Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
Some article numbers may have changed. If this isn't what you're looking for, try searching all articles. Search articles

How to Identify Dell Wired Docking Station Diagnostic Indicators

Summary: The following article provides information about how to use the diagnostic indicators that are built into Dell Wired Docking Stations from the WD series.

This article applies to   This article does not apply to 

Instructions


Table of Contents:

  1. Introduction
  2. Compatible Docking Stations
  3. Docking Station Power LED
  4. Docking Cable LED
  5. Docking Station AC Adapter LED

 

Introduction

 

This article explains how to use the diagnostic LEDs on the Dell Wired Dock (WD) series of docking stations.

Note: Some people may find it confusing that the LED on the docks power button is off during normal operation. This was done to minimize light pollution and distractions for the person using the dock. Do not assume that the dock has no power if the dock's power button LED is not lit.

There are three diagnostic LEDs that are useful for troubleshooting a docking station that appears to be unresponsive, not detected, or no power:

  • The LED on the docking station power button.
  • The LED on the docking station USB Type-C docking cable.
  • The LED on the docking station AC adapter pack.


Back to Top


 

Compatible Docking Stations

 

This article applies to the following docking stations from Dell:

  • Dell Docking Station WD19
  • Dell Docking Station WD19S
  • Dell Performance Dock WD19DC Dual Cable
  • Dell Performance Dock WD19DCS Dual Cable
  • Dell Thunderbolt Dock WD19TB
  • Dell Thunderbolt Dock WD19TBS
  • Dell Thunderbolt 4 Dock WD22TB4


Back to Top


 

Docking Station Power LED

 

Dock Power Button LED

(Figure.1 Power Button LED)

  • The LED on the power button does not indicate that the dock has power.
  • The light remains off during normal operation to minimize distractions and light pollution. It may appear to be faintly lit, if viewed in a dark room.
  • The Power On Self-Test - The power button LED flashes three (3) times indicating that the dock has power and is working. The flashing does not indicate a problem. This self-test only happens if you unplug the dock from the computer, unplug the AC adapter from the dock, then plug the AC adapter back in while the dock is disconnected from the computer:
    • Hard Reset: Unplug all the devices from the dock before doing the self-test. Hold the power button down for at least 30 seconds with the AC adapter disconnected. It drains any residual power in the circuits. This procedure can recover docks that are unresponsive or devices that are not working.


Back to Top


 

Docking Cable LED

 

Docking Cable LED

(Figure.2 Type-C Docking Cable LED)

  • This light is on the USB Type-C connector that plugs into the computer from the docking station.
  • It is the best indicator that the docking station has power and connectivity to the computer.
  • It should be lit whenever the computer is connected.
  • The WD19DC and WD19DCS have two (2) docking cables, with LEDs on both cables. Both LEDs should be lit when connected to a computer with dual Type-C ports that support power, data and video.
  • If the docking cable LED is off, then either there is an issue with the connection, or the dock has no power:
    • Try reseating the cable to the port on the computer.
    • Check the AC Adapter LED to confirm it is providing power.
    • Try the hard reset procedure and confirm that the self-test passes.
    • Run the docking station diagnostics in the latest version of Dell SupportAssist on the connected computer.
    • Contact Dell technical support for additional troubleshooting.


Back to Top


 

Docking Station AC Adapter LED

 

AC Adapter Light Ring

(Figure.3 AC Adapter Pack Cable LED Ring)

Note: Most modern AC adapters use a light ring on the adapter cable. It is behind the connector where it plugs into the laptop or device and lights up to indicate it is supplying power. (See Figure.3) However, you need to be aware that the power LED on some older AC adapters is located on the main body of the adapter.
 
  • If the LED on the AC adapter is lit, this indicates that the adapter is working:
    • Follow the cable back from the docking station to avoid confusing it with other AC adapters.
    • Confirm that it is the correct 130 Watt, 180 Watt, or 240 Watt Dell adapter that came with the docking station.
    • Reseat the power connector to the docking station.
    • If the docking station still appears to have no power, then see the troubleshooting in the docking cable section.
  • If the LED is off:
    • Try unplugging the power cable from the AC adapter and from the outlet socket. Then, plug it back in.
    • Try a power outlet socket that you know is working, to rule out an external power issue.
    • Try a compatible AC adapter from a different Dell dock that you know is working, if possible. To rule out a docking station issue.
    • Contact Dell technical support for additional assistance.


Back to Top


Affected Products

Dell Dock WD19, Dell Performance Dock - WD19DC, Dell Performance Dock – WD19DCS, Dell Dock – WD19S, Dell Thunderbolt Dock - WD19TB, Dell Thunderbolt Dock – WD19TBS, Dell Thunderbolt Dock – WD22TB4
Article Properties
Article Number: 000202072
Article Type: How To
Last Modified: 21 Oct 2022
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.