SA-00185 (CVE-2018-12188, CVE-2018-12190, CVE-2018-12191, CVE-2018-12192, CVE-2018-12199, CVE-2018-12198, CVE-2018-12200, CVE-2018-12187, CVE-2018-12196, and CVE-2018-12185).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00191 (CVE-2018-12201, CVE-2018-12202, and CVE-2018-12203).
Enhancements:
- Added the option to enable or disable Intel Active Management Technology (AMT) in BIOS.
- Updated the Intel Rapid Storage Technology application to version 17.0.2.3787.
Version
1.1.10, 1.1.10
Release date
28 Mar 2019
Download Type
System BIOS
Category
BIOS
Importance
CriticalDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Important Information
BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
Other Available Versions
2.29.009 Jul 2024
2.28.009 May 2024
2.27.010 Apr 2024
2.26.005 Feb 2024
2.25.015 Dec 2023
2.24.015 Nov 2023
2.23.009 Aug 2023
2.22.220 Jun 2023
2.21.013 Apr 2023
2.20.010 Mar 2023
2.19.010 Jan 2023
2.15.008 Aug 2022
2.14.116 Jun 2022
2.13.028 Apr 2022
2.12.013 Jan 2022
2.11.011 Nov 2021
2.10.001 Sept 2021
2.9.119 Jul 2021
2.8.013 May 2021
2.7.018 Nov 2020
2.6.129 Jul 2020
2.5.015 May 2020
2.3.011 Mar 2020
2.4.205 Dec 2019
2.1.207 Aug 2019
2.2.007 Aug 2019
1.1.608 Jan 2019
Supported Operating Systems
BIOS
Looking for a different OS? View the list of Dell supported operating systems
Applies to
Dell Precision 3630 BIOS
Dell Precision 3630XLT BIOS
Installation instructions
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from BIOS Boot Menu (independent of operating system)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from BIOS Boot Menu (independent of operating system)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.