AUTOMATISK INSTALLERETDenne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.
Indholdet på denne side er muligvis blevet oversat automatisk. Udfyld formularen nederst på siden for at give feedback.
Denne fil blev automatisk installeret som en del af en nylig opdatering. Hvis du oplever problemer, kan du downloade og geninstallere manuelt.
Windows Server 2003 IA64 Driver for the PERC 4/DC RAID Controller.
Version 6.46.2.64
Anbefalet
Tjek kompatibilitet
Indtast produktoplysningerne for at få vist de seneste driveroplysninger for dit system
Indtast din Dell-servicekode eller -model
Vil du søge efter dit produkt? Indtast et produkt-id.Vis mig hvordan
Søgningen gav ingen resultater.Vi kunne ikke finde nogen match til din søgning. Rediger din søgning for at indtaste en servicekode (B959FS3) eller model (Latitude 5540), og prøv igen.
Denne driver er ikke kompatibel
Denne driver er ikke relevant for det valgte produkt. Vælg et andet produkt for at indtaste dine produktoplysninger for denne driver igen, eller gå til siden Produktsupport for at se alle drivere til et andet produkt.
Log på Windows som administrator for at bruge automatisk scanning. Hvis du allerede er logget på som administrator og får vist denne meddelelse, skal du genstarte enheden.Dit system administreres af din it-administrator, og funktionaliteten kan være begrænset.
Find flere opdateringer. Brug SupportAssist til at finde alle de seneste driveropdateringer til din enhed.
Programrettelser og forbedringer
W2K3 6.46.2.64
1. If the Adapter is set to DEAD, all the IOCTLs sent to the driver will be returned with a special signature 0xEE to identify that the adapter is DEAD and not responding.
2. During Bus Reset, the driver issues a call to the F/W and returns without waiting for the call to finish and asks for the next request from OS. This next request got issued to the F/W even before the reset call completed resulting in the reservation conflict. Now the driver does not issue the next command until the reset call to the F/W completes.
3. SCSI commands issued to the Dummy Device exposed by the driver was not handled properly. Driver should have rejected all the commands issued to the Dummy Device except for the SCSIOP_INQUIRY and SCSIIO_READ_CAPACITY. This was causing the system to blue screen when using utilities sending SCSI commands to the Dummy Device. This release driver handles all the SCSI commands issued to the driver gracefully.
Dell Technologies anbefaler, at denne opdatering installeres under den næste planlagte opdateringscyklus. Opdateringen indeholder ændringer, der skal opretholde systemets generelle tilstand. Den sørger for, at systemsoftwaren forbliver opdateret og kompatibel med andre systemmoduler (firmware, BIOS, drivere og software) og kan indeholde andre nye funktioner.
Custom Instructions for perc-w2k3-6.46.2.64-A02.exe:
Updating an Existing Windows 2003 Driver ----------------------------------------
Perform the following steps to update the Windows driver for the RAID controller already installed on your system.
NOTE: It is important that you idle your system before you update the driver.
1. Press Start > Control Panel > System. The System Properties screen displays. 2. Click on the Hardware tab. 3. Click the Device Manager button and the Device Manager screen displays. 4. Click SCSI and RAID Controllers. 5. Double-click the RAID controller for which you want to update the driver. 6. Click the Driver tab and click on Update Driver. The screen for the Upgrade Device Driver Wizard displays. 7. Insert the appropriate driver diskette. 8. Click Next. 9. Follow the steps in the Wizard to search the diskette for the driver. 10. Select the name of the driver, not the INF file. 11. Click Next and continue the installation steps in the Wizard. 12. Click Finish to exit the wizard and reboot the system for the changes to take place.
Refer to the readme file perc-w2k3-6.46.2.64-A02.txt for further driver installation instructions. Custom Instructions for perc-w2k3-6.46.2.64-A02.txt:
Download the readme file (perc-w2k3-6.46.2.64-A02.txt) to view information about this release.