Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell EMC Server PowerEdge BIOS R440/R540/T440 Version 1.3.7
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This release contains new Intel Xeon Processor Scalable Family Processor Microcode to address CVE-2017-5715. CVE-2017-5753 and CVE-2017-5754 do not require a microcode update. This release fixes Intel Management Engine issue that causes first BIOS flash update attempt to fail after 24 days of server up-time. This release contains BIOS firmware version 1.3.7 for Dell EMC Server PowerEdge R440/R540/T440.
Recommended
Check compatibility
Enter your Dell Service Tag or model
Want to look up your product? Enter a product identifier. Show me how
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot. Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes
- BIOS takes a long time to handle correctable memory errors.
- Rarely, the system may stop at POST (Power-On-Self-Test) when running reboot test in the BIOS boot mode.
- Several NVMe-related defects.
- Resolved an Intel Management Engine related issue that caused the BIOS version update to fail (fails only when the server is kept turned on continuously for 24 days since the previous AC power cycle). See the Important notes section in this Release Notes.
Enhancements
- Updated the Intel Trusted Execution Technology (Intel TXT) BIOS Authenticated Code Module (ACM) to version 1.3.4.
- Updated the Intel Processor and Memory Reference Code to PLR3.1.
- To address CVE-2017-5715 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5715):
- Updated the Intel Xeon Processor Scalable Family Processor Microcode to version 0x43.
- CVE-2017-5753 and CVE-2017-5754 are addressed by the Operating System & Hypervisor updates.
- For more information, visit http://www.dell.com/support/article/SLN308588.
Read More- BIOS takes a long time to handle correctable memory errors.
- Rarely, the system may stop at POST (Power-On-Self-Test) when running reboot test in the BIOS boot mode.
- Several NVMe-related defects.
- Resolved an Intel Management Engine related issue that caused the BIOS version update to fail (fails only when the server is kept turned on continuously for 24 days since the previous AC power cycle). See the Important notes section in this Release Notes.
Enhancements
- Updated the Intel Trusted Execution Technology (Intel TXT) BIOS Authenticated Code Module (ACM) to version 1.3.4.
- Updated the Intel Processor and Memory Reference Code to PLR3.1.
- To address CVE-2017-5715 (http://www.cve.mitre.org/cgi-bin/cvename.cgi?name=2017-5715):
- Updated the Intel Xeon Processor Scalable Family Processor Microcode to version 0x43.
- CVE-2017-5753 and CVE-2017-5754 are addressed by the Operating System & Hypervisor updates.
- For more information, visit http://www.dell.com/support/article/SLN308588.
Version
1.3.7, 1.3.7
Release date
18 Feb 2018
Download Type
System BIOS
Category
BIOS
Importance
UrgentDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Available formats View Important Information
File Format: Update Package for MS Windows 64-Bit.
File Name: BIOS_J9VX2_WN64_1.3.7.EXE
File Size: 26.1 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages in native Microsoft Windows 64-bit format do not require that Microsoft WOW64 be installed on the Microsoft Windows Server.
To ensure the integrity of your download, please verify the checksum value.
MD5:
817365870d82b57aabfff9744ef0efcc
SHA1:
209ea7d37cd55fb0c75ecae4d59409d9adfa2f3c
SHA-256:
3372cf0d77893a389eac98f06303f476f1ff154a70f9804f62877a1411bcd906
File Format: A GnuPG file which contains a cryptographic signature
File Name: BIOS_J9VX2_LN_1.3.7.BIN.sign
File Size: 226 Bytes
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
To ensure the integrity of your download, please verify the checksum value.
MD5:
7fddac4f49b6b96897c103c3c293d928
SHA1:
fa459e054b32dd6572c71a79c3abe54426275cc3
SHA-256:
8a9a2ed480d2ae76681ffffdeaa67c2d2e3fe0a7bb6a5fcdff554885a3bcac83
File Format: A self-extracting file for use in 64-bit machines
File Name: BIOS_J9VX2_EFI_1.3.7.efi
File Size: 17.76 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file contains compressed content that can be executed from the EFI Shell or EFI Boot Manager. Download the file to the EFI partition on a removable media device. Insert the removable media, then reboot the system and run the program from the EFI Shell or EFI Boot Manager.
To ensure the integrity of your download, please verify the checksum value.
MD5:
76b1791d65fc884c7f256aac017f7ca0
SHA1:
c3dc78f9e8a5939c927fff6e9262a69163829f61
SHA-256:
1124a8e2b48e1d31ead3b922e036322e3267513a713790bfbe6ac16fb03df7fc
File Format: An archive of PDF files to provide help and procedural information to the customers
File Name: R440R540T440_BIOS.1.3.7_RN.pdf
File Size: 226 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This format consists of an archive of PDF files used to provide help and procedural information to the customer. It is necessary to install the Adobe Acrobat Reader first to view the files in this archive.
To ensure the integrity of your download, please verify the checksum value.
MD5:
82f2bfe3b99321f1cbd7dd8a38a4f7db
SHA1:
b21d0b23d72530a000fcedd9ffd5daf461369369
SHA-256:
4f7f71a01f1f2da0a5641212a1ec3c7edf06e08d71e3561ccd4c807f5e71b16d
File Format: Update Package for Red Hat Linux
File Name: BIOS_J9VX2_LN_1.3.7.BIN
File Size: 26.45 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
To ensure the integrity of your download, please verify the checksum value.
MD5:
c66da1afbf203b4da47eaaf576b2b62f
SHA1:
6e658b159d4c066ace0f0b08c4577a6b9903db00
SHA-256:
bc7aefe677bb7c7fa9d7d9adbb762d7b87fe29dac919017ed4935cf368e3389e
By downloading, you accept the terms of the Dell Software License Agreement.
Important Information
An Intel Management Engine related issue that caused the BIOS update to fail is resolved in this BIOS 1.3.7 version.
- This included remedy becomes effective only after the device is updated with this BIOS 1.3.7 version.
Warning: Running an iDRAC RACADM power cycle command while running an operating system causes an ungraceful shutdown.
- To work around this issue, AC power cycle the system or run the iDRAC RACADM power cycle command before updating the BIOS.
- The first attempt to upgrade to this 1.3.7 version will fail, but the second attempt will pass if done within 24 days after the first attempt.
- For more information about this issue and safely working around this issue, see:
PSQN SLN 309027 here: http://www.dell.com/support/article/us/en/04/SLN309027
Intel HSD125807 here:
https://www.intel.com/content/dam/www/program/design/us/en/documents/hsd125807-hmrfpo-timeout-ta-337128.pdf?asset=16254
- This included remedy becomes effective only after the device is updated with this BIOS 1.3.7 version.
Warning: Running an iDRAC RACADM power cycle command while running an operating system causes an ungraceful shutdown.
- To work around this issue, AC power cycle the system or run the iDRAC RACADM power cycle command before updating the BIOS.
- The first attempt to upgrade to this 1.3.7 version will fail, but the second attempt will pass if done within 24 days after the first attempt.
- For more information about this issue and safely working around this issue, see:
PSQN SLN 309027 here: http://www.dell.com/support/article/us/en/04/SLN309027
Intel HSD125807 here:
https://www.intel.com/content/dam/www/program/design/us/en/documents/hsd125807-hmrfpo-timeout-ta-337128.pdf?asset=16254
Supported Operating Systems
Not Applicable
Applies to
Taurus BIOS
Installation instructions
Dell EMC Update Package Instructions for EFI
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
----------------------------------------------------------------------
Dell EMC Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
----------------------------------------------------------------------
Dell EMC Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
----------------------------------------------------------------------
GnuPG Signature of Dell EMC Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell EMC public key. (You only need to do once on your system.)
2. Verify the Dell EMC Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
You can update the BIOS using a UEFI shell bootable media, such as a USB key.
1. Copy the file to the bootable device with UEFI shell.
2. Boot the system to UEFI shell by using the bootable device.
3. Run the executable (.efi) under the UEFI shell. Follow the instructions provided by the flash utility.
You can also load this executable directly from BIOS Boot Manager without a UEFI shell bootable media.
1. Copy the file to a USB device
2. Plug in the USB device and press F11 during POST to enter BIOS Boot Manager
3. Navigate to the System Utilities menu and select BIOS Update File Explorer
4. Select the USB device and navigate through the directory contents to find the executable (.efi)
5. Launch the executable and follow the instructions provided by the flash utility.
----------------------------------------------------------------------
Dell EMC Update Package Instructions for Linux DUP:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the "./[model]_BIOS_LX_[revision].BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./[model]_BIOS_LX_[version].BIN" from the shell.
5. Follow the remaining prompts to perform the update.
----------------------------------------------------------------------
Dell EMC Update Package Instructions for Windows Dup:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
----------------------------------------------------------------------
GnuPG Signature of Dell EMC Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation
1. Import the Dell EMC public key. (You only need to do once on your system.)
2. Verify the Dell EMC Update Package by using its signature file, [model]_BIOS_LX_[version].BIN.sign
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.Drivers help and tutorials
For more downloads go to the Drivers and downloads. For help on using the information on this page, please visit Driver Help and Tutorials.