Remove:
a. battery
b. SD card
c. base cover
d. keyboard
e. palmrest
Removing the Display Assembly
Remove the screw that secures the display assembly to the computer.
Disconnect the LVDS and camera cable from the system board. Disconnect the antenna cables from the wireless solution.
Unroute the cables from the slot.
Remove the screw and pull the antenna cables from the holes on the base chassis that secure the display assembly to the computer.
Remove the screws that secure the display assembly to the computer and lift the display assembly from the computer.
Installing the Display Assembly:
Insert the LVDS and wireless antenna cables through the holes on the base chassis and connect them.
Place the display assembly onto the computer.
Tighten the screws on both sides to secure the display assembly.
Route the antenna and the LVDS cables through the routing channel.
Connect the LVDS and camera cable to the computer.
Connect the antenna cables to the wireless solution.
Install:
a. palmrest assembly
b. keyboard
c. base cover
d. SD card
e. battery
