How to replace the speaker on OptiPlex Micro Plus 7020/OptiPlex Micro 7020

Learn how to replace the speaker on OptiPlex Micro Plus 7020/OptiPlex Micro 7020. This video shows how to remove and install the speaker on OptiPlex Micro Plus 7020/OptiPlex Micro 7020. Before you begin, power off the computer, and disconnect all the attached peripherals. Ensure that you always use ESD protection when working inside the system. If you need more information or assistance, go to dell.com/support.

In this video, we show how to replace the speaker on an OptiPlex Micro 7020 or OptiPlex Micro Plus 7020. Ensure that you always use ESD protection when working inside the computer. Turn off the computer and disconnect all the attached peripherals.

Loosen the thumb-screw that secures the side cover to the chassis. Slide and lift the cover off the chassis. Disconnect the speaker cable from its connector on the system board and remove the cable from the routing guides on the fan assembly.

Press and hold the release tab on the speaker before lifting it away from the support bracket. Now, let's install the speaker. Press and hold the release tab on the speaker before placing it on the support bracket. Release the tab to secure the speaker to the bracket. Then, place the speaker cable into its routing guides on the fan assembly before connecting the cable.

Align the side cover on the chassis. and slide in the cover. Then, tighten the thumb-screw to secure the cover to the chassis.

If you need more information or assistance on the OptiPlex Micro 7020 or OptiPlex Micro Plus 7020, visit Dell.com/Support.