How to Replace CMC for PowerEdge VRTX

This video will demonstrate replacement procedure of a CMC for PowerEdge VRTX.

Removing a CMC card:
Open the system.
Turn the two release tabs upward to disengage the CMC card from the CMC connector on the system board.
Holding the release tabs, lift the CMC card from the CMC connector and slide it out of the card support bracket.
a. CMC card connector on system board
b. release tabs (2)
c. CMC card indicators (2)
d. CMC card
e. CMC card support bracket

Installing a CMC card:
Align the CMC card with the card support bracket, and holding the release tabs, slide it down the bracket.
Lower the CMC card into the CMC connector on the system board.
Lock the CMC card into the CMC connector by rotating the release tabs downward, until firmly seated.
Close the system.