Dell 2161DS Digital Switch, v.3.1.0.0 , 1.3 (A03-00)
AUTOMATISCH INSTALLIERTDiese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
Der Inhalt dieser Seite wurde möglicherweise automatisch übersetzt. Füllen Sie das Formular unten auf der Seite aus, um Feedback zu geben.
Diese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
2161DS KVM Firmware Update (1.3 / A03-00) for LDAP Support
Empfohlen
Kompatibilität prüfen
Bitte geben Sie Ihre Produktdetails ein, um die neuesten Treiberinformationen für Ihr System anzuzeigen.
Dell Service-Tag-Nummer oder Modell eingeben
Sie möchten Ihr Produkt suchen? Geben Sie eine Produktkennung ein.Anleitung
Keine Ergebnisse gefunden. Wir konnten für Ihre Suchanfrage keine Ergebnisse finden. Ändern Sie Ihre Suche, um eine Service-Tag-Nummer (B959FS3) oder ein Modell (Latitude 5540) einzugeben, und versuchen Sie es erneut.
Dieser Treiber ist nicht kompatibel.
Dieser Treiber ist für das ausgewählte Produkt nicht verfügbar. Wählen Sie ein anderes Produkt aus, um Ihre Produktdetails für diesen Treiber erneut einzugeben, oder besuchen Sie die Seite Produktsupport, um alle Treiber für ein anderes Produkt anzuzeigen.
Melden Sie sich bei Windows als AdministratorIn an, um den automatischen Scan zu nutzen. Wenn Sie bereits als AdministratorIn angemeldet sind und diese Meldung angezeigt wird, führen Sie einen Neustart durch.Ihr System wird von Ihrem IT-Administrator verwaltet und die Funktionen sind möglicherweise eingeschränkt.
Weitere Updates finden. Nutzen Sie SupportAssist, um alle aktuellen Treiberupdates für Ihr Gerät zu finden.
Fehlerkorrekturen und Verbesserungen
Features and Enhancements: - Active Directory support for digital KVMs through LDAP
Dell Technologies empfiehlt, dieses Update zu überprüfen, um festzustellen, ob es für Ihr System gilt. Das Update enthält Änderungen, die sich nur auf bestimmte Konfigurationen auswirken, oder bietet neue Funktionen, die für Ihre Umgebung gelten können aber nicht müssen.
Dies ist eine große Datei. Abhängig von Ihrer Verbindungsgeschwindigkeit kann das Herunterladen einige Zeit in Anspruch nehmen.
Beschreibung des Dateiformats:
Diese Datei umfasst einen Satz komprimierter oder gezippter Dateien. Laden Sie die ZIP-Datei in einen Ordner auf der Festplatte herunter und entpacken Sie sie mit einem Doppelklick. Befolgen Sie die Anweisungen, um die Installation abzuschließen.
This firmware is meant for use only on legacy 2161DS systems. It is not compatible with newer 2161DS-2 or 4161DS systems. For LDAP support on newer 2161DS-2 or 4161DS systems, please use the appropriate firmware available at support.dell.com.
1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click on the OK button to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click the OK button to exit from the installer.
Upgrading Firmware Using a Serial Console
To upload a new FLASH file to the 2161DS Console Switch: 1. Connect a terminal or PC running terminal emulation software (such as HyperTerminal) to the configuration port on the back panel of the 2161DS Console Switch using the supplied serial cable. The terminal should be set to 9600 baud, 8 bits, 1 stop bit, no parity, and no flow control. 2. If the 2161DS Console Switch is not powered up, turn it on now. The Power indicator on the front of the unit will blink for 30 seconds while performing a self-test. Approximately 10 seconds after it stops blinking, press the ENTER key to access the main menu. 3. You will see the Terminal Applications menu with seven options. Select option 2, Firmware Management. 4. Select option 1, FLASH Download. 5. Type the IP address of your TFTP server and press the ENTER key. 6. Type the name of the appropriate languaged FLASH file and press the ENTER key. 7. Confirm the TFTP download by typing a y or yes and pressing the ENTER key. 8. The 2161DS Console Switch will verify that the file you downloaded is valid. 9. The 2161DS Console Switch will begin the FLASH upgrade process. On-screen indicators will display the upgrade progress. When the upload is complete, the 2161DS Console Switch will reset and upgrade the internal subsystems. 10. Once the upgrade is complete, a verification message will appear on screen.