How to Replace a 40 millimeter fan in a PowerEdge C6600

This video demonstrates the process of removing and installing a 40 millimeter fan in a PowerEdge C6600.

In this video we show how to replace the 40 millimeter cooling fan on a PowerEdge C6600.

Before removing the 40 millimeter cooling fan read through and follow the safety guidelines to protect your system from potential damage and ensure your personal safety.

For more information about safety guidelines, see the C6600 Service Manual at: Dell.com/support In order to remove the 40 millimeter cooling fan you must first remove the cover.

To remove the cover, press and hold the cover release latch down. Slide the cover towards the rear of the system. Then lift the cover off the system.

To remove a 40 millimeter cooling fan, hold the blue tab on the fan cage and lift it up and free of the chassis. To install a 40 millimeter cooling fan, align and slide the fan into the chassis until secured in place.

To install the cover, align the system cover with the guide slots and place it one the chassis. Finally, slide the cover toward the front of the chassis until it locks into place.

For more information or support visit Dell.com/Support.